TITLE

Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions

AUTHOR(S)
Eker, Beril; Ekici, Bülent; Kurt, Mustafa; Bakır, Barkın
PUB. DATE
May 2014
SOURCE
Mechanika;2014, Vol. 20 Issue 3, p310
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this study, MQL turning performance was compared to dry conditions. The magnesium based material will be formed by applying the orthogonal cutting. The CNC Lathe shall be used for both cutting processes. The experiment used MINITAB 16 software to establish the experiment plan. In this study, workpiece was turned at cutting speeds of 230, 330 and 430 m/min, feed rates of 0.20, 0.35 and 0.50 mm/rev and cutting depth of 1, 2 and 3 mm. Taguchi experimental design method was used for determining the settings of turning parameters. Orthogonal arrays of Taguchi, the signal-to-noise (S/N) ratio, the analysis of variance (ANOVA) were carried out to determine the optimum levels and to analyze the influence of cutting speed, feed rate, cutting depth on surface roughness, temperature and cutting forces during dry and MQL turning.
ACCESSION #
96908973

 

Related Articles

  • Optimization of Surface Roughness in Wet Turning Operation of High Carbon High Chromium Steel. Davis, Rahul; Alazhari, Mohamed; Zubir, Abdurahman H. A. // International Review of Mechanical Engineering;Mar2013, Vol. 7 Issue 3, p495 

    In order to control the required surface quality, generally it is vital to have the choice of optimized cutting factors in various industrial machining operations. The trait of surface finish is a vital concern for most of the turned parts in an industry. The present research work is focused on...

  • OPTIMIZATION OF HARD TURNING PROCESS PARAMETERS WITH PCBN TOOL BASED ON THE TAGUCHI METHOD. Puh, Franko; Šegota, Toni; Jurković, Zoran // Tehnicki vjesnik / Technical Gazette;Apr-Jun2012, Vol. 19 Issue 2, p415 

    In this paper, the Taguchi method is applied to find optimum process parameters for hard turning of hardened steel AISI 4142 using PCBN tool. Orthogonal design (L9 (34)), signal-to-noise ratio (S/N) and analysis of variance (ANOVA) are applied to study performance characteristics of cutting...

  • Multi-response optimization of machining parameters in hot turning using grey analysis. Ranganathan, S.; Senthilvelan, T. // International Journal of Advanced Manufacturing Technology;Sep2011, Vol. 56 Issue 5-8, p455 

    This paper envisages the multi-response optimization of machining parameters in hot turning of stainless steel (type 316) based on Taguchi technique. The workpiece heated with liquid petroleum gas flame burned with oxygen was machined under different parameters, i.e., cutting speed, feed rate,...

  • TURNING PARAMETER OPTIMIZATION FOR SURFACE ROUGHNESS OF ASTM A242 TYPE-1 ALLOYS STEEL BY TAGUCHI METHOD. Verma, Jitendra; Agrawal, Pankaj; Bajpai, Lokesh // International Journal of Advances in Engineering & Technology;Mar2012, Vol. 3 Issue 1, p255 

    The purpose of this research paper is focused on the analysis of optimum cutting conditions to get lowest surface roughness in turning ASTM A242 Type-1 ALLOYS STEEL by Taguchi method. Experiment was designed using Taguchi method and 9 experiments were conducted by this process. The results are...

  • Comparison of Design of Experiments via Traditional and Taguchi Method. Islam, M. N.; Pramanik, A. // Journal of Advanced Manufacturing Systems;Sep2016, Vol. 15 Issue 3, p151 

    This paper presents a case study on comparison of Design of Experiments (DOE) via traditional and Taguchi methods in terms of efficiency. First, a three-level, four-parameter, full factorial DOE was conducted for finding the effects of machining parameters on the surface roughness (arithmetic...

  • Optimization of wire Electrical Discharge turning operations using robust design of experiment. Mohammadi, Aminollah; Fadaei Tehrani, Alireza; Safari, Mahdi // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p1205 

    In the present study a multi response optimization method using Taguchi's robust design approach is proposed for wire electrical discharge turning (WEDT) operations. Experimentation was planned as per Taguchi's L18 orthogonal array. Each experiment has been performed under different machining...

  • MULTI-RESPONSE OPTIMIZATION OF TURNING PARTS USING INTEGRATED TAGUCHI-GREY RELATIONAL ANALYSIS. SHARMA, NEERAJ; GARG, SANJEEV; SHARMA, PARDEEP // Journal on Mechanical Engineering;May-Jul2013, Vol. 3 Issue 3, p31 

    Multi-Response optimization of response variables having opposite nature is cumbersome to obtain without use of optimization techniques. In this research work, Grey relational analysis and Taguchi Design approach are used for multi response optimization of metal removal rate and surface...

  • Optimisation of machining and geometrical parameters in turning process using Taguchi method. Senthilkumar, N.; Ganapathy, T.; Tamizharasan, T. // Australian Journal of Mechanical Engineering;2014, Vol. 12 Issue 2, p233 

    One of the most important factors that adversely affect quality of turning process is flank-wear. The flank-wear influences surface roughness and dimensional accuracy of finished product. Both flank-wear and surface roughness depend upon machining parameters and geometry of cutting tool inserts....

  • Optimization of springback for AZ31 magnesium alloy sheets in the L-bending process based on the Taguchi method. Kuo, Chun-Chih; Lin, Bor-Tsuen // International Journal of Advanced Manufacturing Technology;Jan2012, Vol. 58 Issue 1-4, p161 

    Springback is a primary issue which is encountered during most sheet metal bending processes. Using the Taguchi method, this study investigates the springback of L-bending with a step in the die through simulation and experiments for AZ31 magnesium alloy sheets at different temperatures. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics