TITLE

Computer Modelling of a Vehicle System

AUTHOR(S)
Prem Jeya Kumar, M.; Sandeep Anand, J.; Gopalakrishnan, K.; Satheesh, B.; Anbazhagan, R.
PUB. DATE
May 2013
SOURCE
Indian Journal of Science & Technology;May2013, Vol. 6 Issue 5 Supp., p4620
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The purpose of computer modeling of a vehicle system is to develop basic methods for computer formulation and solution of the equations of motion. This requires systematic techniques for formulating the equations and numerical methods for solving them. The computer program developed here for the analysis of vehicle system dynamics is a special purpose program. It deals with only a specific type of application say lateral stability or dynamic response. The equations of motion for that particular application are derived a priori and then formulated into the program. As input to the program, the various data's like, mass of the entire vehicle, sprung mass, unstrung mass etc., the initial values of parameters of a vehicle system have been provided. Such a special purpose program can be made computationally efficient and its storage requirement can be minimized with the result that it will be suitable for implementation on small personal computers.
ACCESSION #
87991869

 

Related Articles

  • About computer modeling of technical systems in the environment of Free Pascal. Maier, R. V. // Perspectives of Science & Education;2014, Vol. 7 Issue 1, p84 

    The problem of use of computer models when studying various technical devices and learning of bases of computer simulation is considered. The special attention is paid to creation of mathematical model and transition from system of the differential equations to the computer program. The model of...

  • A Prolog Simulator for Deterministic P Systems with Active Membranes. Cord�n-Franco, Andr�s; Guti�rrez-Naranjo, Miguel A.; P�rez-Jim�nez, mario J.; Sancho-Caparrini, Fernando // New Generation Computing;2004, Vol. 22 Issue 4, p349 

    In this paper we propose a new way to represent P systems with active membranes based on Logic Programming techniques. This representation allows us to express the set of rules and the configuration of the P system in each step of the evolution as literals of an appropriate language of first...

  • Analysis and Fault Modeling of Actual Resistive Defects in ATMEL [InlineMediaObject not available: see fulltext.] eFlash Memories. Mauroux, P.-D.; Virazel, A.; Bosio, A.; Dilillo, L.; Girard, P.; Pravossoudovitch, S.; Godard, B.; Festes, G.; Vachez, L. // Journal of Electronic Testing;Apr2012, Vol. 28 Issue 2, p215 

    The embedded Flash (eFlash) technology can be subject to defects creating functional faults. In this paper, we first generalize the electrical model of the ATMEL TSTACâ„¢ eFlash memory technology proposed in []. The model is composed of two layers: a functional layer representing the...

  • Implementations of PID Controller and its Transient Behaviour in Active Suspension System. Amer, Noor H.; Ramli, Rahizar; Wan Mahadi, Wan Nor Liza; Zainul Abidin, Mohd. Azman; Rasol, Zainab // Advanced Materials Research;2014, Issue 895, p490 

    Advancement in computational technologies has accelerated the research effort in exploring the possibility of semi-active and active suspension. Computational simulations were used widely in the studies of the controller strategies. Among them are PID controllers. Studies from previous work...

  • Add Robocopy to Your Toolbelt.  // Windows IT Pro;Sep2005, Vol. 11 Issue 9, p82 

    Introduces the Robust Copy Utility, a copy utility which handles copy operations involving huge chunks of data and makes certain specifications that other copy utilities, such as Copy and Xcopy. Command-line copy of Robocopy; Networks associated with the copy utility; Advantages of Robocopy...

  • Mathematical model of moving collectives interaction: Public transport and passengers. Regirer, S.; Smirnov, N.; Chenchik, A. // Automation & Remote Control;Jul2007, Vol. 68 Issue 7, p1225 

    In this paper, development of the model of collective interaction in the system “buses-passengers” represented in [1] is discussed. The point is that route busing depends on the travel time and alighting at bus stops; these times depend on boarding and passengers crowding at bus...

  • Effective Fault Diagnosis Approaches for Multipath Networks. Po-Jen Chuang; Huey-Ming Hsu // Computer Journal;Jul1999, Vol. 42 Issue 5, p409 

    Fault diagnosis is important for the immediate elimination of faults in a network. Over the years the diagnosis of faults for a single path network is frequently reported but that for a multipath network remains relatively unattended. The goal of this research is to detect faults in the gamma...

  • Open SystemC Simulator with Support for Power Gating Design. Silveira, George Sobral; Brito, Alisson V.; de A. Oliveira, Helder F.; Melcher, Elmar U. K. // International Journal of Reconfigurable Computing;2012, p1 

    Power gating is one of the most efficient power consumption reduction techniques. However, when applied in several different parts of a complex design, functional verification becomes a challenge. Lately, the verification process of this technique has been executed in a Register-Transfer Level...

  • Comparative Analysis of Conventional, P, PI, PID and Fuzzy Logic Controllers for the Efficient Control of Concentration in CSTR. Aslam, Farhad; Kaur, Gagandeep // International Journal of Computer Applications;Mar2011, Vol. 17, p12 

    All the industrial process applications require solutions of a specific chemical strength of the chemicals or fluids considered for analysis. Such specific concentrations are achieved by mixing a full strength solution with water in the desired proportions. In this paper the control the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics