TITLE

Application of Synthesized Minerals from Bentonite on the Improvement of Engineering Properties of Soil Materials

AUTHOR(S)
Ismail, Ali I. M.; Souaya, Eglal R.; Shelbaia, Waleid I.
PUB. DATE
May 2014
SOURCE
Journal of Applied Sciences Research;May2014, Vol. 10 Issue 5, p393
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The research paper discusses the improvement of soil materials by the preparing zeolite from bentonite as low-cost adsorbent materials. Evaluated applications include the efficiency of the studied raw materials and their synthesis products for the improvement of engineering parameters of clay rich materials. The synthetic Na-P1 zeolite is investigated by powder X-ray diffraction (XRD) analysis, Scanning electron microscope (SEM) which attached with EDX Unit (Energy-dispersive X-ray spectroscopy). The stabilization and modification of clay soil materials are detected as swelling and shrinkage limit decrease by the addition of various amount of the prepared zeolite.
ACCESSION #
96978193

 

Related Articles

  • Preparation and Characterization of Iron-Oxide-Coated-Zeolite Adsorbent. Li Zhu; Yanqin Lu; Zhaoju He // Advanced Materials Research;2014, Vol. 941-944, p216 

    In this paper, Iron-Oxide-Coated-Zeolite has been prepared by using natural zeolite and ferric nitrate. The morphology and structure of the adsorbent were Characterized by Scanning electron microscopy (SEM), powder X-ray diffraction (XRD), and Fourier transform infrared spectrometer (FTIR). The...

  • XRD AND SEM STUDY OF POST SYNTHETIC MODIFIED LOW SILICA ZEOLITES. GORE, K. U. // Indian Streams Research Journal;May2013, Vol. 3 Issue 4, Special section p1 

    The idea of introducing foreign atom in to the crystal lattice of the solid zeolites are to change their catalytic activity and selectivity of the products and the reactants The selective samples of post Synthetic low silica modified Na-Y zeolite are studied in the present paper. The post...

  • Obtenção e caracterização de membranas cerâmicas tubulares a partir de massas incorporadas com argila, caulim e quartzo. Chaves, A. C.; Lira, H. L.; Neves, G. A.; Silva, F. A.; Lima, R. C. O.; França, K. B. // Ceramica;2013, Vol. 59 Issue 349, p192 

    The technology that involves the use of ceramic membranes has become in the last decades an important separation technique. The main reasons in the advance of this technology are related to the fact that work without addition of chemical reagents, low consumption of energy, ease to processing...

  • Mecanosíntesis y caracterización de ferrita de manganeso. Pedro, Vera-Serna; Bolarín-Miró, Ana M.; Félix, Sánchez-De Jesús; Antonia, Martínez-Luévanos // Superficies y Vacío;2011, Vol. 24 Issue 2, p34 

    Mechanosynthesis process was applied to obtain manganese ferrite with formula MnFe2O4, powder oxides of MnO (99% purity) and Fe2O3 (99% purity) was used as raw materials. The high energy milling was performed under air atmosphere using stainless steel vials and hardness steel balls. X-ray...

  • Molten salt synthesis and luminescence properties of BiSiO powders. Jiang, Hongtao; Wang, Xiufeng; Hao, Gang; Wang, Lili // Journal of Materials Science: Materials in Electronics;Feb2013, Vol. 24 Issue 2, p814 

    In this paper, Bismuth silicate (BiSiO, BSO) powders were prepared by reaction in molten salts (NaCl and KCl) using BiO and SiO powders as raw materials. The effects of salt contents and excessive contents of BiO and SiO were characterized by X-ray diffraction and scanning electron microscopy....

  • Characterization of Chemical Composition and Microstructure of Natural Iron Ore from Muko Deposits. Muwanguzi, Abraham J. B.; Karasev, Andrey V.; Byaruhanga, Joseph K.; Jönsson, Pär G. // ISRN Materials Science;2012, p1 

    The study aimed at investigating the chemical composition and microstructure of raw iron ore from the deposits in Muko area (south-western Uganda). The quality of this iron ore was evaluated to establish its suitability to serve as a raw material for iron production. Samples were taken from the...

  • Effect of sintering pressure on hot press sintering of 17Ni/(10NiO-NiFe2O4) cermet. Dong, W. Z.; Lin, Q. Q.; Li, Y. T.; Huang, W. // Materials Research Innovations;Jul2014 Supplement 4, Vol. 18 Issue S4, p510 

    The sintering behaviour of 17Ni/(10NiO-NiFe2O4) cermet not only is influenced by the characteristics and impurities of the raw materials but also is dependent on extra pressure during the fabrication process. Our work was concerned with the effect of sintering pressure on the relative density,...

  • MICROSTRUCTURE CHARACTERIZATION OF POROUS MICROALLOYED ALUMINIUM-SILICATE CERAMICS. Purenović, J.; Mitić, V. V.; Paunović, V.; Purenović, M. // Journal of Mining & Metallurgy. Section B: Metallurgy;2011, Vol. 47 Issue 3, p157 

    Kaolinite and bentonite clay powders mixed with active additives, based on Mg(NO3)2 and Al(NO3)2, sintered at high temperatures produce very porous ceramics with microcrystalline and amorphous regions and highly developed metalized surfaces (mainly with magnesium surplus). Microstructure...

  • Adsorptive removal of acid red from aqueous solutions by cationic surfactant-modified bentonite clay. Mullassery, Manohar D.; Fernandez, Noeline B.; Anirudhan, Thayyath S. // Desalination & Water Treatment;Nov2015, Vol. 56 Issue 7, p1929 

    The performance of hexadecyltrimethylammonium chloride (HDTMA)-intercalated bentonite clay (organoclay) for the removal of acid red (AR) from aqueous solutions has been evaluated in this study. The adsorbent HDTMA-modified bentonite clay was prepared by the reaction of Na-bentonite with (HDTMA+)...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics