TITLE

Study and numerical analysis on formability of quenching and partitioning steel sheets of auto-body

AUTHOR(S)
Hu, Xing; Liu, Yifan; Zhu, Lin
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p547
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Advanced high strength steel is the basic structure material for lightweight design and safety enhancement for automobile industry. Quenching and partitioning steel is a recently developed kind of low carbon and low alloy material with retained Austenite for the requirements of both high strength and high ductility. This paper focuses on the formability of a hinge pillar for some car under numerical modelling analysis. The results show that QP980 has an equal elongation comparing with DP590. Moreover, the numerical modelling results of QP980 are more sensitive to the selection of yielding equation comparing with DP590.
ACCESSION #
87656063

 

Related Articles

  • Numerical simulation and experimental validation of a ductile damage model for DIN 1623 St14 steel. Haji Aboutalebi, Farhad; Farzin, Mahmoud; Poursina, Mehrdad // International Journal of Advanced Manufacturing Technology;Mar2011, Vol. 53 Issue 1-4, p157 

    St14 steel (DIN 1623) is widely used in sheet metal forming industries because of its remarkable formability and also its low price. In this paper, damage behaviour of St14 steel is studied in order to be used in complex forming conditions with the goal of reducing the number of costly trials....

  • Prediction of Fracture Strains for DP980 Steel Sheets using a Modified Lou-Huh Ductile Fracture Criterion. Namsu Park; Hoon Huh // Key Engineering Materials;2014, Vol. 626, p347 

    This paper is concerned with the prediction of fracture strains for DP980 steel sheets using a modified Lou-Huh ductile fracture criterion. The usage of DP980 steel is significantly increasing in the automotive industry for weight reduction, enhancement of crashworthiness and safety of car body....

  • Super-strengthened steel.  // American Machinist;Oct2001, Vol. 145 Issue 10, p20 

    Reports on the development of water quenching process for strengthening steel parts. Impact of process on the automotive industry; Effect of heat transfer incorporation into the manufacturing cell on oil elimination; Difference of the process with traditional quenching.

  • A novel heat treatment line for processing of tailored small batch steels. Järvenpää, Antti; Lämsä, Janne; Patard, Emmanuel; Mäntyjärvi, Kari // Key Engineering Materials;2014, Vol. 611-612, p804 

    This study describes design and construction of a novel flexible heat treatment line for processing customer-oriented small batch steels. The induction heater (600 kW) developed is suitable for the sheet thickness in the range 3.2-30 mm and the width of 85 - 1250 mm. Sheets are fed using an...

  • Online Detection and Control of Strip Steel Mechanical Properties in Skin-pass Process. Yunpeng Chen; Chenglong Tang; Tingquan Gu // Advanced Materials Research;2014, Vol. 1004-1005, p1270 

    Firstly, the online detecting and controlling models of the strip steel mechanical properties in skin-pass process are proposed in this paper. The models are used to overcome the shortage of the conventional monitoring methods, and to reduce the fluctuations of the mechanical properties of the...

  • New Steels for Agricultural Machine Building. Ryabov, V.; Khlusova, E.; Golosienko, S.; Motovilina, G. // Metallurgist;Sep2015, Vol. 59 Issue 5/6, p505 

    Chemical composition is developed for new high-strength wear-resistant steels with guaranteed yield strength of 1200, 1500, and 1700 MPa. Phase transformations, microstructure, and mechanical properties are studied after steel quenching and low-temperature tempering. It is shown that fine...

  • Application of Quenching and Partitioning (Q&P) Processing to Press Hardening Steel. Seo, Eun; Cho, Lawrence; Cooman, Bruno // Metallurgical & Materials Transactions. Part A;Aug2014, Vol. 45 Issue 9, p4022 

    Press hardening steel (PHS) has been increasingly used for the manufacture of structural automotive parts in recent years. One of the most critical characteristics of PHS is a low residual ductility related to a martensitic microstructure. The present work proposes the application of quenching...

  • Warm stamping of the 3rd generation sheet steel for automobiles. Han Dong; Cunyu Wang; Ying Chen; Wenquqn Cao // Advanced Materials Research;2014, Vol. 1063, p219 

    The advantages and disadvantages of the conventional hot stamping steel and the hot tamping technology were shortly reviewed. It was proposed that new type steel with relative low austenization temperature and air hardening ability should be designed and produced to overcome the surface...

  • Numerical/experimental investigations about the warm hydroforming of an aluminum alloy component. Palumbo, G.; Piccininni, A.; Guglielmi, P.; Piglionico, V.; Scintilla, L. D.; Sorgente, D.; Tricarico, L. // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p135 

    The present work investigates the Hydro Forming process in warm conditions using a numerical/experimental approach; an Al alloy (AA6061 T6) component is used as case study. Experimental tests were carried out for characterizing the material and setting the numerical model. A preliminary...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics