Research on Characteristic of Capacitor under Strong Stress

Chen Yong; Cheng Yong-sheng
November 2013
Journal of Applied Sciences;2013, Vol. 13 Issue 22, p5483
Academic Journal
Firstly, the physical mechanism of characteristic of capacitor under strong stress is discussed theoretically in the study. Secondly, as to the multi-fields coupling simulation, this study put originally forward a simple method to simulate the physical process by establishing the interface between ANSYS/LS-DYNA module and ANSYS/EMAG module in order to overcome the difficulty of no available software for the simulation at present. Finally, hammerblow test was carried out to study the physical process fartherly and the test result was analyzed.


Related Articles

  • 3D-Computer Modelling of Contact Interaction between Spherical Indenter and Elastic-Plastic Body. SHIMANOVSKY, Alexandr O.; ABDULKADER, Mohammed H. // Applied Mechanics & Materials;2015, Vol. 816, p234 

    Computer simulation of contact interaction between a spherical indenter and soil surface was performed by the means of ANSYS software. It was assumed that the soil was deformed elastically-plastically in accordance with the model Drucker-Prager. It was carried out the analysis of the influence...

  • Study of Multi Pass Equal Channel Angular Pressing Using 3D Finite Element Analysis. Setia, Rajat; Sharma, Rahul Swarup; Sharma, Shanti Swarup; Raj, K. Hans // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p530 

    Equal Channel Angular Pressing (ECAP) has emerged as most prominent Severe Plastic Deformation (SPD) technique used to produce an ultrafine grained (UFG) structure in metals in order to improve their mechanical and physical properties. In this work Finite Element modeling of ECAP is attempted in...

  • Atomic scale stresses and strains in Ge/Si(001) nanopixels: An atomistic simulation study. Makeev, Maxim A.; Yu, Wenbin; Madhukar, Anupam // Journal of Applied Physics;10/15/2004, Vol. 96 Issue 8, p4429 

    Recent progress in the growth of nanostructures on nonplanar (patterned) substrates has brought to the forefront issues related to atomic-level surface and subsurface stress and strain field variations, as these govern the process of formation of such nanostructures and strongly affect their...

  • The Friction Model of Dynamic-wheel Model based on LuGre Model. Hsin Guan; Chunguang Duan; Pingping Lu // Applied Mechanics & Materials;2014, Issue 556-562, p4288 

    With the development of the simulator and the increase of vehicle model simulation frequency, the ring tire models become the research focus. The ring model considers the physical characteristics of the tire, thus it can more accurately describe the tire force transmission. State Key Laboratory...

  • Evolution of Bulk Strain Solitons in Cylindrical Inhomogeneous Shells. Shvartz, A.; Samsonov, A.; Dreiden, G.; Semenova, I. // AIP Conference Proceedings;2015, Vol. 1685 Issue 1, p1 

    Bulk strain solitary waves in nonlinearly elastic thin-walled cylindrical shells with variable geometrical and physical parameters are studied, and equation for the longitudinal strain component with the variable coefficients is derived. A conservative finite difference scheme is proposed, and...

  • Non-planar substrate effect on the interface trap capacitance of metal-oxide-semiconductor structures with ultra thin oxides. Tseng, Po-Hao; Hwu, Jenn-Gwo // Journal of Applied Physics;Nov2012, Vol. 112 Issue 9, p094502 

    Redistribution of interface trap capacitance (Cit) was observed in non-planar substrate metal-oxide-semiconductor (MOS) capacitors with ultra thin oxides. It was found that the behavior of Cit of non-planar substrate MOS capacitors is dependent on the non-planar portion. The non-planar devices...

  • Finite element analysis of notch tensile behavior of alloy 718. Sridhar, A.; Srivathsa, B. // AIP Conference Proceedings;Jun2013, Vol. 1536 Issue 1, p1272 

    Notch tensile behavior of alloy 718 is characterized in conventionally heat treated condition as a function of U and V notches at 25, 200 & 400 °C. The experimental results were then compared with the values obtained from simulation of notched geometries in ANSYS software using smooth...

  • Determination of Stresses and Forces on the Orthodontic System by Using Numerical Simulation of the Finite Elements Method. FERČEC, J.; GLIŠIĆ, B.; ŠĆEPAN, I.; MARKOVIĆ, E.; STAMENKOVIĆ, D.; ANŽEL, I.; FLAŠKER, J.; RUDOLF, R. // Acta Physica Polonica, A.;Oct2012, Vol. 122 Issue 4, p659 

    This study was addressed to use knowledge about the orthodontic system with numerical simulation of the finite elements method. For the first time we simulated the stresses on the orthodontic system and, in this manner, calculated the orthodontic force on the tooth. A 3D orthodontic model or...

  • Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and Bending. Martinezhyphen;Lopez, A.; van den Boogaard, A. H. // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p413 

    The plastic behavior of AHSS is still far from being completely understood, and its prediction is of large importance in reliability of forming simulation in present automotive industry [1]. Conventional techniques have been proven to be not accurate enough, and underestimate the formability...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics