TITLE

Space vector pulse-width modulation scheme for multilevel voltage inverters with duty cycle calculation based on relative vector distances

AUTHOR(S)
Ovalle, Andres; Ramos, Gustavo
PUB. DATE
April 2014
SOURCE
IET Power Electronics;Apr2014, Vol. 7 Issue 4, p829
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this study, a control scheme for multilevel inverters is formulated employing space vector pulse-width modulation. The notable formulation bases the duty cycle calculation on relative distances among constructive vectors provided by the lineneutral voltage levels of the converter topology. Furthermore, in order to locate the control vector (or reference vector) properly, Clarke transformation of instantaneous line-neutral voltages is employed. In this way, calculations of duty cycles are simplified, closed- and open-loop operations have similar approaches and linear and over modulation operations are performed with minimal variations. Also, this approach eliminates the use of trigonometric functions in order to reduce memory demands and computational capacity. The scheme is tested on a 7seven-level inverter with cascaded H-bridge topology using real-time simulation.
ACCESSION #
95909578

 

Related Articles

  • Vector-optimised harmonic elimination for single-phase pulse-width modulation inverters/converters. Hadji, S.; Touhami, O.; Goodman, C.J. // IET Electric Power Applications;May2007, Vol. 1 Issue 3, p423 

    A new approach for calculating single-phase inverters/converters-optimised pulse-width modulation (PWM) switching angles for harmonic and voltage control is proposed. This approach takes into account the DC-link voltage ripple, due to the finite DC-link capacitance, in the optimised...

  • Cascaded three-phase pulse-width modulated switched voltage source inverter. Odeh, Charles I.; Agu, Vincent N.; Goshwe, Nentawe // IET Power Electronics;Jul2014, Vol. 7 Issue 7, p1925 

    A cascaded three-phase pulse-width modulated (PWM) switched voltage source inverter topology is proposed. Each of the two cascaded units in a phase-leg is an H-bridge, whose switch legs are separated by a switched capacitor and a diode. Three upper H-bridges in this inverter configuration have...

  • A Modulation Strategy for DC/AC Converter Based on Voltage Limitation Criterion. Xiao Xi; Kang Qing; Zheng Zedong; Zhu Ziqiang // International Review of Electrical Engineering;Sep/Oct2012, Vol. 7 Issue 5, p5365 

    In this paper, a pulse-width modulation (PWM) method based on the voltage limitation criterion (VLCPWM) is presented. This method analyzes the desired values of phase voltages and the output voltage limitation of voltage source inverter (VSI), and the PWM duty cycles are then obtained directly....

  • Single-phase multilevel inverter based on switched-capacitor structure. Bac-Bien Ngo; Minh-Khai Nguyen; Jae-Hong Kim; Firuz Zare // IET Power Electronics;2018, Vol. 11 Issue 11, p1 

    This study proposes a new topology for multilevel inverters based on switched-capacitor structure. The proposed topology uses capacitor charged/discharged characteristic to boost the output voltage without employing magnetic elements. The proposed circuit configuration has fewer components,...

  • Theoretical harmonic analysis of cascaded H-bridge inverter under hybrid pulse width multilevel modulation. Jiaomin Liu; Yuwei Sun; Yonggang Li; Chao Fu // IET Power Electronics;2016, Vol. 9 Issue 14, p2714 

    This study investigates the analytical approach for determining the spectral components of a hybrid pulse width modulation (HPWM) strategy for cascaded H-bridge (CHB) multilevel inverters. By decomposing the HPWM voltage into a staircase waveform and a non-sinusoidal pulse width modulation...

  • Dynamic voltage restorer based on multilevel inverter with adjustable dc-link voltage. Babaei, Ebrahim; Kangarlu, Mohammad Farhadi; Sabahi, Mehran // IET Power Electronics;Mar2014, Vol. 7 Issue 3, p576 

    Dynamic voltage restorer (DVR) is a power electronic converter-based custom power device used to compensate for voltage variations. The inverter used in the DVR structure can have different topologies. Multilevel inverters are a good candidate to be used in the DVR structure especially in higher...

  • Selective harmonic mitigation-pulse-width modulation technique with variable DC-link voltages in single and three-phase cascaded H-bridge inverters. Moeini, Amirhossein; Iman-Eini, Hossein; Bakhshizadeh, Mohamadkazem // IET Power Electronics;Apr2014, Vol. 7 Issue 4, p924 

    There are different modulation techniques that can be used in medium-voltage and high-power electronic converters, but a few of them provide high efficiency and satisfy power quality requirements. This study presents a modified selective harmonic mitigation pulse-width modulation (SHM-PWM)...

  • Simulation Development of Carrier based Pulse Width Modulation for Cascaded Multilevel Inverter. Sujanarko, Bambang // International Journal of Computer Applications;Oct2014, Vol. 104 Issue 1-17, p36 

    Cascaded multilevel inverter (CMLI) is emerging as a new breed of power converter options for high-power applications. Various topologies and modulation strategies of this inverter has been proposed. In this paper, Matlab simulink of CMLI using Carrier Based Pulse Width Modulation (CBPWM)...

  • Optimised full-bridge transformerless photovoltaic grid-connected inverter with low conduction loss and low leakage current. Huafeng Xiao; Xipu Liu; Ke Lan // IET Power Electronics;Apr2014, Vol. 7 Issue 4, p1008 

    The unipolar sinusoidal pulse width modulation (SPWM) full-bridge inverter brings high-frequency common-mode voltage, which restricts its application in transformerless photovoltaic grid-connected inverter. The freewheeling path added in ac side is adopted to restrict leakage current, but the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics