TITLE

Magnetic Evaluation of Microstructure Changes in 9Cr-1Mo and 2.25Cr-1Mo Steels Using Electromagnetic Sensors

AUTHOR(S)
Liu, Jun; Strangwood, Martin; Davis, Claire L.; Peyton, Anthony J.
PUB. DATE
December 2013
SOURCE
Metallurgical & Materials Transactions. Part A;Dec2013, Vol. 44 Issue 12, p5897
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents results from a multi-frequency electromagnetic sensor used to evaluate the microstructural changes in 9Cr-1Mo and 2.25Cr-1Mo power generation steels after tempering and elevated temperature service exposure. Electromagnetic sensors detect microstructural changes in steels due to changes in the relative permeability and resistivity. It was found that the low frequency inductance value is particularly sensitive to the different relative permeability values of both steels in the different microstructural conditions. The changes in relative permeability have been quantitatively correlated with the microstructural changes due to tempering and long-term thermal exposure, in particular to changes in martensitic/bainitic lath size and number density of carbide precipitates that determine the mean free path to reversible domain wall motion. The role of these microstructural features on pinning of magnetic domain wall motion is discussed.
ACCESSION #
91988676

 

Related Articles

  • Interpreting Carburized Case Depths. Herring, Daniel H. // Industrial Heating;Aug2014, Vol. 82 Issue 8, p16 

    The article offers information on the methods and techniques used to determine total and effective case depth in carburized components. It discusses visual methods including macroscopic, which are used on the shop floor for routine process control, and microscopic, which are used for determining...

  • EFFECT OF pH AND HEAT TREATMENT ON PHYSICOCHEMICAL CHARACTERISTICS OF SODIUM PHOSPHOCASEINATE POWDER. Perveen, R.; Butt, M. S.; Huma, N.; Nawaz, H. // JAPS: Journal of Animal & Plant Sciences;Aug2015, Vol. 25 Issue 4, p1146 

    The present study was conducted to check the effect of alkalinization (pH 8 to 11), acidification (pH 6- 4) and temperature (60, 65, 70, 75, 80, 85 and 90ºC) on size, charge and viscosity of sodium phosphocaseinate powder after rehydrated in deionized water @ 3, 4 and 5% concentration at room...

  • Microstructural and Hardness Changes during Isothermal Annealing of Nanostructured Al-11.6Fe-1.3V-2.3Si Alloy. Ashrafi, H.; Emadi, R.; Enayati, M. // Journal of Materials Engineering & Performance;Feb2015, Vol. 24 Issue 2, p1026 

    Microstructural evolution and hardness change during isothermal annealing (300-550 °C, 30 min) of nanostructured Al-11.6Fe-1.3V-2.3Si alloy, prepared by mechanical alloying (MA) of elemental powders, were investigated using x-ray diffraction, transmission electron microscopy, and Vickers...

  • Influence of Initial Microstructures on Deformation Behavior of 316LN Austenitic Steels at 400-900 °C. Pei, Haixiang; Li, Shilei; Wang, Lixin; Zhang, Hailong; Zhao, Zhenduo; Wang, Xitao // Journal of Materials Engineering & Performance;Feb2015, Vol. 24 Issue 2, p694 

    Two batches of 316LN steels were processed differently to achieve specific initial microstructures. The influence of the initial microstructures on the deformation behavior of 316LN steels was investigated by tensile testing at 400-900 °C. Both ultimate tensile strength and yield strength of...

  • Nanocrystalline BaSnO3 as an Alternative Gas Sensor Material: Surface Reactivity and High Sensitivity to SO2. Marikutsa, Artem; Rumyantseva, Marina; Baranchikov, Alexander; Gaskov, Alexander // Materials (1996-1944);2015, Vol. 8 Issue 9, p6437 

    Nanocrystalline perovskite-type BaSnO3 was obtained via microwave-assisted hydrothermal route followed by annealing at variable temperature. The samples composition and microstructure were characterized. Particle size of 18-23 nm was unaffected by heat treatment at 275-700 °C. Materials...

  • Effect of Cr on Microstructure, Mechanical Properties, and Wear Behavior of In Situ 20 wt.%AlO/Fe-25Al Composites. Bai, Yaping; Xing, Jiandong; Guo, Yongchun; Li, Jianping; He, Yuanyuan; Ma, Shengqiang // Journal of Materials Engineering & Performance;Feb2015, Vol. 24 Issue 2, p936 

    In order to improve the room temperature ductility and high temperature strength of Fe-25Al alloys, in situ 20 wt.%AlO/Fe-25Al composites with 0, 1, 2, 3, 4, and 5 at.% Cr element contents (0-6.70 wt.%) were prepared by mechanical alloying inducing self-propagating reaction with subsequent...

  • Effect of Heat Treatment Process on Microstructure and Fatigue Behavior of a Nickel-Base Superalloy. Peng Zhang; Qiang Zhu; Gang Chen; Heyong Qin; Chuanjie Wang // Materials (1996-1944);2015, Vol. 8 Issue 9, p6179 

    The study of fatigue behaviors for nickel-base superalloys is very significant because fatigue damage results in serious consequences. In this paper, two kinds of heat treatment procedures (Pro.I and Pro.II) were taken to investigate the effect of heat treatment on microstructures and fatigue...

  • Conductometric Gas Sensors based on Nanostructured W03 Thin Films. Ahsan, M.; Tesfamichael, T.; Yarlagadda, Prasad KDV // Annual International Conference on Materials Science, Metal & Ma;2012, Vol. 2, p1 

    Nanostructured W03 thin films have been prepared by thermal evaporation to detect hydrogen at low temperatures. The influence of heat treatment on the physical, chemical and electronic properties of these films has been investigated. The films were annealed at 400°C for 2 hours in air. AFM...

  • Effect of Boron Addition and Initial Heat-Treatment Temperature on Microstructure and Mechanical Properties of Modified 9Cr-1Mo Steels Under Different Heat-Treatment Conditions. Das, C.; Albert, S.; Bhaduri, A.; Murty, B. // Metallurgical & Materials Transactions. Part A;May2013, Vol. 44 Issue 5, p2171 

    The effect of initial heat treatment on microstructure and mechanical properties of boron-free and boron-containing modified 9Cr-1Mo steel (P91 and P91B, respectively) has been studied under different heat-treatment conditions. The prior austenite grains evolved in P91 steel, having different...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics