TITLE

Preface: NUMIFORM2013

AUTHOR(S)
Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p1
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
87656080

 

Related Articles

  • A Mandrel Feeding Strategy in Conical Ring Rolling Process. Wen Meng; Guoqun Zhao; Yanjin Guan // Mathematical Problems in Engineering;2014, p1 

    A mathematical model for radial conical ring rolling with a closed die structure on the top and bottom of driven roll, simplified as RCRRCDS, was established. The plastic penetration and biting-in conditions in RCRRCDS process were determined. A mandrel feeding strategy for RCRRCDS process was...

  • Secondary development of finite element simulation program and experimental verification of multi-step continuous forging. Xia, Qinxiang; Xiang, Ke; Zhu, Ningyuan; Song, Asheng // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p452 

    For long-shaft heavy forgings, multiple forging passes and several blows per pass are involved, the forging billet is fed at a certain distance after per blow and is rotated a certain angle after per pass, so the forging process is very time-consuming. The numerical simulation has become one...

  • CONCURRENT ENGINEERING BASED ON VIRTUAL MANUFACTURING. Mandić, Vesna; Erić, Dragan; Adamović, Dragan; Janjić, Mileta; Jurković, Zoran; Babić, Živko; Ćosić, Predrag // Tehnicki vjesnik / Technical Gazette;Oct-Dec2012, Vol. 19 Issue 4, p885 

    The paper deals with the concurrent engineering concept that implies simultaneous activities in integrated product and process development, through the application of Virtual Engineering Technologies, especially in the simulation of production, i.e. Virtual Manufacturing. The main goal is to...

  • New Modelling of Localized Necking in Sheet Metal Stretching. Bressan, José Divo // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p401 

    Present work examines a new mathematical model to predict the onset of localized necking in the industrial processes of sheet metal forming such as biaxial stretching. Sheet metal formability is usually assessed experimentally by testing such as the Nakajima test to obtain the Forming Limit...

  • Modeling metal-shaping operations in DEFORM-3D in order to efficiently design production processes. Karamyshev, A.; Nekrasov, I.; Parshin, V.; Fedulov, A.; Pugin, A. // Metallurgist;Jan2012, Vol. 56 Issue 1/2, p115 

    Software packages based on the finite-element method are widely used to perform theoretical studies of metal-shaping operations. One of the best-known packages is DEFORM-3D. The adequacy of models created in DEFORM-3D can be verified by experimental methods, one example being the...

  • Modeling and computation of the three-roller bending process of steel sheets. Ktari, Ahmed; Antar, Zied; Haddar, Nader; Elleuch, Khaled // Journal of Mechanical Science & Technology;Jan2012, Vol. 26 Issue 1, p123 

    Sheet metal bending processes are some of the most commonly used industrial manufacturing operations. The development and optimization of these processes are time consuming and costly. Therefore, finite element simulations may aid the design and quality assurance of sheet metal products. In the...

  • Finite element analysis and elimination of wrinkling in auto-body panels based on universal formability technology. Yan, Jie; Zhang, Xiangkui; Zhang, Jianwei; Hu, Ping; Zheng, Guojun // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p876 

    Wrinkling is one of the major defects in forming processes of auto-body panels. This paper focuses on application of universal formability technology to analyze and eliminate wrinkling defect. To analyze refinedly and eliminate efficiently, universal formability technology is introduced into...

  • Investigation and improvement of 3D rolling process for 3D surface parts. Wang, Daming; Li, Mingzhe; Wang, You; Cai, Zhongyi; Liu, Hongwei // International Journal of Advanced Manufacturing Technology;Apr2015, Vol. 78 Issue 1-4, p407 

    3D rolling is a novel forming process for manufacturing 3D surface parts by employing a pair of forming rolls as a forming tool. By controlling the nonuniform distribution of roll gap of the forming rolls, residual stress of the sheet metal makes the sheet metal bend in the transverse and...

  • Preface of the "Symposium on Process Metallurgy Technique Development". Nakamachi, E.; Manabe, K. // AIP Conference Proceedings;2014, Vol. 1618, p305 

    No abstract available.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics