TITLE

High tunability in compositionally graded epitaxial barium strontium titanate thin films by pulsed-laser deposition

AUTHOR(S)
Lu, S. G.; Zhu, X. H.; Mak, C. L.; Wong, K. H.; Chan, H. L. W.; Choy, C. L.
PUB. DATE
April 2003
SOURCE
Applied Physics Letters;4/28/2003, Vol. 82 Issue 17, p2877
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Compositionally graded barium strontium titanate [(Ba[SUBx]Sr[SUB1-x])TiO[SUB3]) -- BST, x = 0.75, 0.8, 0.9, and 1.0] thin films are fabricated by pulsed-laser deposition on a LaAlO[SUB3] substrate with (La[SUB0.7]Sr[SUB0.3])MnO[SUB3] as the bottom electrode. A high dielectric permittivity and temperature characteristic without Curie-Weiss law are obtained. A tunability of over 70% is obtained at frequency of 1 MHz, which is higher than that of single BST layer with the same compositions. All the results indicate that the graded thin films have better electrical properties than a single-layer film.
ACCESSION #
9555485

 

Related Articles

  • Structural and microwave properties of (Ba,Sr)TiO[sub 3] films grown by pulsed laser deposition. Kim, W.J.; Chang, W.; Qadri, S.B.; Pond, J.M.; Kirchoefer, S.W.; Horwitz, J.S.; Chrisey, D.B. // Applied Physics A: Materials Science & Processing;2000, Vol. 70 Issue 3, p313 

    The relationship between the structure and the microwave dielectric properties of epitaxial Ba[sub 0.5] Sr[sub 0.5] TiO[sub 3] (BST) films has been investigated. Single-phase BST films (40-160 nm) have been deposited onto (100) MgO substrates by pulsed laser deposition. As-deposited films...

  • Effects of ambient gas pressure on (1-x) SrTiO3-xBaTiO3 films prepared by pulsed laser deposition. Tseng, Tzu-Feng; Yeh, Ming-Hua; Liu, Kuo-Shung; Lin, I-Nan // Journal of Applied Physics;11/1/1996, Vol. 80 Issue 9, p4984 

    Deals with a study which assessed the effect of ambient gas pressure in pulsed laser deposition on the lattice parameters of strontium barium titanate thin films. Experimental details; Results; Discussion; Conclusion.

  • The effect of annealing on the microwave properties of Ba[sub 0.5]Sr[0.5]TiO[sub 3] thin films. Chang, Wontae; Horwitz, James S.; Carter, Adriaan C.; Pond, Jeffrey M.; Kirchoefer, Steven W.; Gilmore, Charles M.; Chrisey, Douglas B. // Applied Physics Letters;2/15/1999, Vol. 74 Issue 7, p1033 

    Examines the effect of annealing on the microwave properties of Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3] (BST) thin films using pulsed laser deposition. Observed dielectric properties of the BST films attributed to changes in film stress which affect the extent of ionic polarization; Capacitance and...

  • Enhanced electrical properties of Ba[sub 0.5]Sr[0.5]TiO[sub 3] thin films grown... Srivastava, Anuranjan; Craciun, Valentin; Howard, Joshua M.; Singh, Rajiv K. // Applied Physics Letters;11/8/1999, Vol. 75 Issue 19, p3002 

    Reports on the enhanced electrical properties of barium strontium titanate thin films grown by ultraviolet-assisted pulsed laser deposition. Improved structural and electrical properties exhibited by the films compared with films grown using other techniques; Density of interface states at the...

  • Structural and optical properties of laser deposited ferroelectric (Sr0.2Ba0.8)TiO3 thin films. Cheng, Hsiu-Fung // Journal of Applied Physics;5/15/1996, Vol. 79 Issue 10, p7965 

    Presents information on a study which examined the structural and optical properties of laser deposited ferroelectric strontium[sub0.2] barium[sub0.8] titanium oxygen[sub3] thin films. Experimental procedure; Results and discussion; Conclusion.

  • Layer-by-layer and pseudo-two-dimensional growth modes for heteroepitaxial BaTiO3 films by exploiting kinetic limitations. Shin, Junsoo; Kalinin, S. V.; Borisevich, A. Y.; Plummer, E. W.; Baddorf, A. P. // Applied Physics Letters;11/12/2007, Vol. 91 Issue 20, p202901 

    Pulsed laser deposition has enabled formation of highly oxidized and strained BaTiO3 films on SrTiO3 substrates in a layer-by-layer growth mode to thicknesses of 125 nm. Balancing thermodynamics and diffusion lengths enables controlled growth at the higher oxygen pressures required. Growth above...

  • Pulsed laser deposition of oriented barium ferrite (BaFe[sub 12]O[sub 19]) thin films. Liu, X.H.; Hong, M.H.; Song, W.D.; Chen, G. X.; Chong, J. F.; Wang, J. P.; Wu, Y. H.; Chong, T.C. // Applied Physics A: Materials Science & Processing;2004, Vol. 78 Issue 3, p423 

    Barium ferrite (BaFe[sub 12]O[sub 19]) thin films have been deposited by pulsed laser deposition at 900 °C in 250 mTorr oxygen on Si substrates with Pt (111) underlayers. The barium ferrite films contained platelet grains and a small amount of acicular grains, with sizes of 300 nm and...

  • Magnetoelectric behavior of BaTiO3 films directly grown on CoFe2O4 ceramics. Wang, Jing; Zhang, Yi; Ma, Jing; Lin, Yuanhua; Nan, C. W. // Journal of Applied Physics;Jul2008, Vol. 104 Issue 1, p014101 

    BaTiO3 films were grown on highly dense CoFe2O4 ceramics via pulsed laser deposition. Microstructural characterization showed that polycrystalline BaTiO3 thin films with grain size of about 70 nm were grown on the CoFe2O4 ceramics. BaTiO3 films showed good ferroelectric feature. An obvious...

  • Fabrication and photosensitivity of AgInSe[sub 2]/III�VI isotypic heterojunctions. Rud�, V. Yu.; Gremenok, V. F.; Rud�, Yu. V.; Bekimbetov, R. N.; Bodnar�, I. V. // Semiconductors;Oct99, Vol. 33 Issue 10, p1097 

    AgInSe[sub 2] thin films on glass substrates have been prepared by pulsed laser deposition. Rectifying heterojunctions with a pronounced photovoltaic effect have been fabricated for the first time by placing such films in optical contact with layered III-VI (InSe, GaSe) semiconductors. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics