Description of anisotropy and the Bauschinger effect on various types of steel sheets

Yoshida, Fusahito; Hamasaki, Hiroshi; Uemori, Takeshi
May 2013
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p158
Academic Journal
To describe the anisotropy of sheets a sixth-order polynomial type 3D yield function is proposed. The yield function is constructed as a sum of several components of the Cazacu-Barlat function (2001) which was derived as an extension of the J2-J3 Drucker yield criterion (1949) to orthotropy using the linear transformation of the stress deviator. In this framework of modeling, the convexity of the yield locus is perfectly guaranteed. The model was validated by comparing the numerical predictions of planar anisotropy of r-values and flow stress directionality, as well as the shape of yield loci, with the corresponding experimental data on several types of steel sheets (high r-valued IF steel and SPCE, and high strength steel sheets of 440-980MPa TS grades). For most of steel sheets, the model of the sum of two J2 components, which involve eight anisotropic coefficients, is sufficient for the description of their anisotropies. For the description of the Bauchinger effect and cyclic workhardening characteristic, Yoshida-Uemori kinematic hardening model (2002a, 2002b, 2003) was employed, which includes a new proposal to describe non-saturation type workhardening.


Related Articles

  • Analysis on sheet cyclic plastic deformation using mixed hardening model. Li, Qun; Jin, Miao; Yuxin, Zhu // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p982 

    Treating the cyclic deformation problem of sheet flowing through drawbead as the object of the research, using HILL anisotropy yield criterion and mixed hardening model, the cyclic plastic deformation mechanism of sheet was studied, the deformation characteristics of sheet subjected to cyclic...

  • Superfluid Phases of He in a Periodic Confined Geometry. Wiman, J.; Sauls, J. // Journal of Low Temperature Physics;Apr2014, Vol. 175 Issue 1/2, p17 

    Predictions and discoveries of new phases of superfluid He in confined geometries, as well as novel topological excitations confined to surfaces and edges of near a bounding surface of He, are driving the fields of superfluid He infused into porous media, as well as the fabrication of sub-micron...

  • Reduction of Anisotropy in Cold-Rolled Duplex Stainless Steel Sheets by Using Sigma Phase Transformation. Fargas, G.; Akdut, N.; Anglada, M.; Mateo, A. // Metallurgical & Materials Transactions. Part A;Nov2011, Vol. 42 Issue 11, p3472 

    The mechanical properties of rolled duplex stainless steel (DSS) products manufactured by the current industrial process exhibit a strong anisotropy. This fact is evidently due to the two-phase nature of DSSs. During industrial rolling, not only the morphology of the microstructure changes from...

  • Phase transitions in coupled double-layer systems. Hu, Xiao; Kawazoe, Yoshiyuki // Journal of Applied Physics;5/15/1994, Vol. 75 Issue 10, p6486 

    Provides information on a study that investigated phase transition in magnetic systems consisting of a capping layer with uniaxial anisotropy and a recording layer with vertical anisotropy. Details on the capping layer of in-plane anisotropy; Information the capping layer of vertical anisotropy.

  • Tracing the phase boundaries of hard spherocylinders. Bolhuis, Peter; Frenkel, Daan // Journal of Chemical Physics;1/8/1997, Vol. 106 Issue 2, p666 

    Discusses the mapping of the complete phase diagram of hard spherocylinders as a function of the shape anisotropy L/D. Use of special computational techniques to locate phase transitions; Phase boundaries of five different phases; Computation of the initial slope of the coexistence curve.

  • Parameter spaces for linear and nonlinear whistler-mode waves. Summers, Danny; Tang, Rongxin; Omura, Yoshiharu; Lee, Dong-Hun // Physics of Plasmas;Jul2013, Vol. 20 Issue 7, p072110 

    We examine the growth of magnetospheric whistler-mode waves which comprises a linear growth phase followed by a nonlinear growth phase. We construct time-profiles for the wave amplitude that smoothly match at the transition between linear and nonlinear wave growth. This matching procedure can...

  • Ultrafast Structural Transformations in Graphite. Ashitkov, S. I.; Agranat, M. B.; Kondratenko, P. S.; Anisimov, S. I.; Fortov, V. E.; Temnov, V. V.; Sokolowski-Tinten, K.; Zhou, P.; von der Linde, D. // JETP Letters;1/25/2002, Vol. 75 Issue 2, p87 

    Femtosecond laser-induced structural transitions in graphite were studied by time-resolved optical anisotropy measurements. The decay of the anisotropic reflectivity seems to indicate a loss of long-range order on a subpicosecond time scale, which is much faster than the electron–phonon...

  • Transformation kinetics in one-dimensional processes with continuous nucleation: The effect of shielding. Weinberg, Michael C.; Birnie, Dunbar P. // Journal of Chemical Physics;9/22/1996, Vol. 105 Issue 12, p5138 

    A derivation is presented for the fraction of material transformed as a function of time, X(t), for one-dimensional phase transformations which occur via continuous nucleation and growth and which produce anisotropic particles. This derivation, which accounts for shielding effects and does not...

  • Displacive Magnetic Phase Transitions upon Spin Ordering in Magnets with Strong Single-Ion Anisotropy. Kalita, V. M.; Loktev, V. M. // Physics of the Solid State;Aug2003, Vol. 45 Issue 8, p1523 

    This paper reports on the results of investigations into the magnetic ordering of magnets with integer spins of ions and sufficiently strong easy-plane single-ion anisotropy. It is demonstrated that magnetic ordering in the studied systems occurs through a displacive magnetic phase transition....


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics