Collier, Harvest L.
February 2003
Industrial Paint & Powder;Feb2003, Vol. 79 Issue 2, p50
Trade Publication
Presents a questions-and-answer advisory related to coating systems. Role of additives in the enhancement of dry-film performance properties of coatings; Influence of film-forming temperature on a latex coating; Degradation process of the system.


Related Articles

  • Electrical Properties of High Temperature Insulation Coatings under various Pressures at 298 K and 77 K. Cakiroglu, O.; Arda, L. // AIP Conference Proceedings;2007, Vol. 899 Issue 1, p431 

    The high temperature insulation coatings were prepared using solution of Mg and Zr based precursors. Then the MgO-ZrO2 coating was applied on long-length Stainless-Steel tapes using a non-vacuum reel-to-reel sol-gel dip coating technique. The thicknesses of coatings 7, 12 and 15 μm for 4, 8...

  • Formulating Polyureas: History and Advances. Buck, Kevin A. // Journal of Protective Coatings & Linings;Mar2013, Vol. 30 Issue 3, p38 

    The article provides information on polyurea elastomer coatings which can be classified into three categories namely polyurethane, polyurea and hybrid polyurethane/polyurea. It discusses the advantages offered by these coatings over traditional alternative chemistries including fast cure,...

  • POWDER COATING. Gronowski, Glenn E. // Industrial Paint & Powder;Aug2005, Vol. 81 Issue 8, p52 

    Presents a section that lists question-and-answer articles about powder coating. Level of temperature and humidity that the powder can handle without a problem; Contaminants that can have detrimental effect to a quality finish on a powder coated part; Availability of some filter materials for...

  • The Surface Density of States of Superfluid 3He for Different Surface Boundary Conditions. Satoshi Murakawa; Yuichiro Wada; Yuta Tamura; Masamichi Saitoh; Yuki Aoki; Ryuji Nomura; Yuichi Okuda // Journal of Low Temperature Physics;Feb2008, Vol. 150 Issue 3/4, p154 

    Abstract   We measured the complex transverse acoustic impedance of superfluid 3He in the B phase by coating a surface with 4He to study the boundary condition dependence of the surface bound states. Observed features in the temperature dependence were similar to those without...

  • Materials Progress: Heat Treating/Coating.  // Advanced Materials & Processes;Jan1999, Vol. 155 Issue 1, p20 

    Reports on materials progress in heat treating/coating. Cryogenic and laser systems; Application of electron beams to ceramic coatings to engine components; Laser treatment's reduction of steel rail friction; Coating's prevention of corrosion in rare-earth magnets.

  • Micro Conformal Coating Intricate Electronic Devices. Urquhart, Jon // SMT: Surface Mount Technology;Sep2010, Vol. 25 Issue 5, p36 

    The article focuses on the challenges faced by manufacturers in the adoption of innovative methods for micro conformal coating. As, due to the variation in the viscosity of the coating chemical due to temperature, pot life or shell life, it is difficult to dispense a consistent product. It also...

  • High power laser damage of standard and bend resistant fibres. Logunov, S. L.; Chien, C.-K.; Clark, D. A. // Electronics Letters;9/24/2009, Vol. 45 Issue 20, p1019 

    Optical fibre coating degradation under high power is directly linked to power dissipated in the bend. Bend insensitive fibres have much weaker heating response to the same input power in the bend than more bend sensitive fibres. Fibre lifetime predictions under high power and bending also are...

  • Electrical quality of low-temperature (Tdep≤800 °C) epitaxial silicon: The effect of deposition temperature. Burger, W. R.; Reif, R. // Journal of Applied Physics;1/15/1988, Vol. 63 Issue 2, p368 

    Investigates the effect of deposition temperature on the electrical quality of low-temperature epitaxial silicon. Components of silicon epitaxy process; Methodology of the study; Discussion on the results of the study.

  • Cutting-Edge Approaches to Coating Wood. Palmer, Jeff // Products Finishing;Aug2003, Vol. 67 Issue 11, p24s 

    Discusses various approaches to powder coat wood and wood products. Benefits of reducing heat requirements during powder coating of wood; Presence of curved linear shapes and variety of colors in wooden office furniture, due to powder coating; Products to be benefited from formulation of new...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics