TITLE

Recent developments in modeling of hot rolling processes: Part II - Applications

AUTHOR(S)
Hirt, Gerhard; Bambach, Markus; Seuren, Simon; Henke, Thomas; Lohmar, Johannes
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p231
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This publication gives a short overview of current developments in modeling and simulation of hot rolling processes of metals at the Institute of Metal Forming of RWTH Aachen University. It is based on the fundamentals treated in Part I also contained in this conference issue. It features applications in the field of fast on-line models, where a fast multi-stage rolling model and an analytical approach for predicting the through-thickness shear distribution are presented. In addition, a new concept for sensitivity analysis by automatic differentiation is introduced and discussed. Finally, applications of rolling simulations in the field of integrated computational materials engineering are presented with a focus on TWIP and linepipe steels as well as aluminum.
ACCESSION #
87656059

 

Related Articles

  • Prediction of grinding force in microgrinding of ceramic materials by cohesive zone-based finite element method. Feng, Jie; Chen, Peng; Ni, Jun // International Journal of Advanced Manufacturing Technology;Sep2013, Vol. 68 Issue 5-8, p1039 

    This study investigates grinding force prediction in microgrinding of ceramic materials by cohesive zone method (CZM) and finite element analysis (FEA). Based on detail abrasive cutting edge profile and maximum chip thickness analysis in microgrinding, a CZM-based finite element model is...

  • Sensitivity analyses in snow avalanche dynamics modeling and implications when modeling extreme events. Borstad, Christopher P.; McClung, D. M. // Canadian Geotechnical Journal;Sep2009, Vol. 46 Issue 9, p1024 

    We present the first snow avalanche dynamics model simulations to start in the middle of the avalanche path at the maximum expected speed for an extreme event. We first present a sensitivity analysis of the dynamics model to the various model inputs. A single-parameter Coulomb-type friction...

  • Applications of the Jones and 4 x 4 matrix formalisms in the theory of optical detection of picosecond acoustic pulses. Kouyaté, Mansour; Mounier, Denis; Pézeril, Thomas; Gusev, Vitalyi // AIP Conference Proceedings;5/24/2012, Vol. 1433 Issue 1, p557 

    The Jones and 4 x 4 matrix formalisms are applied to the analysis of the sensitivity of optical detection of shear acoustic pulse propagating in a layered structure. The polarimetry measurements give directly access to the detection of a shear pulse propagating in an isotropic layer. Simulations...

  • Study of Damage limit for aluminum alloy plates with surface cracks under cross-thickness bending. Haiyang YUAN; Yunxin WU; Zhong-huai WU; Zhi-qi LIAO // Advanced Materials Research;2014, Issue 881-883, p1365 

    A damage limit prediction model was built due to fracture failure problems of aluminum alloy plates. Based on the 'global' plastic collapse of the entire cross-section containing the defect, the relationships of crack width and depth of fracturing 7075 aluminum alloy plates with either shallow...

  • Finite Element Simulation on Punching Shear Behavior of Reinforced Concrete Slabs. Jahangir Alam, A. K. M.; Amanat, Khan Mahmud // ISRN Civil Engineering;2012, p1 

    A finite element simulation for experimental punching shear behavior of reinforced concrete slab is presented in this paper. The numerical simulation is based on previously tested 15 reinforced concrete model slabs. Finite element analysis of reinforced con-crete slabs subjected to punching load...

  • The influence of shear layer thickness on the stability of confined two-dimensional wakes. Biancofiore, L.; Gallaire, F. // Physics of Fluids;Mar2011, Vol. 23 Issue 3, p034103 

    The influence of confinement onto the inviscid and incompressible linear stability of the family of wakes introduced by Monkewitz [Phys. Fluids 31, 999 (1988)] is examined. The nondimensional parameters of the model, the velocity ratio Λ, defined as ratio of the velocity gap to the mean...

  • Experimental Verification of Mold Filling Analysis for an Automotive Recliner Lever. N., Jayalakshmi; K., Ramesha D.; G., PremaKumara // International Journal of Applied Engineering Research;2012, Vol. 7 Issue 6, p673 

    Using molding simulation, it is possible to get early feedback on how wall thickness and gate locations will affect the quality of the final part. Predictions of weld lines, Fill pattern and temperature distributions allow to layout and optimize the gate and runner systems, all before the mold...

  • Finite element simulation of plate or sheet metal forming processes using tetrahedral MINI-elements. Chung, Wanjin; Kim, Bongsu; Lee, Seongwon; Ryu, Hoyeun; Joun, Mansoo // Journal of Mechanical Science & Technology;Jan2014, Vol. 28 Issue 1, p237 

    In this paper, finite element prediction of sheet metal forming process is investigated using solid elements. A three-dimensional rigidviscoplastic finite element method with linear tetrahedral MINI-elements is employed. This technique has traditionally been used for bulk metal forming...

  • Partial Coverage Inspection of Corroded Engineering Components Using Extreme Value Analysis. Benstock, Daniel; Cegla, Frederic // AIP Conference Proceedings;2016, Vol. 1706 Issue 1, p1 

    Ultrasonic thickness C-scans provide information about wall thickness of a component over the entire inspected area. They are performed to determine the condition of a component. However, this is time consuming, expensive and can be unfeasible where access to a component is restricted. The...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics