TITLE

Study on the element with the hole and crack

AUTHOR(S)
Xu, Qiang; Chen, Jian-yun; Li, Jing; Xu, Gang
PUB. DATE
July 2014
SOURCE
Acta Mechanica;Jul2014, Vol. 225 Issue 7, p1915
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A new element is proposed for describing a discontinuous medium, such as holes and cracks, inside the region of the element. The underlying idea is to construct numerically the base functions of the discontinuous region by capturing the results calculated by fine finite elements in small-scale and then to construct the element in macro-scale with the crack and hole based on the theories of the multi-scale finite element method and the extended finite element method. Some numerical analysis is performed. The results show that the proposed element can well describe the field of displacement, strain, and stress intensity of the discontinuous region inside the element and can significantly decrease the number of elements and nodes of the calculated porous structure. The precision of the proposed element is also acceptable.
ACCESSION #
96716237

 

Related Articles

  • Validity of J-Q-Tz Parameter for Three Dimensional Asymptotic Crack Tip Fields in Non-Hardening Materials. Leong, K. H.; Yusof, F. // AIP Conference Proceedings;2017, Vol. 1865 Issue 1, p1 

    This paper outlines a framework for evaluating the asymptotic crack tip field solution incorporating Tz parameter in three-dimensional crack problems. Assessment was done based on the comparisons with analytical solutions and results from three-dimensional crack-tip finite element analysis....

  • 425. Calculation of stresses in the coating of a vibrating beam. Ragulskis, M.; Kravčenkienė, V.; Pilkauskas, K.; Maskeliunas, R.; Zubavičius, L.; Paškevičius, P. // Journal of Vibroengineering;Mar2009, Vol. 11 Issue 1, p1 

    The model for the analysis of stresses in the coating of a straight beam performing transverse vibrations is presented. The developed numerical procedure is based on the technique of conjugate approximation with smoothing adapted for this specific problem. Relative error norms are calculated and...

  • Coupling Finite Element And Meshless Methods To Deal With Contact And Friction In Forging Processes. Guedes, Cristina Faria; César de Sá, José M. A. // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1507 

    In this work, a computational model based on a meshless method, the EFG method, was developed to simulate forging processes. The application of meshless methods in this type of forming processes opened new questions related to crucial aspects associated with the modelling of frictional effects...

  • A Finite Element Approach to Mechanical Degradation and Failure of Ductile Materials. Vaz Jr., M.; de Santi Jr., N.; de Souza Neto, E. A. // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1419 

    Prediction of ductile failure onset in fracture-free materials has instigated several research works in the last few years. The literature shows basically two general approaches: (i) post-processed fracture indicators and (ii) damage-based material modelling. The former has shown successful to...

  • Combining experimental and numerical analysis to estimate stress fields along the surface crack front. Chernyatin, A. S.; Matvienko, Yu. G.; Razumovsky, I. A. // Frattura e Integrita Strutturale;2013, Issue 25, p15 

    Combining experimental and computational method for determination of the singular and the nonsingular stress terms along the front of the 3D surface crack is proposed. Evaluation of the terms is based on comprehensive comparison between deformation responses (for measurement points on the...

  • Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding. van der Stelt, A. A.; Bor, T. C.; Geijselaers, H. J. M.; Quak, W.; Akkerman, R.; Huétink, J. // AIP Conference Proceedings;5/4/2011, Vol. 1353 Issue 1, p1290 

    In this paper, the material flow around the pin during friction stir welding (FSW) is simulated using a 2D plane strain model. A pin rotates without translation in a disc with elasto-viscoplastic material properties and the outer boundary of the disc is clamped. Two numerical methods are used to...

  • Numerical Simulations Of Moving Interfaces By Level Set Method In The Partition Of Unity Concept. Istrate, Mircea; Winkelmuller, Gérard // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1525 

    In this paper we present a hybrid eXtended Finite Element/Level Set Method to simulate a two dimensional moving interfaces. The discrete discontinuity (material interfaces) is treated by the extended finite element method (X-FEM), in the partition of unity concept, whereby interface...

  • Decoupled Simulation Method For Incremental Sheet Metal Forming. Sebastiani, G.; Brosius, A.; Tekkaya, A. E.; Homberg, W.; Kleiner, M. // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1501 

    Within the scope of this article a decoupling algorithm to reduce computing time in Finite Element Analyses of incremental forming processes will be investigated. Based on the given position of the small forming zone, the presented algorithm aims at separating a Finite Element Model in an...

  • An eXtended Arbitrary Lagrangian-Eulerian Finite Element Model (X-ALE-FEM) in Large Plasticity Deformations. Khoei, A. R.; Anahid, M.; Shahim, K. // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1495 

    In this paper, a new computational technique is presented based on the eXtended Arbitrary Lagrangian-Eulerian Finite Element Model (X-ALE-FEM) in large plasticity deformations. An arbitrary Lagrangian-Eulerian (ALE) technique is employed to capture the advantages of both Lagrangian and Eulerian...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics