TITLE

Research on Load-bearing Performance of I-shaped Column under Cyclic Compression

AUTHOR(S)
Xiaojing Chen; Ping Yang; Huwei Cui
PUB. DATE
April 2014
SOURCE
Advanced Materials Research;2014, Issue 904, p460
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents a theoretical method to analyze the load bearing capability under cyclic axial compression load. The relationship between axial force and vertical deflection of I-shaped column is obtained by theoretical analysis and derivation. To verify the method and formulas of the paper, an illustrative example column is analyzed by the presented theoretical method and FEM to discuss the deflection performance and load bearing capability. The comparison of the results indicates perfect match between theoretical and numerical ones. It is shown that the theoretical analysis is feasible and reasonable.
ACCESSION #
95050849

 

Related Articles

  • An Analytical Approach to Vibration Analysis of Beams with Variable Properties. Mohammadnejad, M.; Saffari, H.; Bagheripour, M. // Arabian Journal for Science & Engineering (Springer Science & Bu;Apr2014, Vol. 39 Issue 4, p2561 

    In this paper, an approach is proposed for determination of vibration frequencies of variable cross-section Timoshenko beams and of non-prismatic Euler beams under variable axial loads. In each case, the governing differential equation is first obtained and, according to a harmonic vibration, is...

  • Effect of Nano-Circular Inclusion on the Interfacial Stresses of a Nano-Composite. Ahmed, W. Kh.; Omar, F. Kh.; Haik, Y. // AIP Conference Proceedings;8/22/2007, Vol. 929 Issue 1, p38 

    The aim of this paper is to investigate numerically, through a finite element method, the influence of a Nano-Circular Inclusion on the interfacial stresses around a Nano-Fiber composite subjected to axial load to explain some of the causes that affect the failures of Nano-Composites. Previous...

  • Application of the Beremin Model for Cruciform Specimen to Determine the Fracture Probability in Case of WPS. Beleznai, R.; Szavai, Sz. // Strength of Materials;Jul2013, Vol. 45 Issue 4, p489 

    Based on large-scale experimental tests performed on cruciform specimens made of French type RPV steel, the warm prestressing (WPS) effect for LCF (load-cool-fracture) and LCTF (load-cool-transient-fracture) load cycles is studied by finite element simulation. The modified Beremin model is used...

  • Finite Element Analysis on Hysteretic Behavior of Aluminium Columns under Cyclic Loading. Zheng Zhang; Yongqian Zheng; Xuechao Chen; Zhibin Wang // Advanced Materials Research;2014, Vol. 1049-1050, p264 

    The mechanical properties of axial compression aluminium members under cyclic loading were studied and compared with those of steel columns. In order to proceed to theoretical study on hysteretic behavior of aluminium columns, a method by finite element analysis was proposed. The method was...

  • A finite-element analysis of the connecting bolts of slewing bearings based on the orthogonal method. Qiu, Ming; Yan, Jiafei; Zhao, Binhai; Chen, Long; Bai, Yaoxing // Journal of Mechanical Science & Technology;Mar2012, Vol. 26 Issue 3, p883 

    This paper presents an analysis of the main factors affecting the performance of connecting bolts for slewing bearings. For double row four-point contact ball bearings, major factors include the preload, friction coefficient and height of the bushes. First, bolt connection performances with...

  • Unbalance Responses of Rotor/Stator Systems with Nonlinear Bearings by the Time Finite Element Method. Demailly, D.; Thouverez, F.; Jézéquel, L. // International Journal of Rotating Machinery;May2004, Vol. 10 Issue 3, p155 

    Since the early 1970s, major works in rotordynamics were oriented toward the calculation of critical speeds and unbalance responses. The current trend is to take into account many kinds of non-linearities in order to obtain more realistic predictions. The use of algorithms based on nonlinear...

  • Design bearings that don't seize. Khonsari, M. M.; Booser, E. R.; Kren, Lawrence // Machine Design;1/8/2004, Vol. 76 Issue 1, p82 

    Discusses the problem of thermally induced seizure (TIS) on bearings. Frictional heat generated by unlubricated bearings; Finite element model of bearing undergoing TIS; Application of the empirical relations from finite element models in designing bearings that take longer to seize when...

  • A Minimal Model to Explore the Influence of Distant Modes on Mode-Coupling Instabilities. Kruse, Sebastian; Hoffmann, Norbert // AIP Conference Proceedings;9/30/2010, Vol. 1281 Issue 1, p1411 

    The phenomenon of mode-coupling instability is one of the most frequently explored mechanisms to explain self-excited oscillation in sliding systems with friction. A mode coupling instability is usually due to the coupling of two modes. However, further modes can have an important influence on...

  • Finite element analysis of concrete-filled rectangular tubular frame. Li XiLe; Niu Lihua // Applied Mechanics & Materials;2014, Issue 578-579, p695 

    Based on the model experiment on seismic behavior of a 1-span, 2-story concrete-filled rectangular steel tubal(CFRST)frame under lateral cyclic loads, a 3-D nonlinear finite element model of concrete-filled rectangular steel tubular frame is proposed in the paper. Compared with the experimental...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics