Egry, Ivan; Sacadura, Jean-Francois
February 2014
High Temperatures -- High Pressures;2014, Vol. 43 Issue 1, pI
Academic Journal
An introduction to this issue of "High Temperatures -- High Pressures" is presented.


Related Articles

  • Atom force microscopy study on HTHP as-grown diamond single crystals. Yin, L.-W.; Li, M.-S.; Cui, J.-J.; Song, Y.-J.; Li, F.-Z.; Hao, Z.-Y. // Applied Physics A: Materials Science & Processing;2001, Vol. 73 Issue 5, p653 

    For understanding the mechanism of diamond growth at high temperature–high pressure (HTHP) from a metallic catalyst–graphite system, it is of great interest to perform atomic force microscopy (AFM) experiments, which provide a unique technique different from that of normal optical...

  • The Effect of High Pressures and High Temperatures on the Properties of Water Based Drilling Fluids. Amani, Mahmood; Al-Jubouri, Mohammed // Energy Science & Technology;8/31/2012, Vol. 4 Issue 1, p27 

    Tremendous amounts of hydrocarbons are located in deeper formations where higher pressures and temperatures are experienced. Designing a proper drilling fluid that can tolerate such high-pressure, hightemperature (HP/HT) conditions is a challenging task. The work presented in this paper is...

  • High pressure and high temperature phase transformations in LiNbO[sub 3]. Mukaide, T.; Yagi, T.; Miyajima, N.; Kondo, T.; Sata, N.; Kikegawa, T. // Journal of Applied Physics;4/1/2003, Vol. 93 Issue 7, p3852 

    A behavior of LiNbO[sub 3] under high pressure and temperature has been studied up to 90 GPa by means of high pressure in situ x-ray observations. Recovered samples were analyzed by transmission electron microscope (TEM). When the LiNbO[sub 3] was compressed at room temperature, a transformation...

  • Hydraulic hose -more than meets the eye.  // Plant & Works Engineering;Jul2012, Issue 364, p35 

    The article offers information on hydraulic hose, which is an operation-critical part of a range of plant and equipment used in industries including construction, agriculture, manufacturing, engineering and offshore. Hydraulic hose is used for carrying the flow of high-pressure oil safely and...

  • Boron-doped diamond heater and its application to large-volume, high-pressure, and high-temperature experiments. Shatskiy, Anton; Yamazaki, Daisuke; Morard, Guillaume; Cooray, Titus; Matsuzaki, Takuya; Higo, Yuji; Funakoshi, Ken-ichi; Sumiya, Hitoshi; Ito, Eiji; Katsura, Tomoo // Review of Scientific Instruments;Feb2009, Vol. 80 Issue 2, pN.PAG 

    A temperature of 3500 °C was generated using a diamond resistance heater in a large-volume Kawai-type high-pressure apparatus. Re and LaCrO3 have conventionally been used for heaters in high-pressure studies but they cannot generate temperatures higher than 2900 °C and make in situ x-ray...

  • Ta and Au(Pd) alloy metal film transducers for time-domain thermoreflectance at high pressures. Wen-Pin Hsieh; Cahill, David G. // Journal of Applied Physics;Jun2011, Vol. 109 Issue 11, p113520 

    We studied the pressure dependence of the thermoreflectance and piezo-optical coefficients of metal film transducers-Al, Ta, and Au(Pd) alloy (≈5 at. % Pd)-at a laser wavelength, 785 nm, commonly used in time-domain thermoreflectance (TDTR) and picosecond acoustics experiments. Al has...

  • Hot Isostatic Pressing (HIP) technology and its applications to metals and ceramics. Bocanegra-Bernal, M. H. // Journal of Materials Science;Nov2004, Vol. 39 Issue 21, p6399 

    This review examines some of the components of this increasingly exploited technology as well as the application of which will surely increase as a result of constant development in equipment design and extensive research in the field of ceramic and metal materials in general for the production...

  • Microfabricated silicon leak for sampling planetary atmospheres with a mass spectrometer. Jamieson, B. G.; Lynch, B. A.; Harpold, D. N.; Niemann, H. B.; Shappirio, M. D.; Mahaffy, P. R. // Review of Scientific Instruments;Jun2007, Vol. 78 Issue 6, p065109 

    A microfabricated silicon mass spectrometer inlet leak has been designed, fabricated, and tested. This leak achieves a much lower conductance in a smaller volume than is possible with commonly available metal or glass capillary tubing. It will also be shown that it is possible to integrate...

  • 3-Pentanone LIF at elevated temperatures and pressures: measurements and modeling. Modica, V.; Morin, C.; Guibert, P. // Applied Physics B: Lasers & Optics;Mar2007, Vol. 87 Issue 1, p193 

    The objective of this study is to investigate 3-pentanone fluorescence experiments in a constant volume vessel at high temperature and high pressure to underline the influent parameters in conditions close to those encountered in internal combustion engines. To obtain quantitative analysis,...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics