TITLE

Point x-ray source using graphite nanofibers and its application to x-ray radiography

AUTHOR(S)
Matsumoto, Takahiro; Mimura, Hidenori
PUB. DATE
March 2003
SOURCE
Applied Physics Letters;3/10/2003, Vol. 82 Issue 10, p1637
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A point x-ray emission was obtained from a diode configuration composed of a graphite-nanofiber cold cathode and a conical-shaped copper metal anode. When combined with a highly sensitive charge coupled device (CCD) camera with a scintillator, this x-ray source was then used to obtain x-ray transmission images of a tungsten mesh and an x-ray test chart. The spatial resolution of this x-ray radiography system was on the order of 10 µm and the acquisition time for these images was less than 10 s. This combination of the point x-ray source and the sensitive detection system offers a high-resolution x-ray radiography system.
ACCESSION #
9214357

 

Related Articles

  • Nanostructure evolution evolution of expanded graphite during high-energy ball-milling and subsequently annealing. Zhiguo Liu // Applied Mechanics & Materials;2014, Issue 552, p331 

    Expanded graphite (EG) was ball-milled in a high-energy mill (planetary-type) under an air atmosphere and subsequently annealed under a vacuum atmosphere. The products were characterized by X-ray diffraction (XRD). The results show that the ball-milling decreases the crystallization degree of...

  • Controlled growth of two-dimensional copper nanoplates in graphite gallery. Xiaobei BIN; Jiazang CHEN; Hong CAO // Turkish Journal of Chemistry;2011, Vol. 35 Issue 2, p181 

    No abstract available.

  • A Nanoporous Carbon/Exfoliated Graphite Composite For Supercapacitor Electrodes. Rosi, Memoria; Ekaputra, Muhamad P.; Iskandar, Ferry; Abdullah, Mikrajuddin; Khairurrijal // AIP Conference Proceedings;12/27/2010, Vol. 1325 Issue 1, p86 

    Nanoporous carbon was prepared from coconut shells using a simple heating method. The nanoporous carbon is subjected to different treatments: without activation, activation with polyethylene glycol (PEG), and activation with sodium hydroxide (NaOH)-PEG. The exfoliated graphite was synthesized...

  • Preparation of finely dispersed nanographite. Ioni, Yu.; Tkachev, S.; Bulychev, N.; Gubin, S. // Inorganic Materials;Jun2011, Vol. 47 Issue 6, p597 

    We have developed a convenient single-step method for producing stable nanographite dispersions from natural graphite in various solvents using high-power sonication. Nanographite dispersions in water are shown to be stable for several weeks, and aqueous nanographite dispersions containing a...

  • Cluster structure of nanoporous carbon produced from silicon carbide. Aleshina, L.; Loginov, D.; Fofanov, A.; Kyutt, R. // Physics of the Solid State;Aug2011, Vol. 53 Issue 8, p1739 

    X-ray diffraction studies of nanoporous carbon synthesized from silicon carbide have been performed. The coordination shell radii and the coordination number in nanoporous carbon have been calculated using the Finback method. It has been shown that, when the coordination shell radii coincide,...

  • Titanium Carbide Reinforcement in Iron Matrix Through Carbothermal Reduction of Mechanically Milled Hematite and Anatase. Zuhailawati, Hussain; Hassin, Mohd; Palaniandy, Samayamutthirian // Metallurgical & Materials Transactions. Part A;Feb2013, Vol. 44 Issue 2, p999 

    This study investigated the influence of the duration of milling on the formation of TiC-reinforced iron composite through carbothermal reduction of a hematite and anatase mixture. Mixtures of hematite, anatase, and graphite powders were mechanically activated in a planetary ball mill in an...

  • A Novel Micro-Nano Structure Profile Control Agent: Graphene Oxide Dispersion. Zhong-Bin Ye; Yuan Xu; Hong Chen; Chen Cheng; Li-Juan Han; Lin Xiao // Journal of Nanomaterials;2014, p1 

    Graphite oxide sheet, now referred to as graphene oxide (GO), is the product of chemical exfoliation of graphite and has been known for more than a century. A GO sheet is characterized by two abruptly different length scales; the apparent thickness of the functionalized carbon sheet is...

  • Coherent X-Ray Diffraction Imaging of Morphology and Strain in Nanomaterials. Harder, Ross; Robinson, Ian // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Sep2013, Vol. 65 Issue 9, p1202 

    The last decade has seen a remarkable surge in x-ray characterization methods (Willmott, An Introduction to Synchrotron Radiation, John Wiley & Sons, Inc., New York, 2011). Imaging with x-rays has evolved from simple radiography, to image internal structure and diagnose injury, to a full-fledged...

  • A simple hard x-ray “nanoslit” for measuring wavefront intensity. Takano, Hidekazu; Hashimoto, Takuto; Tsuji, Takuya; Koyama, Takahisa; Tsusaka, Yoshiyuki; Kagoshima, Yasushi // Review of Scientific Instruments;Jul2010, Vol. 81 Issue 7, p073702 

    A new method is proposed for nanoscale hard x-ray measurements. This method uses a reflection on a heavy-metal wire that functions as a single slit with a nanoscale aperture for a parallel x-ray beam. This “nanoslit” can be used to perform high-spatial-resolution measurements of the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics