TITLE

Application of constitutive model considering nonlinear unloading behavior for Gen.3 AHSS

AUTHOR(S)
Sun, Li; Wagoner, R. H.
PUB. DATE
May 2013
SOURCE
AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p440
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Nonlinear unloading behavior has been reported as an important factor for accurate springback prediction. In this study, a newly proposed special component of strain: "Quasi-Plastic-Elastic" ("QPE") strain was utilized to study the springback behavior of Advanced High Strength Steels (AHSS). Several types of steels, including IF steel, DP780, TRIP780, DP980, TWIP980 and QP980 were considered in this research. The results showed that all the tested steels have following behavior: 1) QPE strain is recoverable, like elastic deformation. 2) It dissipates work, like plastic deformation. A 3-D constitutive model considering QPE behavior was implemented in Abaqus/Standard with shell element and applied to draw-bend springback test for Gen. 3 AHSS, QP980. Predictions for springback using the QPE model were more accurate compared with standard elastic-plastic models.
ACCESSION #
87656031

 

Related Articles

  • A comparative study on the formability prediction of steel sheets by anisotropic models based on associated flow rule and non-associated flow rule. Junhe Lian; Deok-Chan Ahn; Dong-Chul Chae; Münstermann, Sebastian; Bleck, Wolfgang // Key Engineering Materials;2015, Vol. 651-653, p150 

    A comparative study on the formability prediction of a ferritic steel sheet by anisotropic models based on associated flow rule and non-associated rule is carried out. The uniaxial tensile tests along seven directions of the sheet from rolling direction to transverse direction with an interval...

  • ANALYSIS ON DEFORMATION CHARACTERISTICS AND ENERGY DISSIPATION OF MARBLE UNDER DIFFERENT UNLOADING RATES. Liming Zhang; Su Gao; Zaiquan Wang; Mingyuan Ren // Tehnicki vjesnik / Technical Gazette;Sep/Oct2014, Vol. 21 Issue 5, p987 

    Failure tests were conducted on marble under different unloading confining pressure rates to obtain the energy change curve of whole-process deformation and failure. With increasing unloading rate, the peak stress differences in marble failure were reduced, confining pressure differences in...

  • Studying the rate of heat dissipation at the vertex of a fatigue crack. Izyumova, A.; Plekhov, O.; Vshivkov, A.; Prokhorov, A.; Uvarov, S. // Technical Physics Letters;Sep2014, Vol. 40 Issue 9, p810 

    The thermodynamics of the process of fatigue-crack propagation in plastic materials is analyzed by the example of chromium-nickel steel of 8Kh18N10 grade. An original device has been developed that is capable of measuring the rate of dissipation of the plastic deformation energy at the crack...

  • Strain states and fracture conditions for rigid-plastic bodies. Khromov, A. I.; Kocherov, E. P.; Grigor'eva, A. L. // Doklady Physics;Apr2007, Vol. 52 Issue 4, p228 

    The article presents a study on the strain-energy fracture criterion on the framework of strengthening rigid-plastic bodies. Some of the factors considered in the study include train states of a rigid-plastic body, its deformation process, and the loading surface associated with level lines of...

  • Effect of cold rolling on the indentation deformation of AA6061 aluminum alloy. Yang, Fuqian; Du, Wenwen; Okazaki, Kenji // Journal of Materials Research;May2005, Vol. 20 Issue 5, p1172 

    The indentation behavior of cold-rolled AA6061 Al alloy was investigated. Following the approach suggested by Tabor, indentation stress-indentation strain curves were constructed and analyzed. The indentation stress required to create the same indentation strain increases with an increase in the...

  • Criterial relationships for residual life assessment of materials. Lebedev, A.; Mikhalevich, V. // Strength of Materials;Jul2006, Vol. 38 Issue 4, p348 

    The paper gives the research findings which make it possible to construct an algorithm for the residual life assessment within the framework of a tensor approach to describing damage in a material under inelastic deformation. The authors propose explicit finite criterial relationships for the...

  • Optimal Stress Fields and Load Capacity Ratios of Perfectly Plastic Bodies and Structures. Segev, Reuven; Falach, Lior // AIP Conference Proceedings;9/30/2010, Vol. 1281 Issue 1, p368 

    A mathematical setting that applies to the analysis of strength of perfectly plastic bodies and structures is presented. Specifically, the worst case analysis under the loads in any vector subspace of the space of all loadings is performed. It is shown that there is a number C, depending only on...

  • 1867. Dynamic stress prediction method for rubbing blades. Qian Zhao; Ziliang Liu; Yonghui He; Hongliang Yao; Bangchun Wen // Journal of Vibroengineering;Feb2016, Vol. 18 Issue 1, p1 

    The common technique frequently employed in dynamic stress analysis of vibration systems is time-consuming and difficult to solve when dealing with the dynamic systems with nonlinear contacts, such as turbine blades subjected to rubbing faults. To address this deficiency, an approach combining...

  • Surface flows of inelastic spheres. Berzi, Diego; Jenkins, James T. // Physics of Fluids;Jan2011, Vol. 23 Issue 1, p013303 

    We study flows of inelastic spheres on the surface of an erodible bed between frictional sidewalls and distinguish two regions in such flows: a dilute, diffuse region, neighboring the free surface, for which we solve a boundary-value problem based on the kinetic theory, and a dense algebraic...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics