TITLE

FORECASTING OF OPTIMUM TURNING PARAMETER ON SURFACE ROUGHNESS IN TURNING OF AL-AL2O3 METAL MATRIX COMPOSITE

AUTHOR(S)
SINGH, YASHVIR; SINGH, NISHANT KUMAR; SINGLA, AMNEESH; LOHANI, NITIN
PUB. DATE
February 2013
SOURCE
International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p267
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The objective of this research work is to apply taguchi method to investigate the effects of turning parameters such as cutting speed, depth of cut and feed rate on surface roughness, in Turning of Al-Al2O3 MMC using TiC coated HSS cutting tool. The Signal-to- Noise (S/N) ratio, the analysis of variance (ANOVA), and regression analysis are used to analyze the effect of drilling parameters on the quality characteristic of machined work piece. A series of experiments are performed based on L9 orthogonal array. The experimental results obtained are analyzed using MINITAB software package. Linear regression equations are used to develop a statistical model with an objective to establish a correlation between the selected drilling parameters with the quality characteristics of the machined work piece.
ACCESSION #
88917800

 

Related Articles

  • A comparison of the different multiple response optimization techniques for turning operation of AISI O1 tool steel. KATARIA, RAVINDER; KUMAR, JATINDER // Journal of Engineering Research (2307-1877);Dec2014, Vol. 2 Issue 4, p161 

    In this article, the effect of several process parameters such as tool nose radius, speed, feed and depth of cut on the machining performance of turning operation has been studied using AISI O1 tool steel as a work material. The machining characteristics that are being studied are material...

  • Combustion and Emission Based Optimization of Turbocharged Diesel Engine Run on Biodiesel using Grey-Taguchi Method. Masood, M. I.; Shah, A. N.; Aslam, A.; Gul, M.; Naveed, A.; Usman, M. // Technical Journal of University of Engineering & Technology Taxi;2015, Vol. 20 Issue 3, p80 

    in this work it is attempted to optimize the combustion parameters such as instantaneous heat release (IH), cylinder Pressure (P) and rate of change of pressure per degree crank angle (dP/do)) and the emissions characteristics such as NOx and Smoke of a turbocharged direct injection (DI)...

  • Optimization of the HOVF Spray Parameters by Taguchi Method for High Corrosion-Resistant Fe-Based Coatings. Qin, Yujiao; Wu, Yuping; Zhang, Jianfeng; Hong, Sheng; Guo, Wenmin; Chen, Liyan; Liu, Hao // Journal of Materials Engineering & Performance;Jul2015, Vol. 24 Issue 7, p2637 

    Taguchi method was used to optimize the parameters of the high velocity oxygen fuel (HVOF) spray process and obtain the high corrosion-resistant Fe-based coatings. Based on the signal-to-noise ( S/ N) ratio and the analysis of variance, the significance of spray parameters in determining the...

  • ANALYSIS OF SURFACE ROUGHNESS IN HARD TURNING BY USING TAGUCHI METHOD. SALVI, S. B.; DESHMUKH, R. R.; DESHMUKH, S. D. // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p365 

    Hard turning is defined as the turning of hardened ferrous metals with Rockwell-C hardness ratings ranging from 45 to 70. Hard turning has the potential to reduce production costs by replacing more costly and less agile grinding operations on hard materials especially in finishing processes...

  • MACHINING PARAMETERS OPTIMISATION FOR MILLING AISI 304 STAINLESS STEEL USING TAGUCHI METHOD. NARESH, N.; RAJASEKHAR, K. // Journal on Mechanical Engineering;2014, Vol. 4 Issue 1, p28 

    AISI 304 stainless steel has wide applications in fabrication, architectural panelling, paper industry, food and pharmaceutical production equipment, nuclear vessels and cryogenic vessels. Austenitic steels are hard materials to machine, due to their high strength, high ductility, low thermal...

  • Investigation of Parameters Affecting Surface Roughness in CNC Routing Operation on Wooden EGP. Sütçü, Abdullah // BioResources;2013, Vol. 8 Issue 1, p795 

    The aim of this study was to evaluate the effect of CNC routing, using different parameters with the Taguchi experimental design, on the surface quality of various wooden (pine, spruce, and beech) edge-glued panels (EGP). The study evaluated five processing parameters: cutting direction, cutting...

  • EXPERIMENTAL INVESTIGATION ABOUT INFLUENCES OF PROCESSING PARAMETERS IN PLASTIC EXTRUSION PROCESS. WOLDEAREGAY, SISAY G.; KASSIE, ACHAMYELEH A.; NARASIMHA, M.; KUMAR, R. REJI // International Journal of Research in Computer Application & Mana;Jun2013, Vol. 3 Issue 6, p121 

    The objective of this paper is to find the root causes for nonconformity occurrences in plastic extrusion process. Data has been taken on the main causes for products defect and studied the relative contribution of plastic extrusion process parameters. To achieve this four sample products were...

  • AISI 316Ti PASLANMAZ ÇELİĞİN TORNALANMASINDA KESÄ°CÄ° UÇ ETKÄ°SÄ°NÄ°N TAGUCHI YÖNTEMÄ° Ä°LE ANALÄ°ZÄ°. KAYIR, Yunus; ASLAN, Sıddık; AYTÜRK, Ahmet // Journal of the Faculty of Engineering & Architecture of Gazi Uni;Jun2013, Vol. 28 Issue 2, p363 

    In this study, A Taguchi model were designed for turning AISI 316 Ti stainless steel. Experimental works were made on the conventional machine tools. Cutting tools that were manufactured with different edge geometries and coated with TiCN-Al203-TiN were used in the experimental works. Effects of...

  • Study the Surface Characteristics of Cryogenically Treated Tool-Electrodes in Powder Mixed Electric Discharge Machining Process. Kumar, Sanjeev; Singh, Rupinder; Batish, Ajay; Singh, T. P. // Materials Science Forum;2014, Vol. 808, p19 

    The present experimental study has been focused to evaluate surface characteristics of cryogenically-treated (shallow/deep) tool-electrodes using powder mixed electric discharge machining. Due to the continuously growing demand of complex and precise parts, tool-electrodes have its own...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics