TITLE

Influences of Polypropylene Fiber in Modulus of Elasticity, Modulus of Rupture and Compressive Strength of Concrete

AUTHOR(S)
Anbuvelan, K.; Subramanian, K.
PUB. DATE
May 2014
SOURCE
Australian Journal of Basic & Applied Sciences;May2014, Vol. 8 Issue 7, p225
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents the relationship between modulus of elasticity and, modulus of rupture relationship with compressive strength of M60 concrete incorporating Polypropylene fiber. Comparing the experimentally obtained results with the mechanical properties calculated using the recommend relationship from the various design codes, one finds substantial variation in the data. A new empirical relationship between elastic modulus, modulus of rupture and compressive strength of Polypropylene fiber based M60 concrete is proposed.
ACCESSION #
96583871

 

Related Articles

  • Thermo-mechanical properties of LaNiO. Huang, B. X.; Malzbender, J.; Steinbrech, R. W. // Journal of Materials Science;Jul2011, Vol. 46 Issue 14, p4937 

    Elastic and fracture behavior of LaNiO have been assessed. Fracture stress and elastic modulus of porous LaNiO were evaluated from room temperature (RT) up to 900 °C on the basis of 4-point bending tests. Both parameters increase slightly from RT to 700 °C. However, at higher temperatures...

  • Model of a thermo-elastic-inelastic process with large deformations and structural changes in material. Rogovoi, A. // Journal of Applied Mechanics & Technical Physics;Sep2015, Vol. 56 Issue 5, p901 

    The dependence of a scalar measure of the structural changes occurring in a material under plastic deformation on a plastic strain measure and the dependence of a free energy measure on a structural change measure are constructed using experimental data that allow the expended plastic work to be...

  • A Comparative Study on Mechanical Properties of Fibre based Concrete using Synthetic Fibres. Patel, Priti A.; Desai, Atul K.; Desai, Jatin A. // International Journal of Applied Engineering Research;2011, Vol. 6 Issue 17, p1905 

    Fibres influence the mechanical properties of concrete and mortar in all failure modes especially those that induce fatigue and tensile stress, e.g., direct tension, bending, impact, and shear. The primary objectives of this investigation were to determine the benefits of fibre base concrete by...

  • The application of 2-dimensional elasticity for the elastic analysis of solid sphere made of exponential functionally graded material. Nejad, Mohammad Zamani; Abedi, Majid; Lotfian, Mohammad Hassan; Ghannad, Mehdi // Mechanika;2014, Vol. 20 Issue 3, p254 

    The objective of this study is to present an analytical and a numerical solution for stresses and radial displacement in pressurized solid sphere using plane elasticity theory (PET). The solid sphere composed of functionally graded material (FGM). Poisson's ratio is assumed constant and modulus...

  • Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method. Moulart, R.; Pierron, F.; Hallett, S. R.; Wisnom, M. R. // Experimental Mechanics;Apr2011, Vol. 51 Issue 4, p509 

    The present paper deals with full-field strain measurement on glass/epoxy composite tensile specimens submitted to high strain rate loading through a split Hopkinson pressure bar (SHPB) device and with the identification of their mechanical properties. First, the adopted methodology is...

  • Mechanical properties of non-cohesive polygonal particle aggregates. Roul, Pradip; Schinner, Alexander; Kassner, Klaus // Granular Matter;Aug2011, Vol. 13 Issue 4, p303 

    We numerically investigate the effective material properties of aggregates consisting of soft convex polygonal particles, using the discrete element method. First, we construct two types of 'sand piles' by two different procedures. Then we measure the averaged stress and strain, the latter via...

  • Effect of a pulsed electromagnetic field on stress relaxation in concentrator-containing flat specimens. Stepanov, G.; Gromov, V.; Olisov, A.; Fedorchuk, V.; Babutskii, A. // Strength of Materials;Jan2012, Vol. 44 Issue 1, p27 

    Experimental results of evaluating the pulsed electromagnetic field effect on tensile stress relaxation in specimens with hole a concentrator are presented. The pulsed electromagnetic field is shown to induce local inelastic strain of a metal in the vicinity of the concentrator, which is greatly...

  • On the Elastic Compliance of a Circular Hole with Two Symmetric Radial Cracks Initiated at its Boundary. Picazo, Mario; Sevostianov, Igor // International Journal of Fracture;Feb2011, Vol. 167 Issue 2, p273 

    circular hole with two symmetric rectilinear radial cracks initiated at its boundary is analyzed from the point of view of its elastic compliance (contribution to the overall elastic properties of a representative volume). Results are obtained using Rice's connection between stress intensity...

  • A note on the Mooney-Rivlin material model. Liu, I-Shih // Continuum Mechanics & Thermodynamics;Nov2012, Vol. 24 Issue 4-6, p583 

    In finite elasticity, the Mooney-Rivlin material model for the Cauchy stress tensor T in terms of the left Cauchy-Green strain tensor B is given by where p is the pressure and s, s are two material constants. It is usually assumed that s > 0 and s ≤ 0, known as E-inequalities, based on the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics