TITLE

Determination of Residual Stresses Numerically Obtained in ASTM AH36 Steel Welded by TIG Process

AUTHOR(S)
Guimarães, Pablo Batista; Almeida Pedrosa, Paulo Marcelo; Prasad Yadava, Yogendra; Andrade Barbosa, José Maria; Siqueira Filho, Aníbal Veras; Sanguinetti Ferreira, Ricardo Artur
PUB. DATE
April 2013
SOURCE
Materials Sciences & Applications;Apr2013, Vol. 4 Issue 4, p268
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Residual stresses have been numerically determined in welded joints. In this study, the numerical model is based on the coupling of different physical phenomena considering the thermal, mechanical and metallurgical nature of a welding process. The ABAQUS software program was used to perform the numerical simulations, based on the finite element method (FEM). The aspects related to the mathematical modeling of complex welding procedures were pondered with the FEM: variations in the physical and mechanical properties of the materials as a function of the temperature; the transience and the speed of the welding process, the material phase transformations; the different mechanisms of heat exchange with the environment (convection and radiation); all them associated with a high level of nonlinearity. The heat source used in this analytical model for heat supply was the double ellipsoid model proposed by Goldak, in which a 60 mm x 50 mm and 3 mm rectangular ASTM AH36 steel plate was used for the TIG process simulations. Throughout this work, the optimization of the welding procedures currently practiced in petrochemical and ship building industries can be applied to reduce the levels of residual stresses.
ACCESSION #
89252770

 

Related Articles

  • Residual stress relief due to fatigue in tetragonal lead zirconate titanate ceramics. Hall, D. A.; Mori, T.; Comyn, T. P.; Ringgaard, E.; Wright, J. P. // Journal of Applied Physics;Jul2013, Vol. 114 Issue 2, p024103 

    High energy synchrotron XRD was employed to determine the lattice strain [variant_greek_epsilon]{111} and diffraction peak intensity ratio R{200} in tetragonal PZT ceramics, both in the virgin poled state and after a bipolar fatigue experiment. It was shown that the occurrence of microstructural...

  • Research on fatigue damage of sucker rod based on damage mechanics. Rui-fen Zhou; Ming-xi Feng; Min-zheng Jiang; Kang-xing Dong // Journal of Chemical & Pharmaceutical Research;2014, Vol. 6 Issue 7, p1394 

    Fatigue failure of sucker rod can occur under the effect of alternating load, and results in failure of sucker rod. In this paper, the damage mechanics theory is applied to the fatigue damage of sucker rod on the study, establish the fatigue damage evolution equation of sucker rod, and the...

  • A Validated Numerical Model for Residual Stress Predictions in an Eight-Pass-Welded Stainless Steel Plate. Patel, V. I.; Muránsky, O.; Hamelin, C. J.; Olson, M. D.; Hill, M. R.; Edwards, L. // Materials Science Forum;2014, Vol. 777, p46 

    Welding processes create a complex transient state of temperature that results in post-weld residual stresses. The current work presents a finite element (FE) analysis of the residual stress distribution in an eight-pass slot weld, conducted using a 316L austenitic stainless steel plate with...

  • Measurement of Residual Stresses in Titanium Aerospace Components Formed via Additive Manufacturing. Hoye, Nicholas; Huijun Li; Cuiuri, Dominic; Paradowska, Anna // Materials Science Forum;2014, Vol. 777, p124 

    In the present study gas tungsten arc welding (GTAW) with automated wire addition was used to additively manufacture (AM) a representative thin-walled aerospace component from Ti-6Al-4V in a layer-wise manner. Residual strains, and hence stresses, were analysed quantitatively using neutron...

  • Cyclic Shear-Friction Constitutive Model for Finite Element Analysis of Reinforced Concrete Membrane Elements. Chorzepa, Migeum; Yoo Jae Kim; Gun Jin Yun; Harmon, Thomas G.; Dyke, Shirley // ACI Structural Journal;May/Jun2011, Vol. 108 Issue 3, p324 

    This paper develops a shear-friction membrane model that is able to limit the shear strength of concrete crack surfaces according to the shear-friction theory so that concrete can fail in shear. The proposed shear-friction model is developed for membrane elements with one-directional cracks and...

  • INFLUENCE OF MODELLING ON TRUSS STRESS ANALYSIS RESULTS. Šimić, Diana; Ilijaš, Tanja // Transactions of FAMENA;2012, Vol. 36 Issue 4, p73 

    In order to determine the real state of stress in a reinforced concrete truss and to determine the impact of restraint rods in the truss nodes on the stress in the beam, a theoretical and an experimental analysis of stress in reinforced concrete truss were conducted. The analytical modelling is...

  • ANALYSIS OF STRESS AND STRAIN IN THE REINFORCED CONCRETE STRUCTURE OF A SPORTS HALL GRANSTAND. Šimić, Diana; Frančić, Marina // e-GFOS;Jun2013, Issue 6, p81 

    The analysis of stress and strain in the reinforced concrete structure of a sports hall grandstand was conducted theoretically, by means of the finite element method, and experimentally, by structural model testing in laboratory. Structural model for laboratory testing was prepared on the scale...

  • CONSIDERATIONS ON THE STRESSES CONCENTRATION FACTOR. MARCU, FRATILA // Journal of Engineering Studies & Research;2012, Vol. 18 Issue 4, p47 

    The paper analyzes stresses in an area of tension-type with geometric discontinuity concentrator. The geometric discontinuity is a hole located in a thin plate of finite dimension. The stresses and their variations were determined using the finite element method (FEM). Stresses values obtained...

  • Novel Design of Lower Arm Vehicle Using Finite Element Analysis and Statistical Method. M., Hemin M.; M., Rahman M.; M., Omar R. // Journal of Advanced Science & Engineering Research;2012, Vol. 2 Issue 1, p27 

    The aim of this study is to investigate the influencing factors of the Lower suspension arm by integrating the finite element technique with response surface methodology (RSM). Response surface methodology has been widely used to predict Stress von Mises on Lower arm systems models. Aluminum...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics