TITLE

Designing a Virtual laboratory for Simulating to Production of Nanocomposite NdFeB Magnets

AUTHOR(S)
Çakır, Musa Faruk; Tarımer, İlhan; Gürdal, Osman
PUB. DATE
February 2014
SOURCE
TEM Journal;Feb2014, Vol. 3 Issue 1, p8
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The talent figure for a permanent magnet is the multiplication of the maximum energy (BHmax). Less volume magnet is required for the production of magnet flux density if the BHmax value is higher. Mathematical functions are obtained from the data related to resiudal flux density, magnetic coercitivy, permanent magnet flux product capability, Curie temperature and density which were obtained as a result of the studies on different NdFeB alloys in the laboratory. Besides this, mathematical functions of NdFeB hard magnet's resiudal flux density are obtained by adding elements. In this study, a virtual laboratory for producing nanocompositedNdFeB magnet has been designed. The virtual laboratory software has been used to simulate NdFeB hard magnets for industrial utilities.
ACCESSION #
94733486

 

Related Articles

  • Preparation and Characterization of Polymeric Composite Permanent Magnet Nd2Fe14B. Muljadi; Sardjono, Priyo; Suprapedi // AIP Conference Proceedings;2016, Vol. 1719 Issue 1, p1 

    Preparation of polymeric composite magnets using isotropic NdFeB powder and polymeric materials (epoxy resin and latex rubber) have been investigated in this work. Isotropic powder NdFeB was crushed mechanically by hand mortar and sieved until passing 400 mesh. Epoxy Resin / latex rubber with...

  • Field enhancement in traveling wave tubes with tapered pole pieces. Clarke, John P.; Leupold, Herbert A. // Journal of Applied Physics;4/15/1988, Vol. 63 Issue 8, p3991 

    Investigates a pole-piece design that would allow a class of permanent-magnet focusing structures to produce useful flux and/or reduce the mass and bulk of the structure. Illustration of a conventional permanent-magnet focusing structure; Diagram of a pole-piece structure with copper cooling fins.

  • Improved magnetic properties and thermal stabilities of Pr-Nd-Fe-B sintered magnets by Hf addition. Jiang, Qingzheng; Lei, Weikai; Zeng, Qingwen; Quan, Qichen; Zhang, Lili; Liu, Renhui; Hu, Xianjun; He, Lunke; Qi, Zhiqi; Ju, Zhihua; Zhong, Minglong; Ma, Shengcan; Zhong, Zhenchen // AIP Advances;May2018, Vol. 8 Issue 5, pN.PAG 

    Nd2Fe14B-type permanent magnets have been widely applied in various fields such as wind power, voice coil motors, and medical instruments. The large temperature dependence of coercivity, however, limits their further applications. We have systematically investigated the magnetic properties,...

  • Magnetic properties and phase composition of nanocomposite rapidly hardened NdFeBM (M: Ti, Zr, Cr, Mo, Cu) STRIPS. Bordyuzhin, I.; Vidmanov, I.; Savchenko, A.; Menushenkov, V.; Lyubina, Yu. // Metal Science & Heat Treatment;Nov2012, Vol. 54 Issue 7/8, p334 

    Analysis of the effect of replacement of iron atoms with atoms of alloying components on the hysteresis properties of rapidly hardened alloys NdFeBM (M: Ti, Zr, Cr, Mo, Cu) is performed. The laws of variation of the hysteresis properties as a function of the temperature of crystallization...

  • Extension of Mathematical Models Taking Temperature Variation in Permanent Magnet Synchronous Motors into Consideration. NAKATSUGAWA, JUNNOSUKE; IWAJI, YOSHITAKA; ENOMOTO, YUJI // Electrical Engineering in Japan;May2017, Vol. 199 Issue 3, p48 

    SUMMARY We have developed novel mathematical models of d-axis and q-axis magnetic fluxes Ï•d and Ï•q for permanent magnet synchronous motors (PMSMs). The models can be used to approximate magnetic characteristics using simple fractional equations with id and iq as variables. They include...

  • Analysis of Casing Hanger Fluid Channel Performance. Chao Hou; Kai Zhang; Hongyan Wang; Shubin Tian; Wensheng Xiao; Jian Liu // Applied Mechanics & Materials;2014, Issue 607-609, p338 

    In this paper, calculating the deformation and the static strength of the fluid channel during the process of casing hanger running, well cementation and oil production with ANSYS. Researching the effect of the fluid channel deformation on drain and decompression, and the effect of the fluid...

  • Preparation of Nd-Fe-B/α-Fe nano-composite thick-film magnets on various substrates using PLD with high laser energy density above 10 J/cm2. Nakano, M.; Kondo, H.; Yamashita, A.; Yanai, T.; Itakura, M.; Fukunaga, H. // AIP Advances;May2018, Vol. 8 Issue 5, pN.PAG 

    PLD (Pulsed Laser Deposition) method with high laser energy density (LED) above 10 J/cm2 followed by a flash annealing enabled us to obtain isotropic nano-composite thick-film magnets with (BH)max ≧ 80 kJ/m3 on polycrystalline Ta substrates. We also have demonstrated that...

  • Effect of size and geometry on levitation force measurements between permanent magnets and high-temperature superconductors. Cha, Y. S.; Hull, John R.; Mulcahy, Thomas M.; Rossing, Thomas D. // Journal of Applied Physics;11/15/1991, Vol. 70 Issue 10, p6504 

    Presents a study that measured the levitation force between a permanent magnet (PM) and a high-temperature superconductor (HTS) and between pairs of PM, coupled with finite-element calculations of the forces and the fields. Effect of self-demagnetizing factor within HTS on magnetic pressure;...

  • A design of mini actuator for compact camera without using permanent magnet. Ching-Lung Tsai; Der-Cherng Liaw // Applied Mechanics & Materials;2014, Issue 607-609, p483 

    This paper presents a design of mini actuator without using permanent magnet for auto-focus (AF) compact camera module (CCM) built on mobile phone, tablet PC and notebook. The current through the coils of electromagnets will yield magnetic force to move the moving part up and down. Comparing...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics