TITLE

WELDING TODAY AND TOMORROW

AUTHOR(S)
PILARCZYK, J.; ZEMAN, W.
PUB. DATE
October 2013
SOURCE
Paton Welding Journal;Oct/Nov2013, Issue 10/11, p61
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
It has been presented the huge changes in the Polish welding engineering which occurred in the last 20 years: in ownership among producers of welding equipment and materials, in investments which have been carried out, in the influence of free market, in the importance of knowledge and in the emerging of the people's own potential. These factors enabled to decrease the distance between the Polish and world welding level.
ACCESSION #
91906439

 

Related Articles

  • MICRO-WELDING OF ALUMINUM ALLOY BY SUPERPOSITION OF PULSED Nd:YAG LASER AND CONTINUOUS DIODE LASER. Y. OKAMOTO; S. NAKASHIBA; T. SAKAGAWA; A. OKADA // Paton Welding Journal;Oct/Nov2013, Issue 10/11, p105 

    The combination of a pulsed Nd:YAG laser and a continuous diode laser could perform the high-performance micro-welding of aluminum alloy. A pulsed Nd:YAG laser was absorbed effectively from the beginning of laser scanning by pre-heating Nd:YAG laser pulse with the superposition of continuous LD,...

  • Numerical simulation and investigation of high frequency tube welding process. Nikanorov, Aleksandr; Baake, Egbert; Neumeyer, Jörg // Applied Mechanics & Materials;2014, Vol. 698, p245 

    Welding processes and installations used nowadays are mainly developed on practical experience and analytical calculations. Nevertheless, high frequency induction tube welding is a very complex three-dimensional dynamic process, where the electromagnetic and thermal characteristics are...

  • Provide a component when a force changes direction. Blodgett, Omer W. // Welding Design & Fabrication;Jul2004, Vol. 77 Issue 7, p0 

    Discusses several welding techniques. Need to provide a component when a force changes direction; Requirement for equilibrium to exist in assembly; Technique in performing knee configuration.

  • FLUX CORED ARC WELDING. PACKARD, KEITH; MONK, ANDY // Rock Products;Mar2009, Vol. 112 Issue 3, p30 

    The article examines the challenges and difficulties that occur during shelf-shielded flux cored arc (FCA) welding and how to correct them. It identifies and explains common errors such as birdnesting, a process that tangles and stops the feeding of wires, and burnback formation, a process that...

  • Letters. Blake, Richard; Odermatt, Andre A.; Rahn, Mike; Evans, Phil // Welding Design & Fabrication;Apr2006, Vol. 79 Issue 4, p10 

    Several letters to the editor are presented that congratulates the Journal for creating a valuable resource for those who seek training and industry who needs welders, expresses disappointments of not including her institution to the listing of welding schools in Iowa, and expresses gratefulness...

  • No Secondary Members! Blodgett, Omer W. // Welding Design & Fabrication;Apr2004, Vol. 77 Issue 4, p18 

    The article focuses on the welding designing. It shows a box member, which is used as the central portion of a device called a 'log roller' used for washing gravel. The box was fabricated from four angles welded together. Because the assembly with its attached paddles functions by rolling in...

  • Dissimilar Friction Stir Welds in AA5083-AA6082. Part I: Process Parameter Effects on Thermal History and Weld Properties. Peel, M. J.; Steuwer, A.; Withers, P. J.; Dickerson, T.; Shi, Q.; Shercliff, H. // Metallurgical & Materials Transactions. Part A;Jul2006, Vol. 37 Issue 7, p2183 

    The aim of this study was to explore the so-called processing window, within which good-quality welds can be produced, for the friction stir welding of AA5083 to AA6082. To that end a systematic set of nine instrumented welds were made using rotation speeds of 280, 560, and 840 rpm and traverse...

  • Dissimilar Friction Stir Welds in AA5083-AA6082. Part II: Process Parameter Effects on Microstructure. Peel, M. J.; Steuwer, A.; Withers, P. J. // Metallurgical & Materials Transactions. Part A;Jul2006, Vol. 37 Issue 7, p2195 

    The aim of this study is to explore the bounds of the so-called processing window, within which good-quality welds can be produced, for the friction stir welding of AA5083 to AA6082 using a systematic set of rotation and traverse speeds. The first paper in this series examined the thermal and...

  • INDUSTRY AND WELDING.  // Welding Design & Fabrication;Oct2005, Vol. 78 Issue 10, p48 

    Presents excerpts related to the welding industry. Fred L. Plummer of the Case School of Applied Science wrote about the increased use of welding in construction. During the past fifteen years, the use of welding in the structural field has gradually increased until now welding should be...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics