TITLE

Coupled numerical simulation of hot stamping process and experimental verification

AUTHOR(S)
Li, Ye; Ying, Liang; Hu, Ping; Shi, Dongyong; Zhao, Xi; Dai, Minghua
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p471
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Hot stamping process is a high non-linear process showing the effect on thermal, mechanical and metallurgical phenomena as they relate to each other. In order to carry out this coupled numerical simulation, fundamental thermal properties such as interfacial heat transfer coefficient and convection heat transfer coefficient as well as crucial mechanics properties were first investigated. Hot stamping tools with cooling system which has been optimized by genetic algorithm were employed in the simulation. The coupled numerical simulation to the whole hot stamping process was built with the ABAQUS/Explicit and FLUENT. Experiment was setup and the results of blank temperature and spring-back were compared with the results of coupled numerical simulation. The comparisons show that the simulation results of numerical model are consistent with experimental results.
ACCESSION #
87656133

 

Related Articles

  • Analysis on Factors Influencing and Numerical Simulation of Hot Stamping Mold Cooling System. Hong-Mei Yang // Applied Mechanics & Materials;2014, Issue 644-650, p16 

    Cooling system is an important component of hot stamping dies, directly affects the quality and performance of the product. This article studies the work of hot stamping die process variation in temperature and heat transfer methods, analyzes the main factors affecting the cooling effect, and...

  • Analysis on Factors Influencing and Numerical Simulation of Hot Stamping Mold Cooling System. Hong-Mei Yang // Applied Mechanics & Materials;2014, Issue 644-650, p16 

    Cooling system is an important component of hot stamping dies, directly affects the quality and performance of the product. This article studies the work of hot stamping die process variation in temperature and heat transfer methods, analyzes the main factors affecting the cooling effect, and...

  • A heat source model for cold metal transfer (CMT) welding. Azar, Amin // Journal of Thermal Analysis & Calorimetry;Nov2015, Vol. 122 Issue 2, p741 

    A heat source model is proposed to simulate the effect of periodic and recurrent arcing and metal deposition phenomena in the cold metal transfer type of welding. This model will facilitate studying of weld pool behavior and resultant mechanical properties in detail for this type of welding. The...

  • A Comparative Study on the Fire Resistance of Ordinary Grade Structural Steels. In-Kyu Kwon // Advanced Materials Research;2014, Issue 904, p228 

    Fire resistance of structural elements such as columns and beams has been evaluated by the fire test. However, needs of fire design based on analysis using a heat transfer theory and a stress analysis are increasing because the design can reduce not only the period of the fire test but the cost...

  • Genetic algorithm-based optimal design of plate fins following minimum entropy generation considerations. Jha, R. K.; Chakraborty, S. // Proceedings of the Institution of Mechanical Engineers -- Part C;Aug2005, Vol. 219 Issue 8, p757 

    This paper deals with estimation of the optimal dimensions of arrays of plate fins cooled by forced convection. The optimization is achieved by minimizing the entropy generation rate using genetic algorithm-based evolutionary computing techniques. Results are presented for staggered plate fins...

  • Numerical Simulation of Forced Heat Convection Turbulent Magnetic Nanofluid Flow in a Square Channel. Che Sidik, NOR AZWADI; Jafni, HUSNAN // Applied Mechanics & Materials;2014, Issue 695, p363 

    This paper presents numerical study of turbulent nanofluid (Fe3O4-water) flow in a square straight channel. An ANSYS FLUENT commercial software was employed to investigate the flow and thermal characteristic of the flow in the range of Reynolds number 10,000 to 50,000 and nanoparticle volume...

  • Coupled of thermal-mechanical-transformation numerical simulation on hot stamping with static explicit algorithm. Hu, P.; Shi, D. Y.; Ying, L.; Shen, G. Z.; Chang, Y.; Liu, W. Q. // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p394 

    Thermal-mechanical-transformation coupled theoretical model for hot stamping and rheological behavior of high strength steel at elevated temperatures were obtained through non-isothermal and isothermal tensile tests respectively in this work. The static explicit finite element equations for hot...

  • Analytic Methods for the Calculation of the Heat Transfer Coefficient. Merklein, M.; Wieland, M.; Stoehr, T.; Lechler, J.; Gruener, M. // International Review of Mechanical Engineering;Feb2010, Vol. 4 Issue 2, p208 

    In the product development cycle numerical simulations are commonly used for the process layout. In case of hot stamping the process layout gets quite complex because material's thermal and mechanical properties have to be taken into account. Hot stamping can be explained as forming and...

  • Numerical Analysis of Hot Stamping Mold Cooling System Based on FLUENT. Yan Li-Jing // Applied Mechanics & Materials;2014, Vol. 713-715, p259 

    Cooling is very important in the process of hot stamping process of a link, directly affect the mechanical properties and service life of the forming parts. Mold cooling system is effective and reasonable, therefore, is the important indicators of the hot stamping process performance. This paper...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics