January 2003
Circuits Assembly;Jan2003, Vol. 14 Issue 1, p45
Trade Publication
Introduces several electronic apparatus and appliances. Master Bond EP72M3, a two component elastomer modified epoxy adhesive from Master Bond Inc.; IR-X400, a hand-free, semi-automatic rework system from PDR Engineer Inc.; WQB3000 repair system from Weller.


Related Articles

  • No Cleaning Required? Hymes, Les // Circuits Assembly;Feb2003, Vol. 14 Issue 2, p20 

    Focuses on requirements of a no-clean assembly process for soldering of an electronic appliances. Factors reducing the performance and reliability of the product; Steps to be taken while soldering the product; Compatibility between fluxes in solder paste and cored wire.

  • In Case You Missed It.  // Circuits Assembly;Jan2008, Vol. 19 Issue 1, p48 

    The article presents abstracts on topics about electronics circuits which include a robust flip-chip solution for device-packaging companies using a gold-to-gold interconnect process, a research on tin-lead and lead-free soldering, and guidelines for selecting printed circuit board suppliers.

  • Pb-free Design and Process Optimization for PIH. Fockenberger, Harald; Ho, Terence; Pfennich, Gerhard; Shangguan, Dongkai; Leow Ching Tat // Advanced Packaging;Oct2005, Vol. 14 Issue 10, p32 

    Examines the results of the board design and process optimization for paste-in-hole (PIH) using lead-free solder in the U.S. in 2005. Relationship between several design and process variables and PIH solder joint quality; Analysis of pertinent topics and relevant issues; Implications for...

  • Effects of solder joint structure and shape on thermal reliability of plastic ball grid array package. Chen, R.S.; Tseng, S.C.; Wan, C.S. // International Journal of Advanced Manufacturing Technology;Jan2006, Vol. 27 Issue 7/8, p677 

    Among the PBGA (plastic ball grid array) packages, a 72-I/O OMPAC (overmolded effect array carrier) package is studied during thermal cycling. The ANSYS software is applied to analyze the effects of some factors on the solder joint for the fatigue life due to elastoplastic deformation of the...

  • Effects of Limited Cu Supply on Soldering Reactions Between SnAgCu and Ni. Ho, C. E.; Lin, Y. W.; Yang, S. C.; Kao, C. R.; Jiang, D. S. // Journal of Electronic Materials;May2006, Vol. 35 Issue 5, p1017 

    The volume difference between the various types of solder joints in electronic devices can be enormous. For example, the volume difference between a 760-µm ball grid array solder joint and a 75-µm flip-chip solder joint is as high as 1000 times. Such a big difference in volume produces a...

  • Development and characterization of Sn-1.3Ag-0.7Cu solder bearing Zn for electronic packaging. El-Daly, A.; Radwan, N.; Abo El-Eizz, H.; Hamza, B. // Journal of Materials Science: Materials in Electronics;Nov2015, Vol. 26 Issue 11, p8807 

    The effect of small amounts of Zn on microstructure, thermal behavior and mechanical properties of low silver-content Sn-1.3Ag-0.7Cu (SAC137) solder was investigated. Microstructural investigations of SAC137 solder revealed that both the intermetallic compounds of rod-like CuSn and needle-like...

  • Reliability Effects of Unfilled Underfill Encapsulants. Loh, Karl; Ibe, Edward // SMT: Surface Mount Technology;Feb2005, Vol. 19 Issue 2, p46 

    Examines the effect of an unfilled underfill encapsulant on board-level reliability of area array package. Advancement in the use of undefill encapsulant towards the encapsulation of surface mount components; Solder joint reliability against mechanical shock; Improvement in thermal cycle...

  • Fanout Patterns, Part 1. Pfeil, Charles // Printed Circuit Design & Manufacture;Mar2008, Vol. 25 Issue 3, p48 

    The article deals with fanout patterns. The effectiveness of a fanout pattern on several large BGA contributes to the route-ability of a design. The BGA fanout is only a part of the routing solution, which may also include escape traces and general interconnect routing of the pins. The goal of...

  • Preventing Voids in CSP and BGA Underfill Encapsulants. Loh, Karl; Ibe, Edward // Circuits Assembly;Oct2004, Vol. 15 Issue 10, p42 

    The article reports on preventing voids in CSP and BGA underfill encapsulants. CSPs and EGAs are capable of surviving thermal cycling requirements without being encapsulated, but are not designed to withstand repeated mechanical shock. Yet handheld devices must survive drop testing. For CSP and...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics