TITLE

Synthesis and properties evaluation of ultra-high density drilling fluid dispersant

AUTHOR(S)
Xie Jianyu; Li Bin; Zhang Bin
PUB. DATE
September 2013
SOURCE
Chemical Engineering of Oil & Gas / Shi You Yu Tian Ran Qi Hua G;2013, Vol. 42 Issue 5, p496
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Ultra-high density drilling fluid dispersant JZ-1 was synthesized by graft copolymerzation of natural materials and vinyl monomer. The effects of molecular weight regulator, AMPS and raw materials ratio on the dispersant properties were studied. Copolymerization was characterized with IR. Thermal stability of copolymer was measured by thermal analysis. Barite surface potential was studied by Zeta potential instrument. The mud properties of copolymer as dispersant for drilling fluids were evaluated in laboratory. The experimental results showed that funnel viscosity decreased from 282 s to 130 s when 2% JZ-1 were added to the drilling fluid with he density of 2.8 g/cm³, and the rheology behavior and sedimentation stability of drilling fluid were improved significantly.
ACCESSION #
91977099

 

Related Articles

  • Environmentally Compliant, Deflocculating Wetting and Dispersing Agent for Aqueous Dispersions. Stesikova, Dr. Elvira; Drewno, Gregory; Lee, Ronald; Kelly, John; Wildeson, Jacob // Paint & Coatings Industry;Apr2010, Vol. 26 Issue 4, p80 

    The article focuses on techniques used in aqueous dispersions in the coatings industry. It relates that rheological evaluation is the most common technique used for assessing pigment dispersant effectiveness in formulations. It adds that water resistance is a primary concern in formulating...

  • Influence of Organic Additives on the Efficiency of Process of Preparation of Molding Compounds for Magnesium Silicate Ceramic. Zemlyanoi, K.; Moskovskikh, N. // Refractories & Industrial Ceramics;Mar2013, Vol. 53 Issue 6, p348 

    The influence of Litoplast series additives on the rheological properties of clay-free magnesium silicate slip is investigated. The use of Litpolast grinding intensifiers makes it possible to decrease the duration of grinding of commercial slip by 3 − 7%. The use of Litoplast M dispersing...

  • Drag Reduction of Turbulent Flow by Additives. Jinjia Wei; Yasuo Kawaguchi; Bo Yu // Advances in Mechanical Engineering (Hindawi Publishing Corporati;2011, Vol. 2011, p1 

    An introduction is presented in which the editor discusses various reports within the issue on topics including turbulent drag reduction by additives, heat transfer and rheology.

  • Dissolution of a Drop with a High Content of a Surface-Active Substance. Kostarev, K. G.; Briskman, V. A. // Doklady Physics;May2001, Vol. 46 Issue 5, p349 

    Studies the dissolution of a drop of a binary mixture with a high content of surface-active substance. Spherical and cylindrical drops; Discovery of a new phenomenon, the reappearance of large-scale motion at the ultimate quasi-diffusive stage of dissolution; Streams and concentration fields...

  • Estimation of CTAB in water by ion chromatography. Subramanian, K. G.; Raja, S.; Panigrahi, B. S. // Indian Journal of Science & Technology;Jul2010, Vol. 3 Issue 7, p718 

    Surfactants are used in cooling water systems to keep the precipitating chemicals in dispersed condition and thus to deter the scale formation. The choice of using cationic or anionic surfactant as dispersants depends on the chemical nature of the raw water. At the same time, estimation of...

  • FOAMER ABILITY OF OLIGOETHERPHOSPHATE SURFACTANT. KONSTANTINOVA, E. P.; NIKOLAEV, P. V.; ROZHKOVA, E. P. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2012, Vol. 55 Issue 9, p56 

    The method of quantitative estimation of air-mechanical foams stability based on kinetics of emission of water solutions of surfactant was proposed. The ratio of instability constants of spherical and polyhedral foams was found. Properties of foams obtaining from water solutions of aliphatic and...

  • Structural Characterization and Property Analysis of Surface-Active Substance Accumulated During Biodegradation of Hydrophobic α-Pinene by Pseudomonas fluorescens. Cheng, Zhuo-Wei; Chen, Jian-Meng; Yu, Jian-ming; Li, Shan-Shan; Jiang, Yi-Feng // Water, Air & Soil Pollution;Apr2013, Vol. 224 Issue 4, p1 

    The connection between hydrocarbon biodegradation and surface-active substance production has attracted great interest in recent years. Pseudomonas fluorescens PT, isolated from a biotrickling filter, was not only able to degrade α-pinene but also to use it as a carbon source to produce a...

  • Effect of nonionogenic surfactants and a magnetic field on the rheological properties of highly viscous crude oils. Shiryaeva, R.; Kudasheva, F.; Gimaev, R. // Chemistry & Technology of Fuels & Oils;May2008, Vol. 44 Issue 3, p172 

    The rheological properties of crudes from the Mordovo-Karmaly and Mortukovsk fields were investigated at 10–70°C in the presence of surfactants (SF) and in a magnetic field. The maximum decrease in the characteristics was attained in UHF treatment for the Mortukovsk crude and on...

  • Developing a Modified Preservative Efficacy Testing Approach as a Predictive Tool for the Evaluation of Preservative Systems in Liquid Home Care Products Under Variable Test Conditions. Hoyt, Anne L.; Bushman, Don; Lewis, Nathan; Faber, Robert // Journal of AOAC International;Jan/Feb2012, Vol. 95 Issue 1, p203 

    The article presents a study which developed a modified preservative efficacy testing approach as a predictive tool for the evaluation of preservative systems in a liquid home care products. It states that extreme conditions that can result to the development of bad odors in the product can be a...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics