Effect of die shape on H62 brass forming for continuous extrusion based on numerical simulation research

Li, Bing; Yao, Xiangjun; Yun, Xinbing; Song, Baoyun
May 2013
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p918
Academic Journal
Continuous extrusion extending forming technology has much excellence such as large extending scale, high productivity, energy-saving, low consumption and so on, especially adapts to the products with large dimension, high strength and extra requirement of length. By comparing with traditional technology, the brass strip produced by introducing this technology possesses enough advantages. DEFORM software was used as the tool to simulate, analyze and establish the brass analysis model for deformation process, based on rigid viscoplasticity FEM theory. The H62 brass were simulated, and the equivalent stress field, equivalent strain field, billet and die temperature field were analyzed. With the increasing of the width-thickness ratio, the numerical value of the stress field, strain field, billet and die deformation temperature increases. Through the tensile testing and observation of microstructure evolution, the properties and microstructure evolutions of brass were found during continuous extrusion. The grain size after extrusion is finer than the one before extrusion significantly, and the grain size distribution is more uniform. With the increasing of the width-thickness ratio, the tensile strength, elongation of the products decreases, and the grain size of the microstructure gradually increases.


Related Articles

  • Visco-Plastic Flow of Metal in Dynamic Conditions of Complex Strain Scheme. Korbel, A.; Bochniak, W.; Ostachowski, P.; Błaż, L. // Metallurgical & Materials Transactions. Part A;Sep2011, Vol. 42 Issue 9, p2881 

    The article applies to a piece of research inspired by the new technology of plastic metal forming called the KOBO method, which uses the mechanical and structural effects of cyclic changes of deformation path. Its commercial usage in the field of large plastic deformations, especially for the...

  • Influence of Punch Geometry on Process Parameters in Cold Backward Extrusion. Plancˇak, M.; Barisˇic, B.; Car, Z.; Movrin, D. // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p519 

    In cold extrusion of steel tools make direct contact with the metal to be extruded. Those tools are exposed to high contact stresses which, in certain cases, may be limiting factors in applying this technology. The present paper was bound to the influence of punch head design on radial stress at...

  • On the Importance of Thermo-Mechanical Modelling of the Double Cup Extrusion Test. Duran, Deniz; Karadogan, Celalettin; Ozdemir, Izzet // Advanced Materials Research;2014, Vol. 966-967, p311 

    Finding the correct friction coefficient for the simulation of bulk metal forming processes is crucial. The practical approach nowadays for this objective is to conduct a friction sensitive process-test and the corresponding numerical simulation in order to reveal the friction coefficient. The...

  • Investigation and numerical analysis of strain distribution in the twist extrusion of pure aluminum. Asghar, Seyed; Mousavi, Akbari; Bahador, Shahab // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Feb2011, Vol. 63 Issue 2, p69 

    The effects of performing three twist extrusion passes on high purity aluminum samples were studied in this paper in regard to numerical analysis and experimental studies. The finite element analysis of the von-Mises stress and the equivalent plastic strain in the outer longitudinal and...

  • INFLUENCE OF VISCOPLASTIC PROPERTIES OF GROUND ON THE BEHAVIOR OF THE BASE. Mironov, V. A.; Sofyin, O. Ye. // Scientific Herald of the Voronezh State University of Architectu;Feb2013, Vol. 17 Issue 1, p16 

    Statement of the problem. The calculation of core structures should consider as many prominent features of ground as possible and the technology factors affecting the stress-strain state of the base. In this regard, the aim of this work is to develop computational and theoretical apparatus,...

  • Effects of Vibrations on Metal Forming Process: Analytical Approach and Finite Element Simulations. Armaghan, Khan; Christophe, Giraud-Audine; Gabriel, Abba; Régis, Bigot // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p787 

    Vibration assisted forming is one of the most recent and beneficial technique used to improve forming process. Effects of vibration on metal forming processes can be attributed to two causes. First, the volume effect links lowering of yield stress with the influence of vibration on the...

  • Study of Multi Pass Equal Channel Angular Pressing Using 3D Finite Element Analysis. Setia, Rajat; Sharma, Rahul Swarup; Sharma, Shanti Swarup; Raj, K. Hans // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p530 

    Equal Channel Angular Pressing (ECAP) has emerged as most prominent Severe Plastic Deformation (SPD) technique used to produce an ultrafine grained (UFG) structure in metals in order to improve their mechanical and physical properties. In this work Finite Element modeling of ECAP is attempted in...

  • Hot Deformation Behavior of Bearing Steels. Moon, H. K.; Joun, M. S.; Lee, J. S.; Yoo, S. J.; Lee, J. K.; Ghosh, S.; Castro, J.C. // AIP Conference Proceedings;2004, Vol. 712 Issue 1, p1676 

    The material behaviors of two types of bearing steels at hot working conditions are investigated. Stress-strain curves at various temperatures (900∼1,250°C) and strain rates (1∼50 /sec) are obtained by compression tests with a computer controlled servo-hydraulic Gleeble 3800 testing...

  • Based on ANASYS Immersed Tube Tunnel Three-Dimensional Finite Element Analysis. Yikai Wu; Tiejun Sun; Yaqiong Wang; Yongli Xie // Applied Mechanics & Materials;2014, Issue 548-549, p1672 

    Combining with the Pearl river underwater tunnel engineering project example from Huangsha to Fangcun in Guangzhou, this paper introduces the 3-dimensional finite element analysis ANASYS of immersed tube tunnel. According the data extracted from the actual project, immersed tube tunnel...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics