TITLE

A New Means of Measuring the Thermal and Heating Engineering Parameters of Materials and Constructions for Monitoring and Diagnostics

AUTHOR(S)
Aksenov, D.
PUB. DATE
June 2014
SOURCE
Measurement Techniques;Jun2014, Vol. 57 Issue 3, p320
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A new means of measuring the thermal and heating engineering parameters of materials and constructions, employed in monitoring and diagnostics, is proposed. Some problems that arise during measurements are also considered.
ACCESSION #
96955825

 

Related Articles

  • The Influence of Thermal Bridges on the Energy Need for Heating after Renewal: A Case Study. Menďan, Rastislav; Pavčeková, Monika // Applied Mechanics & Materials;2016, Vol. 824, p307 

    The contribution deals with the influence of additional heat loss caused by thermal bridges of a building on the energy need for heating. Calculations and comparisons were carried out for a simple characteristic family house built in the sixties in the last century. The family house was...

  • Energy Analysis of Selected Air Distribution System of Heating, Ventilation and Air Conditioning System: A Case Study of a Pharmaceutical Company. KUMAR, DILEEP; MEMON, RIZWAN AHMED; MEMON, ABDUL GHAFOOR // Mehran University Research Journal of Engineering & Technology;Jul2017, Vol. 36 Issue 3, p745 

    The higher energy consumption causes environmental degradation along with depletion of conventional energy resources. The share of energy consumption in buildings is increasing with urbanization and that ultimately requires effective measures for energy conservation. In buildings, HVAC (Heating...

  • Latent Heating Contribution from Precipitation Systems with Different Sizes, Depths, and Intensities in the Tropics. Liu, Chuntao; Shige, Shoichi; Takayabu, Yukari N.; Zipser, Edward // Journal of Climate;Jan2015, Vol. 28 Issue 1, p186 

    Latent heating (LH) from precipitation systems with different sizes, depths, and convective intensities is quantified with 15 years of LH retrievals from version 7 Precipitation Radar (PR) products of the Tropical Rainfall Measuring Mission (TRMM). Organized precipitation systems, such as...

  • DON'T GET All Fired Up. Ebadat, Vahid // Process Heating;Oct2011, Vol. 18 Issue 10, p27 

    The article presents information regarding self-heating of particulate solids during heating process. It specifically discusses several laboratory tests which simulate self-heating behavior. It is informed that self-heating reactions may produce flammable gases that can lead to gas/air...

  • Determination of the Critical Duration of the First Heating of Heavy Concrete by the Criterion of the Maximum Strength Reduction. Korsun, Volodymyr; Korsun, Artem; Mashtaler, Sergey // Applied Mechanics & Materials;2014, Vol. 740, p566 

    The article introduces the results of the experimental research of the duration of the first heating of concrete at temperatures of +90° and +150°C causing the maximum reduction of its strength during the subsequent axial compression.

  • Passive Solar Heating: its Role in Architectural Shaping. Murgul, Vera; Komatina, Dragan; Nikolić, Vojislav; Vatin, Nikolay // Applied Mechanics & Materials;2014, Vol. 740, p1552 

    A notion 'passive solar building design' has been arisen so far. In fact, it means heat flows management using architectural shaping. Architectural shaping is based on logic of heat flows generation and movement. Nowadays, an architectural form has no direct relation to a structure as close as...

  • APPLICATION WITH SIMULTANEOUS ELECTROCONTACT HEATING STRETCHING TO REDUCE RESIDUAL STRESSES IN THE HEAT EXCHANGE TUBE. SHIMOV, Georgy; SEREBRYAKOV, Andrey; SEREBRYAKOV, Alexander // Advanced Materials Research;2015, Vol. 1127, p121 

    The main reason of appearance and growth of corrosion damages of the nuclear steam generator heat exchanger tubes is the process of stress-corrosion cracking of metal under the influence of residual tensile stress. The article contain the suggestion of the method that combines the operation of...

  • The electrothermal heating tube membrane resistance test method research. XiLin Zhu; Gang Li // Key Engineering Materials;2016, Vol. 667, p413 

    This thesis uses a kind of detection method: The two ends of the measurement period from two electrodes, and the probe spacing can be adjusted. Two measuring end head into the interior with electric heat pipe membrane contact, used the voltage dividing circuit-relations indirect detection of...

  • Correlation of Heating Rates, Crystal Structures, and Microwave Dielectric Properties of LiZnTiO Ceramics. Lu, Xuepeng; Zheng, Yong; Huang, Qi; Xiong, Weihao // Journal of Electronic Materials;Nov2015, Vol. 44 Issue 11, p4243 

    The correlation of heating rates, crystal structures, and microwave dielectric properties of LiZnTiO ceramics was thoroughly investigated. Ionic polarizability, atomic packing fractions, bond strengths, and octahedral distortion of LiZnTiO ceramics were calculated on the basis of structure...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics