TITLE

Controlling Pretreatment Costs and Quality

AUTHOR(S)
KENT, GARY; TALBERT, RODGER
PUB. DATE
April 2003
SOURCE
Industrial Paint & Powder;Apr2003, Vol. 79 Issue 4, p23
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Focuses on several methods to reduce costs and improve the quality of pretreatment of coatings process. Features of the bioremediation process; Steps involved in dried-in-place process; Overview of high-performance pretreatment systems.
ACCESSION #
9542604

 

Related Articles

  • Saving Capital on In-House Coating.  // Industrial Paint & Powder;Apr2003, Vol. 79 Issue 4, p16 

    Focuses on various steps involved in cost effective in-house coating process. Consideration for the cost, talent and requirements of operating a coating system; Alternatives for traditional coatings method; Objectives of manufacturer's coating operation.

  • Insert Coating Makes the Grade in Progress Initiative.  // Modern Machine Shop;Jul2010, Vol. 83 Issue 2, p96 

    The article offers information on the duratomic coating process developed by Seco Tools Inc. It mentions that duratomic coating process improves the toughness and wear resistance of the product. Duratomic coating process also helps in reducing cycle times, tooling cost up to 70 percent and cuts...

  • Paints, Coatings, and Supplies.  // National Construction Estimator;2010, Issue 58, p235 

    The article offers information on the most cost-effective method of a quality coatings. It states that costs that are for good to better quality coatings can be purchased in one to four gallon quantities. It adds that general contractor prices for such coatings may be discounted 10% to 15% on...

  • A Review of Strengthening Technique of RC Beams Using Non-Prestressed External Reinforcing Bars. Vasudevan, G.; Kothandaraman, S. // IUP Journal of Structural Engineering;Apr2013, Vol. 6 Issue 2, p7 

    The paper gives an overview of the use of non-prestressed external reinforcing bars for flexural strengthening of RC beams. Methods such as FRP wrapping, post-tensioning technique, jacketing and bonded steel plating are widely used for flexural retrofitting. High cost, difficulty in execution,...

  • TESTING AND EVALUATING THE STABILITY OF COATING SYSTEMS OF THE INTERIOR SHELLS IN COOLING TOWERS. BABOR, DĂNUŢ T.; COVATARIU, DANIEL; HEINE, PEER // Bulletin of the Polytechnic Institute of Iasi - Construction & A;2012, Vol. 62 Issue 3, p101 

    Natural draught cooling towers are exceptional structures in every respect. Due to the enormous surface in connection with the diverse range of impacts from surrounding environment and operation, interior shells of cooling towers require particular protection. This is achieved by applying...

  • THE SPRAY GUN ALTERNATIVE. RICE, BILL // Auto Body Repair Network;Aug2014, Vol. 53 Issue 8, p52 

    The article focuses on the use hand-applied clear coatings in restoring paint's original color. Topics discussed include the preparations required and the difficulties hand-applied clear coatings, the need to practice the process on a scrap surface before application, and the environmental...

  • Coating of electrically conductive textile structures. Oettel, Jens; Neudeck, Andreas; Möhring, Uwe // Melliand International;Mar2010, Vol. 16 Issue 1/2, p42 

    Within this project, different conductive structures were coated according to their specific requirements. Especially the dispenser technology assures the demanded parameters. The use of little amounts of coating pastes achieves optimal protective features. The first-time usage of powder coating...

  • A simple and cost-effective method for fabricating lotus-effect composite coatings. Su, Changhong // Journal of Coatings Technology & Research;Mar2012, Vol. 9 Issue 2, p135 

    This paper reports the fabrication of a lotus-effect coating by grafting epoxy (EP) resin on the surface of microsilica and nanosilica, respectively, and subsequent spraying. The coating shows the same structure and capability as lotus leaves, and shows a static contact angle as large as 165°...

  • An holistic analysis of the paintshop of tomorrow. Smith, Simon Duval // Automotive Manufacturing Solutions;May/Jun2013 APS Supplement, p34 

    The article reports on an ecological-efficiency analysis performed by BASF and Dürr, which used a holistic perspective to examine the paint line and coating technology. The analysis compared the efficiency of products and processes and their impact on the environment. It looks at...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics