TITLE

Design considerations bring unity to a mixed-voltage world

AUTHOR(S)
Cuy, Kenneth M.
PUB. DATE
February 1995
SOURCE
EDN;2/2/95, Vol. 40 Issue 3, p115
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Discusses the design considerations in the mixed-voltage industry. Compatibility of 3V with 5V devices; Benefits of lower voltages; Trade-offs in space and speed; Interfacing 5 and 3V devices.
ACCESSION #
9503031780

 

Related Articles

  • High-performance quantum cascade lasers (λ∼11 μm) operating at high temperature (T >=425 K). Tahraoui, A.; Matlis, A.; Slivken, S.; Diaz, J.; Razeghi, M. // Applied Physics Letters;1/22/2001, Vol. 78 Issue 4, p416 

    We report record-low threshold current density and high output power for λ∼11 μm Al[sub 0.48]In[sub 0.52]As/Ga[sub 0.47]In[sub 0.53]As quantum cascade lasers operating up to 425 K. The threshold current density is 1.1, 3.83, and 7.08 kA/cm[sup 2] at 80, 300, and 425 K, respectively,...

  • Design Considerations For Refrigeration/Cooling Facilities. HEINE, TODD // Food Logistics;Aug2015, Issue 169, p16 

    The article offers the author's insights on the design for refrigeration and cooling facilities. Topics discussed by the author include consideration of space where service facility to be constructed, consideration of factors such as storage needs and growth projection, and consideration of...

  • CONTRIBUTION OF LIVE WORKING TO THE QUALITY, SAFETY, EFECTIVENESS AND EFFICIENCY OF THE MAINTENANCE PROCESSES. Lovrenčić, Viktor; Brezavšček, Alenka; Pantoš, Miloš; Gomišćek, Boštjan // Tehnicki vjesnik / Technical Gazette;Sep/Oct2017, Vol. 24 Issue 5, p1619 

    In spite of the fact that live working has been carried out in the world for over a hundred years, it has been used in Slovenia as a tool of preventive maintenance of electrical installations only for the last few years. Live working is a novelty for the Slovene electricity environment, so it...

  • Effect of structural thickness, anchor length and number of anchors on performance of micromechanical bulk-mode resonators. Khine, L.; Palaniapan, M. // Electronics Letters;1/1/2009, Vol. 45 Issue 1, p37 

    The performance of micromechanical Lamé-mode square resonator designs with different geometric parameter variations in structural layer thickness, length of anchor beams and the number of anchors placed at nodal points, is reported. Measured results reveal that there is an optimal range of...

  • Experimental Design and Statistical Analysis in Rotating Disc Contactor (RDC) Column. Ismail, Wan Nurul Aiffah; Zakaria, Siti Aisyah; Noor, Nor Fashihah Mohd; Ariffm, Wan Nor Munirah // AIP Conference Proceedings;2015, Vol. 1691, p1 

    The purpose of this paper is to examine the performance of the liquid-liquid extraction in Rotating Disc Contactor (RDC) Column that being used in industries. In this study, the performance of small diameter column RDC using the chemical system involving cumene/isobutryric asid/water are...

  • A Comparative Study of Flat Coil and Coil Sensor for Landslide Detection. Sanjaya, Edi; Muslimin, Ahmad Novi; Djamal, Mitra; Suprijadi; Handayani, Gunawan; Ramli // AIP Conference Proceedings;2016, Vol. 1719 Issue 1, p1 

    The landslide is one of the most costly catastrophic events in terms of human lives and infrastructure damage, thus an early warning monitoring for landslides becomes more and more important. Currently existing monitoring systems for early warning are available in terms of monolithic systems....

  • CPW-fed circularly polarized antenna for 3.5 GHz WiMAX band. Chang, Nan // Microwave & Optical Technology Letters;Mar2009, Vol. 51 Issue 3, p849 

    This article presents a new configuration of the common part of two unusually coupled open loops fed by a coplanar waveguide (CPW). For each open loop, the common part is in cooperation with one extended ground line of the CPW. The two loops are coupled to yield a wideband circularly polarized...

  • Time-harmonic finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor. Jahirul Islam, M.; Pippuri, J.; Perho, J.; Arkkio, A. // IET Electric Power Applications;Sep2007, Vol. 1 Issue 5, p839 

    A finite-element model for calculation of eddy-current and circulating current losses in a multi-conductor stator winding of a cage induction motor is presented. In this model, the eddy current formulation of the series and parallel connected stator bars is solved together with the circuit and...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics