TITLE

Investigation of Carbon Fiber Wetting Process by Wilhelmy Method and Force Analysis Method

AUTHOR(S)
Hui wang; Jizhi Huang; Xianggang Yin; Feng Wei
PUB. DATE
April 2014
SOURCE
Key Engineering Materials;2014, Vol. 591, p338
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Carbon fiber dynamic wetting measurement system is established based on DCAT 21 tensiometer. The same carbon fiber wetting property are measured by Wilhelmy method and based on force analysis method, which obtained the contact angle is 78.15? and 81? respectively. The results show that complicated preparation exists on the Wilhelmy method, as well as soft fiber is not suitable by this process. However, force analysis method can solve this problem, measuring speed of this method is quickly and applicable.
ACCESSION #
94621225

 

Related Articles

  • Measurement of dynamic/advancing/receding contact angle by video-enhance sessile drof tensiometry. Lin, Shi-Yow; Chang, Hong-Chi; Lin, Lung-Wei; Huang, Pao-Yao // Review of Scientific Instruments;Aug1996, Vol. 67 Issue 8, p2852 

    Focuses on the measurement of dynamic/advancing/receding contact angle by video-enhanced sessile drop tensiometry. Use of a technique to obtain the values of capillary constant and the radius of curvature at apex from the edge coordinates and the theoretical curve obtained from the Laplace...

  • The rewetting of an inclined solid surface by a liquid. Silvi, N.; Dussan V, E. B. // Physics of Fluids (00319171);Jan85, Vol. 28 Issue 1, p5 

    When a thin layer of liquid flowing down an inclined solid surface becomes unstable, a dry region may appear. It is of general engineering interest to identify the parameters which control the ability of the liquid to rewet the solid so that a uniform film of liquid can be reestablished. The...

  • The Effect of Surface Modification on the Interfacial Feature of Polystyrene Composite Filled with Carbon Fiber. Nie, W.; Li, X.; Sun, F. // Journal of Materials Engineering & Performance;Dec2010, Vol. 19 Issue 9, p1240 

    The quality of interfacial interaction is dictated by the surface chemistry of the carbon fibers and the composition of the matrix. The composition of polystyrene was modified by the addition of maleic anhydride-grafted polystyrene (MAH-g-polystyrene). The surface properties of various matrix...

  • On The measurement OF contact angle of droplets on fibers.  // Journal of Textile & Apparel Technology & Management (JTATM);Spring2001 Supplement, Vol. 1 Issue 3, pN.PAG 

    Presents an abstract of the study "On the Measurement of Contact Angle of Droplets on Fibers," by E. Shim, M. Srinavassarao and B. Pourdeyhimi.

  • Nonwoven electrowetting textiles. Bhat, K.; Heikenfeld, J.; Agarwal, M.; Lvov, Y.; Varahramyan, K. // Applied Physics Letters;7/9/2007, Vol. 91 Issue 2, p024103 

    Electrowetting of two nonwoven textile platforms is reported. Demonstrated nonwoven textiles include a polyethylene naphthalate film that was laser milled with ∼125 μm pores, and pressed paper that was made using wood microfibers of 35–50 μm diameter. Vacuum deposition provided...

  • Change in the Surface Properties of Carbon Fibers as a Result of Plasmochemical Modification. Shelestova, V. A.; Serafimovich, V. V.; Grakovich, P. N.; Hong, Jiang Xiao; Jin, Yuan-Sheng // Mechanics of Composite Materials;Sep/Oct2003, Vol. 39 Issue 5, p467 

    The influence of plasmochemical modification of carbon fibers on their surface properties and compatibility with the PTFE matrix is investigated. It is shown that the thin PTFE coating formed on the carbon fiber surface improves the wetting of the fibers by PTFE. As a result, the mechanical...

  • Change in the Surface Properties of Carbon Fibers as a Result of Plasmochemical Modification. Shelestova, V. A.; Serafimovich, V. V.; Grakovich, P. N.; Hong, Jiang Xiao; Jin, Yuan-Sheng // Mechanics of Composite Materials;Sep/Oct2003, Vol. 39 Issue 5, p467 

    The influence of plasmochemical modification of carbon fibers on their surface properties and compatibility with the PTFE matrix is investigated. It is shown that the thin PTFE coating formed on the carbon fiber surface improves the wetting of the fibers by PTFE. As a result, the mechanical...

  • TENSILE AND FLEXURAL STUDIES ON GLASS - CARBON HYBRID COMPOSITES SUBJECTED TO LOW FREQUENCY CYCLIC LOADING. Poyyathappan, K.; Bhaskar, G. B.; Pazhanivel, K.; Venkatesan, N. // International Journal of Engineering & Technology (0975-4024);Feb/Mar2014, Vol. 6 Issue 1, p83 

    Glass fiber reinforced polymeric composite (GFRP), Carbon fiber reinforced polymeric composite (CFRP), glass-carbon-glass, carbon-glass-carbon hybrid composite laminates have been prepared by hand layup method. The test specimens have been prepared according to ASTM standard size to carry out...

  • Contact angles and wetting velocity measured electrically. Verheijen, H.J.J.; Prins, M.W.M. // Review of Scientific Instruments;Sep99, Vol. 70 Issue 9, p3668 

    Describes two measurement techniques for studying the wetting behavior of a liquid on a surface. Measurement of the contact angle of a droplet, by measuring the capacitance between a conducting droplet and subsurface counter electrode; Detection of the current as a function of time, which...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics