TITLE

USO POTENCIAL DE RECUBRIMIENTOS HÍBRIDOS SOL-GEL COMO ALTERNATIVA PARA LA PROTECCIÓN CONTRA LA CORROSIÓN DE ALEACIONES LIGERAS

AUTHOR(S)
Hernández-Barrios, Carlos A.; Remolina, Érika N.; Contreras, Geraldine A.; Parada, Nayla J.; Coy, Ana E.; Viejo, Fernando
PUB. DATE
July 2014
SOURCE
La Revista Latinoamericana de Metalurgia y Materiales, RLMM;2014, Vol. 34 Issue 2, p251
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The aim of this work was to show the preliminary results related to the synthesis of hybrid sol-gel coatings for corrosion protection of the commercial AZ31 and AZ91D magnesium alloys, and the AA2124-T4 and AA2050-T8 aluminium alloys. For this purpose, hybrid sols were prepared from a mixture of the inorganic precursor tetraethylorthosilicate (TEOS) and the organics precursors glycidoxypropyltriethoxysilane (GPTMS) and 3-aminopropyltriethoxysilane (APTES). Two experimental variables were fixed: the molar ratio APTES:GPTMS (from 0,15:1 to 0,25:1) and the aging time (from 10 to 60 minutes). Later, sol-gel coatings were obtained by deposition of these sols following the dip-coating route. Coatings were characterized using Scanning Electron Microscopy (SEM) while Fourier Transform Infrared (FTIR) Spectroscopy and rheological tests were used to analyze the sol properties. On the other hand, corrosion resistance was evaluated by potentiodynamic anodic polarization test in aerated 0.1 M NaCl solution. The experimental results showed that, under some specific experimental conditions, it was possible to obtain homogeneous and uniform coatings with excellent corrosion resistance with regard to the parent alloy. The precursor APTES was confirmed as a key variable during the gelation process. Its properties substantially modified the sol viscosity, affecting the morphological features and the corrosion protection of the coatings.
ACCESSION #
94898765

 

Related Articles

  • Scratch Cell Test: A Simple, Cost Effective Screening Tool to Evaluate Self-Healing in Anti-Corrosion Coatings. Rani, Amitha; Somaiah, Durga; Megha; Poddar, Mitalee // Journal of Materials Engineering & Performance;Sep2014, Vol. 23 Issue 9, p3328 

    A quick and simple scratch cell set up to evaluate the self-healing of an hybrid sol-gel (ormosil) coating was fabricated. This methacrylate-based anti-corrosion coating was applied on the aerospace aluminium alloy AA2024-T3, and cured at room temperature. This technique of evaluation requires...

  • Structural analysis and corrosion studies on an ISO 5832-9 biomedical alloy with TiO sol-gel layers. Burnat, B.; Dercz, G.; Blaszczyk, T. // Journal of Materials Science: Materials in Medicine;Mar2014, Vol. 25 Issue 3, p623 

    The aim of this study was to demonstrate the relationship between the structural and corrosion properties of an ISO 5832-9 biomedical alloy modified with titanium dioxide (TiO) layers. These layers were obtained via the sol-gel method by acid-catalyzed hydrolysis of titanium isopropoxide in...

  • Chemical Oxidation of an АМг-3 Type Alloy in Alkaline Molybdate-Containing Solutions. Kuznetsov, Yu. I.; Oleinik, S. V.; Khaustov, A. V. // Protection of Metals;Jul/Aug2003, Vol. 39 Issue 4, p311 

    A possibility to obtain conversion coatings (CCs) on an АМг-3 type aluminum alloy from alkaline molybdate-containing solutions (pH 12.8) is studied instead of its chromating. The effect of converting solution components on the resistance of thus obtained CCs to local anodic activation...

  • Characterization and corrosion performance of poly(pyrrole-siloxane) films on commercial Al alloys. Trueba, Monica; Trasatti, Stefano P. // Journal of Applied Electrochemistry;Nov2009, Vol. 39 Issue 11, p2061 

    An alternative approach was developed for the surface treatment of as-received commercial aluminium alloys 6082-T6, 5083-H111 and 2024-T3 by using a pyrrole-based silane. One immersion step is sufficient for poly(pyrrole-siloxane) film deposition, with good adhesion and desirable morphological...

  • Corrosion inhibition of aluminum alloy in H3PO4 solution using para-thiazolidinone derivatives. Fouda, A. S.; El-Sherbiny, M. F.; Motawea, M. M. // Desalination & Water Treatment;Jun2011, Vol. 30 Issue 1-3, p207 

    The influence of p-thiazolidinone derivatives as corrosion inhibitors for aluminum alloy in 3 M H3PO4 solution has been studied by weight-loss and galvanostatic polarization techniques. A significant decrease in the corrosion rate of aluminum was observed in the presence of these investigated...

  • Organic-inorganic hybrid sol-gel coatings for metal corrosion protection: a review of recent progress. Figueira, R.; Silva, C.; Pereira, E. // Journal of Coatings Technology & Research;Jan2015, Vol. 12 Issue 1, p1 

    This paper is a review of the most recent and relevant achievements (from 2001 to 2013) on the development of organic-inorganic hybrid (OIH) coatings produced by sol-gel-derived methods to improve resistance to oxidation/corrosion of different metallic substrates and their alloys. This review is...

  • Inorganic-Organic hybrid sol-gel coatings. Mishra, Brijesh // Paintindia;Oct2014, Vol. 64 Issue 10, p53 

    The development of hybrid materials has been extensively investigated in recent years. Hybrid sol-gel coating technology is one of the modern coating technologies to modify the surface property of metal without changing the metallic look of the surface. The combination of a wide variety of...

  • Casting out chromium. Hamdy Makhlouf, Abdel Salam // European Coatings Journal;Mar2012, Issue 3, p16 

    The article explores the use of aluminium and magnesium alloys in the automotive and aerospace industries. It mentions that despite that both alloys can reduce weight and fuel consumption, they are susceptible to corrosion. It notes the use of chromate-containing conversion coatings to protect...

  • AA2024 CORROSION PROTECTION BY HYBRID COATINGS INCORPORATED WITH Ce(III) AND Ce(IV) INHIBITORS. Matter, E. A.; Kozhukharov, S.; Gyozova, A.; Machkova, M.; Kozhukharov, V. // Journal of the University of Chemical Technology & Metallurgy;Dec2012, Vol. 47 Issue 5, p518 

    Sol-gel derived organo-titanate hybrid primer coatings loaded with rare earth corrosion inhibitors have been developed in order to provide reliable active and passive corrosion protection. The incorporation of the corrosion inhibitors into hybrid coatings has been achieved as a result of...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics