Computer-aided checking systems for the geometric parameters of objects based on wide-range tracking fluidic sensors

Sergeev, A. S.; Lesnoi, B. V.
November 2013
Automation & Remote Control;Nov2013, Vol. 74 Issue 11, p1903
Academic Journal
This paper demonstrates the efficiency of wide-range tracking fluidic sensors in computer-aided checking systems. The functional models of air sensors are studied depending on influencing factors. The results obtained allow estimating transient processes, amplitude errors and phase errors, as well as metrological characteristics of tracking air sensors in computer-aided checking systems.


Related Articles

  • Analysis and design consideration of solar steam generation plant using parabolic trough collector. Bataineh, Khaled // Mechanika;2015, Vol. 21 Issue 5, p384 

    This paper investigates the annual performance of solar steam generation plant SSGP using parabolic trough collectors via heat exchanger. A transient thermal model for the system is developed. Dynamic simulation of the SSGP is carried out under different operating and geometrical conditions to...

  • Experience in Development of Translators for AP203 Edition 2 Construction History. Barber, Sharon L.; Junankar, Amar; Maitra, Saurabh; Iyer, Ganeshram; Devarajan, Venkat // Computer-Aided Design & Applications;2010, Vol. 7 Issue 4, p565 

    Over the last two decades, the mechanical CAD industry has witnessed the development of many powerful 3D CAD software products built upon proprietary geometric kernals. The ISO 10303 STEP standard was developed, with the Application Protocol (AP 203) in particular, to provide a medium for...

  • An analytical wear model based on CAD measurements in polyamide pinion under different working environments. Bounamous, B.; Ghalloudj, W.; Amirat, A.; Chateauneuf, A.; Chaoui, K. // Mechanika;2013, Vol. 19 Issue 4, p466 

    This study proposes a method to assess wear in polyamide gears by measuring the volume of worn material from teeth flanks of a pinion under actual service conditions. Measurements are conducted using a microscope combined with a computer aided design "CAD" technique. First, a raster image of a...

  • Wind Turbine Blade CAD Models used as Scaffolding Technique to Teach Design Engineers. Irwin, John // Engineering Design Graphics Journal;Spring2013, Vol. 77 Issue 2, p1 

    The Siemens PLM CAD software NX is commonly used for designing mechanical systems, and in complex systems such as the emerging area of wind power, the ability to have a model controlled by design parameters is a certain advantage. Formula driven expressions based on the amount of available wind...

  • The development of a standard component library for plastic injection mould design using an object-oriented approach. Yong-Sheng Ma; Shu Beng Tor; Britton, Graeme A. // International Journal of Advanced Manufacturing Technology;Nov2003, Vol. 22 Issue 9/10, p611 

    Very often, outsourced components (known as standard components) are used for reducing design effort and product cost in mould design. They are usually manufactured by specialised suppliers. 3D CAD parametric models of these components will significantly reduce mould design lead-time and cost,...

  • The Construction of Evaluation Mathematical Model in Mechanical Industrial Design. Yun Mei; Xiaolin Ma // International Journal of Advancements in Computing Technology;Oct2012, Vol. 4 Issue 19, p523 

    Industrial design originally focused on product development, computer-aided industrial design system is more and more popular for product design. This paper constructs mathematical model for mechanical industrial design, it uses finite element method to improve the parameters analysis, reduce...

  • A practical optimization design of helical geometry drill point and its grinding process. Yan, Lan; Jiang, Feng // International Journal of Advanced Manufacturing Technology;Feb2013, Vol. 64 Issue 9-12, p1387 

    Drill with helical geometry drill point was developed to avoid the disadvantages of planar drill. For the visualization design and optimization of helical drill, a numerical modeling and simulation CAD system has been developed based on the mathematical models of helical drill. The...

  • Nuevos métodos de definición de modelos: El diseño asociativo y generativo. Rubio-García, Ramón; Martín-González, Santiago; Martín-Laguna, Santiago; Fernández-Morán, José Carlos // DYNA - Ingeniería e Industria;ene2013, Vol. 88 Issue 1, p25 

    No abstract available.

  • GENERATIVE MODEL OF SPUR GEARING. NEMČEKOVÁ, Miroslava // Annals of the Faculty of Engineering Hunedoara - International J;2014, Vol. 12 Issue 4, p231 

    Generative design is a branch or a concept in the field of designing that typically uses codes, patterns, and algorithms to create some product that can be generated as CAD model in various designs. In spite of the fact that gearing in gearbox is not most typical part of a car that is...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics