TITLE

Evaluation of Capacitor Sensor Performancein Reinforced Concrete for Corrosion Monitoring

AUTHOR(S)
Rahman, Siti Fatimah Abdul; Ismail, Mohammad; Noor, Norhazilan Md.; Bakhtiar, Hazri; Yahaya, Nordin; Rashid, Ahmad Safuan A.
PUB. DATE
April 2013
SOURCE
Advances in Natural & Applied Sciences;Apr-Jun2013, Vol. 7 Issue 2, p179
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper, a capacitor sensor was developed with intention to detect and evaluate corrosion activity in reinforced concrete slab sample. The performance of capacitor sensor was evaluated to determine the workability of the sensor in detecting impedance pattern when embedded in concrete structure. The diameter of impedance pattern can give the polarization resistance which is useful to calculate corrosion rate for future development. This was done by detecting the impedance Nyquist plot of concretesample. The capacitor sensor was tied to the reinforcement bar and the sample was immersed in 3.5% NaCl solution for seven days. The result shows that the capacitor sensor is fully functional in detecting impedance pattern. Hence, demonstrates potential capability of the sensor in measuring corrosion activity in concrete.
ACCESSION #
90475655

 

Related Articles

  • A two-step method for the evaluation of corrosion rate in metals. Herasymenko, Yu. S.; Vasyl'ev, H. S. // Materials Science;Nov2009, Vol. 45 Issue 6, p899 

    We analyze the negative influence of the polarization capacity of corroding electrodes on the accuracy of evaluation of the corrosion rate. Due to the influence of deposits, the impedance of the electrode has an abnormally high capacity [(104 - 105) μF/cm2]. The difficulties encountered in...

  • Corrosion Inhibition by an Ion Pair Reagent-Zn2+ System. Anbarasi, C. Mary; Rajendran, Susai; Vijaya, N.; Manivannan, M.; Shanthi, T. // Open Corrosion Journal;2012, Vol. 5, p1 

    Inhibition of corrosion of carbon steel in dam water (Tamil Nadu, India) by Pentane sulphonicacid as its sodium salt (SPS)-Zinc ion system has been studied using weight-loss and potentiodynamic polarization methods. Results of weight loss method indicated that inhibition efficiency (IE)...

  • Corrosion Inhibition of Zn-Al-Cu Alloy by 2-Aminothiazole. Mazhar, A. A.; Salih, S. A.; Gad-Allah, A. G.; Tammam, R. H. // Journal of Materials Engineering & Performance;Apr2008, Vol. 17 Issue 2, p260 

    The inhibitive effect of 2-aminothiazole on corrosion of Zn-Al-Cu alloy was investigated in acid, neutral and alkaline media by impedance and polarization techniques. The impedance data were fitted to a simple equivalent circuit model and indicated control by a diffusion process. Satisfactory...

  • Transmission Line Modeling Applied to Hot Corrosion of Fe-40at.pctAl in Molten LiCl-KCl. Barraza-Fierro, Jesus; Espinosa-Medina, Marco; Castaneda, Homero // Metallurgical & Materials Transactions. Part B;Dec2015, Vol. 46 Issue 6, p2593 

    The effect of Cu and Li additions to the intermetallic alloy Fe-40at.pctAl on the corrosion performance in an LiCl-55wtpctKCl molten eutectic salt was studied by means of electrochemical impedance spectroscopy, transmission line modeling (TLM), and cathodic polarization. The tests were done at...

  • Measurement of Reinforcement Corrosion Rate Using Transient Galvanostatic Pulse Method. Hyoung-seok So; Millard, Stephen Geoffrey // ACI Materials Journal;Jul/Aug2008, Vol. 105 Issue 4, p350 

    The article discusses the corrosion of reinforcing steel, examining a transient galvanostatic pulse technique that can be used for measuring reinforcement corrosion. The authors also compare the aforementioned technique with the linear polarization resistance (LPR) method. Topics include...

  • Inhibition of Mild Steel Corrosion in 1M HCl Medium by Acid Extract of Haloxylon scoparium Pomel. Allaoui, M.; Cheriti, A.; Gherraf, N.; Chebouat, E.; Dadamoussa, B.; Salhi, R. // International Journal of Electrochemical Science;Jul2013, Vol. 8 Issue 7, p9429 

    The present work sheds some light on the inhibition effect of acidic extract of Haloxylon Scoparium pommel on the corrosion of steel (X52) in acid solution of hydrogen chloride (1M) using the electrochemical measurements (electrochemical polarization resistance, electrochemical impedance...

  • Accelerated Chloride Threshold Testing: Part I—ASTM A 615 and A 706 Reinforcement. Trejo, David; Pillai, Radhakrishna G. // ACI Materials Journal;Nov/Dec2003, Vol. 100 Issue 6, p519 

    Evaluates the critical chloride threshold of steel reinforcement in concrete. Life-cycle costs of reinforced concrete structures susceptible to corrosion; Effects of chemical admixtures on the corrosion rate of steel; Provision of information on critical chloride threshold values of steel...

  • Cutting Concrete Corrosion.  // DPC: Dredging & Port Construction;Dec2001, p9 

    Reports on the anti-corrosion technique used at the Devonport Royal Dockyard. Process which causes steel bar reinforced concrete to crack and spall; Description of the chemical admixture DC1 S; Application process of DC1 S to concrete.

  • Effect of Strength and Covering on Concrete Corrosion. Rashid, Muhammad Harunur; Khatun, Sobura; Uddin, Sk. M. Kamal; Nayeem, M. A. // European Journal of Scientific Research;Feb2010, Vol. 40 Issue 4, p492 

    The most affecting performance of reinforced concrete structures is the rebar corrosion. In this study accelerated constant current corrosion tests were performed on concrete cylinders to investigate the influence of concrete strength and covering on corrosion of concrete. The effect of...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics