TITLE

Research on Aluminum Brass Alloy Hot Compressive Deformation Characteristics

AUTHOR(S)
LI Xu-Bin; Zhang Zhi-Min
PUB. DATE
November 2013
SOURCE
Journal of Applied Sciences;2013, Vol. 13 Issue 22, p5458
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
HAL60-1-1 aluminum brass alloy hot compression characteristics have been investigated for its microstructure examination in Gleeble-1500 thermal simulation experiments in strain rate of 0.01-10S-1, deformation temperature of 650-800°C, Analyzed the rheological stress, the flow stress is reduced with deformation temperature increased and increased with the increase in strain rate. When alloy processing temperature at 750°C and the deformation rate in 0.1 S-1,the primary alpha phase has equiaxial shape and uniform composition, the alloy dynamic recovery is flat and the deformation has lowest reinforcement.
ACCESSION #
91943557

 

Related Articles

  • On the improvement of material formability in SPIF operation through tool stirring action. Buffa, G.; Campanella, D.; Fratini, L. // International Journal of Advanced Manufacturing Technology;Jun2013, Vol. 66 Issue 9-12, p1343 

    Single-point incremental forming (SPIF) is a quite new sheet-forming process which offers the possibility to deform complex parts without dedicated dies using a single-point tool and a standard three-axis CNC machine. The process mechanics enables higher strains with respect to traditional...

  • Ultrafine-grained structure produced by FSW and ECAP in Al-Mg-Sc-Zr alloy: Comparison. Kulitskiy, Vladislav; Malopheyev, Sergey; Buranova, Yulia; Divinski, Sergiy; Wilde, Gerhard; Kaibyshev, Rustam // Materials Science Forum;2016, Vol. 838/839, p379 

    The Al-5.4Mg-0.2Sc-0.1Zr alloy with initial coarse grained structure and containing coherent nanoscale Al3(Sc,Zr) particles with an average size of ~9 nm was subjected to equal channel angular pressing (ECAP) at temperatures ranging from 300 to 450°C up to a total strain of ~12 and friction...

  • Thermal analysis study on the simultaneous grain refinement and modification of 380.3 aluminum alloy. Malekan, Mehdi; Dayani, Davood; Mir, Alireza // Journal of Thermal Analysis & Calorimetry;Jan2014, Vol. 115 Issue 1, p393 

    In this research, effect of integrated Al-10Sr-1Ti-2B master alloy has been studied on the microstructure and solidification characteristics of 380.3 aluminum alloy. Thermal Analysis has been used as a technique to study the cooling curves and first derivative curves during solidification of the...

  • A method for thermal performance modeling and simulation of machine tools. Zhang, Jianfu; Feng, Pingfa; Chen, Chuang; Yu, Dingwen; Wu, Zhijun // International Journal of Advanced Manufacturing Technology;Feb2014, Vol. 68 Issue 5-8, p1517 

    The development of precision machine tools requires an accurate understanding of the thermal behaviour of the tools. Therefore, by developing highly accurate machine tool thermal behaviour simulations, it can accurately forecast the functional performance of a machine tool at the prototype...

  • A method for thermal performance modeling and simulation of machine tools. Zhang, Jianfu; Feng, Pingfa; Chen, Chuang; Yu, Dingwen; Wu, Zhijun // International Journal of Advanced Manufacturing Technology;Sep2013, Vol. 68 Issue 5-8, p1517 

    The development of precision machine tools requires an accurate understanding of the thermal behaviour of the tools. Therefore, by developing highly accurate machine tool thermal behaviour simulations, it can accurately forecast the functional performance of a machine tool at the prototype...

  • Experimental study on the effect of mechanical stirring in semisolid processing of Aluminum alloys at thixo-temperatures. Kishore, M. V.; Rao, D. Hanumantha; Hussain, M. Manzoor // Materials Science Forum;2015, Vol. 830-831, p41 

    Semisolid metal processing (SSMP) is a relatively new technology for production of near net shaped components. This process is carried out at a temperature range between its liquidus and solidus temperature. At thixo-temperatures, the metal exists as a mixture of solid and liquid phases in the...

  • Deformation Behavior of Press Formed Shell by Indentation and Its Numerical Simulation. Yamashita, Minoru; Bin Khalil, Zubair // Journal of Engineering (2314-4912);10/8/2015, Vol. 2015, p1 

    Deformation behavior and energy absorbing performance of the press formed aluminum alloy A5052 shells were investigated to obtain the basic information regarding the mutual effect of the shell shape and the indentor. Flat top and hemispherical shells were indented by the flat- or...

  • Research on compressive behavior and deformation heating of 7075-T6 aluminum alloy during hot compression. Wang, D. G.; Mei, R. B.; Cai, B.; Zhang, C. L.; Bao, L.; Zhang, B.; Li, C. S. // Advanced Materials Research;2014, Issue 887-888, p315 

    The flow stress behavior of the 7075-T6 aluminum alloy was studied through single-pass compression experiment by using MMS-300 simulator within temperature range of 300-450°C and strain rate range of 0.01-40s-1. Then a simulation of compression was carried out and the influence of deformation...

  • Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites Under Repeated Impact Loading. Cao, D.; Liu, L.; Liu, Q.; Li, S. // Strength of Materials;Jan2015, Vol. 47 Issue 1, p61 

    Under repeated impact loading, SiC particle-reinforced aluminum matrix composites (SiCp/Al) experience severe plastic strains, which can lead to local changes in their microstructure. Microstructural variations have a significant effect on the dynamic behavior of SiCp/Al composites under...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics