TITLE

Enhanced electroluminescence from light-emitting devices based on poly(9,9-dihexadecylfluorene-2,7-diyl) and polysilane blends

AUTHOR(S)
Cimrová, Veˇra; Výprachtický, Drahomır
PUB. DATE
January 2003
SOURCE
Applied Physics Letters;1/27/2003, Vol. 82 Issue 4, p642
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Photoluminescence and electroluminescence (EL) of poly(9,9-dihexadecylfluorene-2,7-diyl) (PFC 16) and its blends with hole-transporting poly[methyl(phenyl)silanediyl] modified with pyrene were studied. Efficient blue light-emitting devices were fabricated. Blending of PFC16 with modified polysilane led to a significant improvement in the EL efficiency and stability compared with the devices fabricated from neat PFC 16. An increase in the EL efficiency of up to two orders of magnitude was achieved. The increase in the EL efficiency was attributed to the modification of the charge transport and recombination in the blend.
ACCESSION #
8954551

 

Related Articles

  • Polymer gel light-emitting devices. Shun-Chi Chang; Yang Yang // Applied Physics Letters;11/1/1999, Vol. 75 Issue 18, p2713 

    Reports on the generation of luminescence from a polymer gel in a compact cell configuration. Device structure of the gel light-emitting device (GLED); Consistency of the emission spectrum with the photoluminescence spectrum obtained from the polymer gel.

  • Recombination profiles in poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] light-emitting electrochemical cells. Leger, J. M.; Carter, S. A.; Ruhstaller, B. // Journal of Applied Physics;12/15/2005, Vol. 98 Issue 12, p124907 

    We present a study on the optical and electronic properties of light-emitting electrochemical cells (LECs) based on poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) with the goal of understanding emission profiles and characterizing salt and electrode dependence. Direct...

  • Improved light outcoupling for phosphorescent top-emitting organic light-emitting devices. Chen, Shufen; Yi Zhao; Gang Cheng; Jiang Li; Chunli Liu; Zhenyuan Zhao; Zhonghai Jie; Shiyong Liu // Applied Physics Letters;4/10/2006, Vol. 88 Issue 15, p153517 

    Light outcoupling for top-emitting organic light-emitting devices is improved by using a semitransparent multilayer cathode structure of Al(2.5 nm)/Ag(0.5 nm)/Al(1 nm)/Ag(0.5 nm)/Al(0.5 nm)/Ag(11 nm). In addition, an excellent transparency of 70% is achieved with a 78-nm-thick...

  • Materials science: Lilliputian light sticks. Fardy, Melissa; Yang, Peidong // Nature;1/24/2008, Vol. 451 Issue 7177, p408 

    The article probes on the efficiency of 5,6,11,12 tetraphenyltetracene (Rubrene) and 1,3,5-triphenyl-2-pyrazoline (TPP), organic molecules use to create white-light-emitting composite nanocrystals. It discusses the process on how Rubrene and TPP were incorporated to produce a cost efficient rod...

  • Visible electroluminescent subwavelength point source of light. Kuck, Nily; Lieberman, Kiony // Applied Physics Letters;7/13/1992, Vol. 61 Issue 2, p139 

    Presents a visible electroluminescent subwavelength point source of light. Utilization of a standard direct current electroluminescent powder in the construction of the light source; Application of the device for near-field microscopy; Emissions of the microsources throughout the visible region...

  • Response to "Comment on 'Organic electroluminescent devices by high-temperature processing and crystalline hole transporting layer ' " [Appl. Phys. Lett. 77, 3113 (2000)]. Gao, Z. Q.; Gao, Z.Q.; Lai, W. Y.; Lai, W.Y.; Wong, T. C.; Wong, T.C.; Lee, C. S.; Lee, C.S.; Bello, I.; Lee, S. T.; Lee, S.T. // Applied Physics Letters;11/6/2000, Vol. 77 Issue 19 

    Emphasizes the finding that high temperature deposition can improve the performance of organic light-emitting devices (OLED), in response to comments on the article 'Organic electroluminescent devices by high-temperature processing and crystalline hole transporting layer,' by Qin et al.

  • Two-dimensional surface band structure of operating light emitting devices. Shikler, R.; Meoded, T. // Journal of Applied Physics;7/1/1999, Vol. 86 Issue 1, p107 

    Presents a study on the measurements of two-dimensional potential distribution with nanometer spatial resolution of operating light emitting diodes using Kelvin force microscopy. Theory underlying the contact potential difference measurement; Experimental setup; Results and discussion; Summary.

  • Enhanced luminescence of Y3Al5O12:Ce3+ nanophosphor for white light-emitting diodes. Haranath, D.; Chander, Harish; Sharma, Pooja; Singh, Sukhvir // Applied Physics Letters;10/23/2006, Vol. 89 Issue 17, p173118 

    Results pertaining to the development of highly dispersible stand-alone particles of Ce3+-doped Y3Al5O12 nanophosphor and their luminescence are presented. The yellow light-emitting nanophosphor was produced as a result of a single-step auto-combustion process, which requires no auxiliary...

  • Synthesis of novel coumarin-terminated poly (p-phenylene vinylene)s for application in LEDs. Yan Huang; Zhi-Yun Lu; Qiang Peng; Ru-Gang Xie; Ming-Gui Xie; Jun-Biao Peng; Yong Cao // Journal of Materials Science;Feb2005, Vol. 40 Issue 3, p601 

    Novel coumarin-terminated poly (p-phenylene vinylene)s were synthesized successfullyviaGilch methodology. The resulting coumarin end-capped poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene (CT-MEH-PPV) film gives yellow photoluminesence with a maximum intensity at 560 nm, which is...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics