TITLE

Advanced numerical models for the thermo-mechanical-metallurgical analysis in hot forging processes

AUTHOR(S)
Ducato, Antonino; Fratini, Livan; Micari, Fabrizio
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p3
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In the paper a literature review of the numerical modeling of thermo-mechanical-metallurgical evolutions of a metal in hot forging operations is presented. In particular models of multiaxial loading tests are considered for carbon steels. The collected examples from literature regard phases transformations, also martensitic transformations, morphologies evolutions and transformation plasticity phenomena. The purpose of the tests is to show the correlation between the mechanical and the metallurgical behavior of a carbon steel during a combination of several types of loads. In particular a few mechanical tests with heat treatment are analyzed. Furthermore, Ti-6Al-4V titanium alloy is considered. Such material is a multi-phasic alloy, at room temperature made of two main different phases, namely Alpha and Beta, which evolve during both cooling and heating stages. Several numerical applications, conducted using a commercial implicit lagrangian FEM code are presented too. This code can conduct tri-coupled thermo-mechanical-metallurgical simulations of forming processes. The numerical model has been used to carry out a 3D simulation of a forging process of a complex shape part. The model is able to take into account the effects of all the phenomena resulting from the coupling of thermal, mechanical and metallurgical events. As simulation results strongly depend on the accuracy of input data, physical simulation experiments on real-material samples are carried out to characterize material behavior during phase transformation.
ACCESSION #
87656044

 

Related Articles

  • Effect of Low-Temperature Oxidation and Oxynitriding on the Fretting Corrosion of VT22 Titanium Alloy. Dukhota, O.; Pohrelyuk, I.; Molyar, O.; Pichuhin, A.; Luk'yanenko, O. // Materials Science;Sep2012, Vol. 48 Issue 2, p213 

    We have investigated the influence of oxide and oxynitride layers, formed at the stage of aging ( T = 620°C, t = 7 h), on the fretting resistance of VT22 titanium alloy (Ti-5Al-4.75Mo-4.75V-1Cr-1Fe) for the optimization of phase-structural state of the modified layer. It has been found that...

  • MICROSTRUCTURAL CHANGES OCCURRED DURING THERMOMECHANICAL PROCESSING OF Ti- 6A1-7Nb ALLOY. CINCA, Ion; PETRESCU, Mircea Ionuţ // Metalurgia International;May2013, Vol. 18 Issue 5, p84 

    This paper presents some scientific results referring to structural characteristics of a Ti-Al-Nb alloy, processed by plastic deformation and heat treatment. In order to investigate structural characteristics two different phase states were used, the "lower" temperature phase (α+β) (~...

  • Thermo-mechanical modeling of distortions promoted during cooling of Ti-6Al-4V part produced by superplastic forming. ROLLIN, Maxime; VELAY, Vincent; PENAZZI, Luc; POTTIER, Thomas; SENTENAC, Thierry; IRANZO-PEREZ, Laura; DUPUY, Alain; KHELIFATI, Gaël // Materials Science Forum;2016, Vol. 838/839, p196 

    In AIRBUS, most of the complex shaped titanium fairing parts of pylon and air inlets are produced by superplastic forming (SPF). These parts are cooled down after forming to ease their extraction and increase the production rate, but AIRBUS wastes a lot of time to go back over the geometric...

  • Phase Stability in the Mo-Ti-Zr-C System via Thermodynamic Modeling and Diffusion Multiple Validation. Kar, Sujoy; Dheeradhada, Voramon; Lipkin, Don // Metallurgical & Materials Transactions. Part A;Aug2013, Vol. 44 Issue 8, p3999 

    Alloys in the Mo-rich corner of the Mo-Ti-Zr-C system have found broad applications in non-oxidizing environments requiring structural integrity well beyond 1273 K (1000 °C). Alloys such as TZM (Mo-0.5Ti-0.08Zr-0.03C by weight %) and TZC (Mo-1.2Ti-0.3Zr-0.1C by weight) owe much of their high...

  • Hot forming process analysis of Ti6Al-4V alloy: experiment, behaviour modelling and Finite Element simulation. Velay, V.; Matsumoto, H.; Vidal, V.; Penazzi, L.; Nazaret, F.; Marcel, Y.; Bouillane, M. // Materials Science Forum;2016, Vol. 838/839, p183 

    The present investigation aims at evaluating and understanding the thermo-mechanical behaviour of a titanium alloy under hot forming conditions. In this work, several considerations are addressed. First, Scanning Electron Microscopy observations are performed to assess the evolutions of...

  • Dynamic Effects during Thermoelastic Martensitic Transformations in TiNiCu Alloys. Shakhnazarov, T. A.; Kamilov, I. K.; Ismailov, Sh. M.; Bilalov, A. R. // Technical Physics Letters;Apr2002, Vol. 28 Issue 4, p333 

    Spontaneous periodic oscillations in the phase transformation rate during a system evolution toward a stationary state are observed in TiNiCu alloys. The conditions of manifestation and amplification of these oscillations are established and possible applications of this phenomenon are considered.

  • TITANIUM ALLOY PROCESSING. Prasad, Y. V. R. K.; Seshacharyulu, T.; Medeiros, Steve C.; Frazier, William G.; Morgan, James T.; Malas, James C. // Advanced Materials & Processes;Jun2000, Vol. 157 Issue 6, p85 

    Summarizes the developments in the area of titanium processing that have helped in the design and optimization of hot working processes for Ti-6A1-4V. Overview of titanium grades; Steps involved in the thermomechanical processing of Ti-6A1-4V alloy; Processing maps approach to materials modeling.

  • Sample preparation for microstructural analysis.  // Ceramic Industry;Apr95, Vol. 144 Issue 4, p13 

    Presents a method of preparing titanium alloys for microstructural analysis. Use of abrasive wheels with an abrasive cutter or diamond blade for sectioning titanium alloys; Description for using an oil-based diamond suspension on a platen; Chart illustrating a sample preparation.

  • Numerical simulation of linear fiction welding (LFW) processes. Fratini, L.; La Spisa, D. // AIP Conference Proceedings;5/4/2011, Vol. 1353 Issue 1, p1284 

    Solid state welding processes are becoming increasingly important due to a large number of advantages related to joining 'unweldable' materials and in particular light weight alloys. Linear friction welding (LFW) has been used successfully to bond non-axisymmetric components of a range of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics