TITLE

ANALYSIS OF HYBRID SLOT ANTENNA BASED ON SUBSTRATE PERMITTIVITY

AUTHOR(S)
Sadasivarao, B.; Madhav, B. T. P.
PUB. DATE
June 2014
SOURCE
Journal of Engineering & Applied Sciences;Jun2014, Vol. 9 Issue 6, p885
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Most of the microstrip patch antennas are constructed on thin substrates with low dielectric constant. The demand of millimeter wave and monolithic fabrication increased the interest of thick substrates with high dielectric constant. The efficiency of the antenna will decreases with increase in substrate permittivity but size of the antenna also decreases. When substrate permittivity is decreased, then performance can be improved. The thicker substrates will increase the bandwidth but if it exceeds some point then surface wave losses will be affected. Thinner substrates will not give bandwidth enhancement but surface wave losses can be decreased. There is tradeoff between substrate material selection and the performance of the antenna and the size. Without changing the substrate material, the size reduction can be achieved by employing slots in the model. The purpose of this paper is to provide a set of output parameters of hybrid slot antenna with change in substrate permittivity. The performance evaluation of hybrid slot antenna is carried out by changing the dielectric constant of the materials by maintaining the constant thickness of 1.6mm.
ACCESSION #
96709039

 

Related Articles

  • Study of a parasitic U‐slot patch array antenna with characteristic mode analysis. Yeung, Sai Ho; Wang, Chao‐Fu // Microwave & Optical Technology Letters;Feb2018, Vol. 60 Issue 2, p482 

    Abstract: This letter presents and analyses a novel parasitic U‐slot patch array antenna, designed by combining the characteristic of U‐slot patch antenna and the characteristic of parasitically coupled antenna elements. Characteristic mode analysis is performed on the novel antenna...

  • Wide bandwidth, high-gain slot-loaded rectangular microstrip antennas. Maddani, G. P.; Sameena, N. M.; Mulgi, S. N. // Microwave & Optical Technology Letters;Dec2010, Vol. 52 Issue 12, p2841 

    The effect of slot on patch and on ground plane of rectangular microstrip antenna for effective size reduction, wide bandwidth, and high gain has been presented. A 60.57% of virtual size reduction is achieved by taking ground plane same as that of patch on another similar substrate and by...

  • Modified ground plane of patch antenna for broadband applications in C-band. Jyoti Gogoi, Pragyan; Jyoti Gogoi, Dhruba; Bhattacharyya, Nidhi S. // Microwave & Optical Technology Letters;May2016, Vol. 58 Issue 5, p1074 

    ABSTRACT Slots are incorporated in ground plane of a simple rectangular patch antenna designed in C-band on FR-4 substrate with dielectric constant εr = 4.3 and height, h = 1.5 mm. The presence of slots shows multi frequency characteristics with enhanced bandwidth and directivity as compared...

  • ANALYSIS OF HYBRID SLOT ANTENNA BASED ON SUBSTRATE PERMITTIVITY. Sadasivarao, B.; Madhav, B. T. P. // Journal of Agricultural & Biological Science;Jun2014, Vol. 9 Issue 6, p885 

    Most of the microstrip patch antennas are constructed on thin substrates with low dielectric constant. The demand of millimeter wave and monolithic fabrication increased the interest of thick substrates with high dielectric constant. The efficiency of the antenna will decreases with increase in...

  • CPW-fed step-shaped microstrip antenna for UWB applications. Jose, Sharon M.; Lethakumary, B // Microwave & Optical Technology Letters;Mar2015, Vol. 57 Issue 3, p589 

    ABSTRACT A compact and simple CPW-fed step-shaped microstrip antenna for ultrawideband applications is presented. The antenna offers a wide bandwidth from 4.4 to 11 GHz with an impedance bandwidth of 85.7%. The antenna also offers an average gain of 4.65 dBi in the entire band with good...

  • Millimetre-wave slotted array antenna based on double-layer substrate integrated waveguide. Teng Li; Wen Bin Dou // IET Microwaves, Antennas & Propagation;2015, Vol. 9 Issue 9, p882 

    In this study, a millimetre-wave slotted array antenna based on double-layer substrate integrated waveguide (SIW) is proposed. The radiating array and feeding network are arranged on different substrate layers with a normal printed circuit board process. The design procedure of radiating...

  • Circularly polarised MIMO tapered slot antenna array for C-band application. Karamzadeh, S.; Kartal, M. // Electronics Letters;9/3/2015, Vol. 51 Issue 18, p1394 

    A novel configuration of a multiple-input multiple-output (MIMO) circularly polarised (CP) antenna array operating in the C-band is presented. The array consists of 2 × 2 antipodal tapered slot antenna elements created in the sides of a rectangular as the rectangular grid that supplies a...

  • Comparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes. Dashti, H.; Neshati, M. H. // International Journal of Engineering (1025-2495);Oct2014, Vol. 27 Issue 10, p1573 

    A set of hybrid microstrip patch and semi-circular cavity antennas is introduced. The semi-circular cavity is implemented using Half-mode Substrate Integrated Waveguide (HMSIW) technique. Different shapes of the patch including rectangular, semi-circular and equilateral triangular are excited...

  • Variations of P-shape microstrip antennas for multi-band dual polarised response. Deshmukh, Amit A.; Verma, Priyanka; Pawar, Shefali // IET Microwaves, Antennas & Propagation;2019, Vol. 13 Issue 3, p398 

    A novel design of a P-shape microstrip antenna is proposed. The stub in the P-shape patch modifies the frequency and resonant mode distributions at second-order TM20 mode which along with TM10 and TM01 modes yields dual-polarised triple-frequency response, showing 1−1.5% of impedance...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics