TITLE

Analysis of Peak-to-Peak Current Ripple Amplitude in Seven-Phase PWM Voltage Source Inverters

AUTHOR(S)
Grandi, Gabriele; Loncarski, Jelena
PUB. DATE
September 2013
SOURCE
Energies (19961073);Sep2013, Vol. 6 Issue 9, p4429
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Multiphase systems are nowadays considered for various industrial applications. Numerous pulse width modulation (PWM) schemes for multiphase voltage source inverters with sinusoidal outputs have been developed, but no detailed analysis of the impact of these modulation schemes on the output peak-to-peak current ripple amplitude has been reported. Determination of current ripple in multiphase PWM voltage source inverters is important for both design and control purposes. This paper gives the complete analysis of the peak-to-peak current ripple distribution over a fundamental period for multiphase inverters, with particular reference to seven-phase VSIs. In particular, peak-to-peak current ripple amplitude is analytically determined as a function of the modulation index, and a simplified expression to get its maximum value is carried out. Although reference is made to the centered symmetrical PWM, being the most simple and effective solution to maximize the DC bus utilization, leading to a nearly-optimal modulation to minimize the RMS of the current ripple, the analysis can be readily extended to either discontinuous or asymmetrical modulations, both carrier-based and space vector PWM. A similar approach can be usefully applied to any phase number. The analytical developments for all different sub-cases are verified by numerical simulations.
ACCESSION #
90506534

 

Related Articles

  • Simulation and Analysis of PI and NN Tuned PI Controllers for Transformer Based Three-Phase Multi-level Inverter with MC-PWM Techniques. Dasari, Manikana Swamy; Mani, Venkatesan // Journal Européen des Systèmes Automatisés;Dec2019, Vol. 52 Issue 6, p587 

    The proposed work mainly deals with transformer-based three-phase Multi-Level Inverter (MLI) where the switches in MLI are controlled by Multi-Carrier PWM (MC-PWM) techniques. In this article, 48V DC input voltage is fed to 48/400V High-Voltage DC-DC boost converter which is controlled by...

  • High Performance Single-Phase Single-Stage Grid-Tied PV Current Source Inverter Using Cascaded Harmonic Compensators. Zakzouk, Nahla E.; Abdelsalam, Ahmed K.; Helal, Ahmed A.; Williams, Barry W. // Energies (19961073);Jan2020, Vol. 13 Issue 2, p380 

    In this paper, a single-phase single-stage photovoltaic (PV) grid-tied system is investigated. The conventional pulse width modulated (PWM) voltage source inverter (VSI) is replaced by a PWM current source inverter (CSI) for its voltage boosting capabilities, inherent short-circuit proof and...

  • ANALYSIS OF DYNAMIC PERFORMANCE COMPARISON OF DIFFERENT PWM TECHNIQUES INVERTER FED INDUCTION MOTOR DRIVES. DINESHKUMAR, S.; VENKATESH, R.; SRIRANJANI, R.; JAYALALITHA, S. // Journal of Theoretical & Applied Information Technology;4/20/2014, Vol. 62 Issue 2, p499 

    PWM Inverter fed induction motor drive plays a major role in industrial application such as drilling mills, crane, hoist etc. The major problem in Pulse Width Modulation(PWM) inverter is torque ripple, fluctuation in stator current and transient response of the speed. This paper deals with the...

  • Continuous dynamic sliding mode control strategy of PWM based voltage source inverter under load variations. Anjum, Waqas; Husain, Abdul Rashid; Abdul Aziz, Junaidi; Abbasi, M. Abbas; Alqaraghuli, Hasan // PLoS ONE;2/6/2020, Vol. 15 Issue 2, p1 

    For closed-loop controlled DC-AC inverter system, the performance is highly influenced by load variations and online current measurement. Any variation in the load will introduce unwanted periodic error at the inverter output voltage. In addition, when the current sensor is in faulty condition,...

  • Symmetric hybridised design for a novel step-up 19-level inverter. Barzegarkhoo, Reza; Zamiri, Elyas; Moradzadeh, Majid; Shadabi, Hamed // IET Power Electronics;2017, Vol. 10 Issue 11, p1377 

    Nowadays, reduction in number of dc voltage sources alongside boosting property of the output voltage with reduced circuit components are counted as the most important topological features for the new structures of multilevel voltage source inverters. Considering the above, this study presents a...

  • Field programmable gate array-based delta-modulated cycloinverter. Agarwal, A.; Agarwal, V. // IET Power Electronics;Nov2012, Vol. 5 Issue 9, p1793 

    A cycloinverter has been proposed to directly convert utility frequency AC, 50-Hz power to high-frequency AC power with delta pulse width modulation switching. Detailed design and simulation analysis is presented for single phase matrix converter (SPMC) topology with eight switches through...

  • Single-phase hybrid discontinuous conduction mode SEPIC rectifiers integrated with ladder-type switched-capacitor cells. de J. Kremes, William; Costa, Paulo J. S.; Font, Carlos H. Illa; Lazzarin, Telles B. // IET Power Electronics;2019, Vol. 12 Issue 11, p1 

    In this study, a set of new single-phase pulse-width modulation (PWM) Single-ended primary-inductor converter (SEPIC) rectifiers are proposed, which integrates conventional SEPIC rectifier, three-state switch (TSS) and switched-capacitor (SC) concepts. A conventional ladder-type SC cell is...

  • Two methods for controlling three-time fundamental frequency neutral-point voltage oscillation in a hybrid VIENNA rectifier. Wei-zhang Song; Zhi-hao Dai; Nan Xie; You-yun Wang; Wheeler, Pat // IET Power Electronics;2019, Vol. 12 Issue 4, p932 

    This study presents two methods of controlling neutral-point voltage oscillation in a hybrid VIENNA rectifier, which is composed of the parallel association of a three-phase single-switch Boost rectifier with a VIENNA-type rectifier. The neutralpoint oscillation reason has been analysed with a...

  • Carrier-based PWM control strategy for three-level indirect matrix converter. Rutian Wang; Zhefu Zhong; Jiawei Zhang; Weiquan Wang // IET Power Electronics;2019, Vol. 12 Issue 8, p1964 

    This article proposes a new carrier-based pulse width modulation (CBPWM) strategy for the control of TLIMC. The duty ratios of the rectifier stage and inverter stage are calculated by the SVPWM method. A carrier is constructed and combined with duty ratios to obtain modulation waves, which are...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics