TITLE

Investigation of Sintering in Electroceramics by Thermodilatometry

AUTHOR(S)
Trník, A.; Moravčíková, J.; Keppert, M.; Medved, I.
PUB. DATE
January 2013
SOURCE
Science of Sintering;2013, Vol. 45 Issue 1, p3
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Solid-state sintering was investigated in electroceramic samples using hermodilatometric measurements. The samples were studied in the isothermal regime at the temperatures 500, 600, 700, 800, 900, 1000 and 1050 °C. The relative expansion was measured for a period of 8 h. At a given temperature a dominant diffusion mechanism for the sintering process was determined, and the corresponding porosity together with the pore size distribution was also measured.
ACCESSION #
90474666

 

Related Articles

  • Pore Size Estimation of Mesoporous Materials through Surfactant Self-Assembly Prediction. Xu, Chengzhi; Chen, Xiaohui; Wei, Kemei // Zeitschrift für Physikalische Chemie;Aug2014, Vol. 228 Issue 8, p829 

    A theoretical model for pore size estimation of mesoporous materials was presented in this paper. It is based on the statistical thermodynamic model of micelle formation proposed by R. Nagarajan. The proposed model was applied to predict the pore size of MSU-X molecular sieve prepared in...

  • Strategies to Improve Pore-size Distribution Characterization of Activated Carbons using CO2 and N2 Isotherms: Volume Regularization and Etched Slit Models. Silvino, P. F. G.; Gonçalves, D. V.; Gonçalves, R. V.; de Lucena, S. M. P.; Azevedo, D. C. S. // Adsorption Science & Technology;2013, Vol. 31 Issue 2/3, p263 

    The pore-size distribution (PSD) of an activated carbon (AC) sample, which is obtained by molecular simulation using a specific probe gas, does not always reproduce the adsorptive behaviour of that sample with other gases. Moreover, different gases generate distinct distributions for the same...

  • Porous Clay Ceramic for Environmental Technologies. Svinka, Ruta; Svinka, Visvaldis; Dabare, Liga; Lescinskis, Oskars // Advances in Science & Technology;2014, Vol. 91, p88 

    In the present work porous clay ceramic pellets (porosity ≤ 30 %) are investigated for the wastewater purification technologies. Calcareous and non-calcareous illite containing clays with different content of fine clay fraction (particle size ≤ 0.005 mm) are used. Sawdust in amount...

  • POROUS COPPER SHEETS DIAGNOSTIC METHODS. SIMA, C. M.; CIUPINA, V. // Digest Journal of Nanomaterials & Biostructures (DJNB);Oct-Dec2016, Vol. 11 Issue 4, p1035 

    Porous copper based materials have excellent conductive and mechanical properties which make them suitable in many applications. In this paper were obtained several porous copper sheets using sintering method in a controlled atmosphere. In order to study copper's final plate porosity, pore size...

  • A COMPREHENSIVE ANALYSIS OF CONSUMER PROPERTIES OF NUTRIA VELOUR HYDROPHOBICIZED WITH ALKENMALEINACRYLSYNTANE COMPOSITION. Danylkovych, A.; Khliebnikova, N. // Eastern-European Journal of Enterprise Technologies;2019, Vol. 99 Issue 6, p31 

    No abstract available.

  • Predicting Strain Resistance of Nonwovens by Morphological Analysis of Structural Links Between Fibres and Their Pore Size. Makarov, A. A.; Mantsevich, A. Yu.; Ganyavin, V. A. // Fibre Chemistry;May2019, Vol. 51 Issue 1, p41 

    A method is developed for physicomechanical investigations in surface layer where the nonwoven material is strained under free and constrained performance conditions. The mechanism of nondestructive control of points of fixation of polyester fibres to the melt is proposed and validated and the...

  • Thermal properties of La[sub 0.5]Sr[sub 0.5]Co[sub 1-x]Ni[sub x]O[sub 3-δ] ceramics using photopyroelectric technique. Sebastian, M. T.; Preethy Menon, C.; Philip, J.; Schwartz, R. W. // Journal of Applied Physics;9/1/2003, Vol. 94 Issue 5, p3206 

    La[sub 0.5]Sr[sub 0.5]Co[sub 1-x]Ni[sub x]O[sub 3-δ] (0≤x≤0.6) ceramics were prepared using a conventional solid-state ceramic route. The thermal properties—thermal conductivity and heat capacity—of these ceramics were measured by the photopyroelectric technique. The...

  • Hot To... Choose the Right DSC Method. Menard, Kevin // Laboratory Equipment;Jun2013, Vol. 50 Issue 2, p22 

    The article offers information on various methods to considering in using differential scanning calorimetry (DSC), which is used in studying material properties such as melting point, and glass transition. It says that DSC can be applied in four types of experiments including cooling isothermal,...

  • Modelling Method for Preventing Thermal Runaway Reaction Accident of Thermal Reactive Material. I-Tien Chu; Shu-Yao Tsai; Wan-Tran Huang; Jo-Ming Tseng; Jin-Shuh Li; Chun-Ping Lin // Advanced Materials Research;2014, Vol. 936, p2030 

    Thermally reactive materials have caused many serious accidents involving storage and transportation, due to being thermally reactive. The safe storage and management of these materials still is a critical problem in many countries. We studied the thermal hazard of thermal reactive materials,...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics