TITLE

Experimental Investigation and Mathematical Modeling of Laser Deep Engraving Process for Microapplication

AUTHOR(S)
Kasman, Ş.; Saklakoğlu, İ.
PUB. DATE
June 2013
SOURCE
Arabian Journal for Science & Engineering (Springer Science & Bu;Jun2013, Vol. 38 Issue 6, p1539
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper investigates the effects of process parameters (laser power, scan speed, frequency and fill spacing) on the laser deep engraving of AISI 316 stainless steel. The optimum process conditions for minimization of the surface roughness and maximization of the engraving depth are also determined. An experimental investigation consisting of 108 different combinations is carried out to determine the process parameters which contribute engraved surface roughness and depth. The results indicate that both surface roughness and engraving depth significantly decrease with an increase in the scan speed and a decrease in the laser power. A second order regression model is also used to formulate the relationship between the parameters and process responses. The results of the regression analysis show that the calculated values from the regression model and measured values from the experiments are very similar. Moreover, the results suggest that the regression model might be used to predict the surface roughness and engraving depth.
ACCESSION #
87609283

 

Related Articles

  • INFLUENCE OF ACCUMULATION EFFECTS ON LASER ABLATION THRESHOLD IN METALS. Brikas, Marijus; Darčianovas, Gediminas; Gedvilas, Mindaugas // International Conference: Radiation Interaction with Material & ;2006, p211 

    Intensive laser radiation is able to change properties of the material surface so that the material becomes more sensitive to laser radiation and its ablation threshold becomes several times lower. The ablation threshold dependence on the number of pulses applied to the test material and the...

  • Quantitative analysis of intermetallic precipitates in high Mo superaustenitic stainless steel. Anburaj, J.; Nazirudeen, S. S. Mohamed; Thillairajan, K.; Chandrasekar, A.; Narayanan, R. // Applied Mechanics & Materials;2014, Issue 592-594, p711 

    Influence of ageing temperatures and ageing time intervals on the intermetallic phases of high Mo superaustenitic stainless steel (SASS) is studied. To form the intermetallic phases the alloy was aged for 1 hour and 10 hours at different temperatures in the range of 500-1000°C. Chi forms at...

  • Laser Welding Characterization of Kovar and Stainless Steel Alloys as Suitable Materials for Components of Photonic Devices Packaging. Fadhali, M. M. A.; Zainal, Saktioto J.; Munajat, Y.; Jalil, A.; Rahman, R. // AIP Conference Proceedings;Mar2010, Vol. 1217 Issue 1, p147 

    The weldability of Kovar and stainless steel alloys by Nd:YAG laser beam is studied through changing of some laser beam parameters. It has been found that there is a suitable interaction of the pulsed laser beam of low power laser pulse with both the two alloys. The change of thermophysical...

  • Evaluation on the Corrosion of the Three Ni-Cr Alloys with Different Composition. Rao, Srinivasa B.; Chowdhary, Ramesh // International Journal of Dentistry;2011, p1 

    Dental casting alloys are widely used in contact with oral tissue for many years now. With the development of new dental alloys over the past 15 years, many questions remain unanswered about their biologic safety. Concepts and current issues concerning the response to the biologic effects of...

  • Measurements of energy fluctuations of a saturated 46.9 nm Ar laser produced in Z-pinch capillary discharges. Ritucci, A.; Tomassetti, G.; Reale, A.; Reale, L.; Flora, F.; Mezi, L. // Applied Physics Letters;3/7/2005, Vol. 86 Issue 10, p101106 

    We report on the achievement of significant energy stability in a 46.9 nm soft x-ray laser pumped by fast Z-pinch capillary discharges. The energy stability, investigated over, hundreds of shots, is optimized by operating the laser in the highly saturated regime using capillary discharges with...

  • CHANGE DETECTION ON CULTURAL HERITAGE BY RADIOMETRIC COMPARISON OF TERRESTRIAL PHOTOS AND TERRESTRIAL LASER SCANNING. Stal, Cornelis; De Wulf, Alain; Maeyer, Philippe De; Deruyter, Greta; Goossens, Rudi; Hendrickx, Marijn; Nuttens, Timothy // Proceedings of the International Multidisciplinary Scientific Ge;2013, p587 

    Terrestrial photogrammetry and terrestrial laser scanning are important tools for the documentation of cultural heritage. The combination of both tools enables the generation of highly accurate geometric and radiometric 3D models. This data combination can be performed directly, using integrated...

  • Laser material processing in Spain.  // Industrial Laser Solutions;Feb2005, Vol. 20 Issue 2, p2 

    The article reports that the Technological Institute on Optics, Color and Imaging at Spain hosted the First National Workshop on Laser Material Processing on November 3 and 4, 2004. The meeting continues a series of single-day encounters organized by AIDO in the previous years. Jose A. Ramos,...

  • Time-dependent 3-D modelling of laser surface heating for the hardening of metallic materials. Colombo, V.; Mentrelli, A.; Trombetti, T. // European Physical Journal D -- Atoms, Molecules, Clusters & Opti;Dec2003, Vol. 27 Issue 3, p239 

    A numerical code for the time-dependent three-dimensional modelling of the laser surface heating for the hardening of metallic materials has been developed by the authors. The temperature-dependence of the thermal properties of the material (stainless steel) is taken into account in the frame of...

  • Precision Laser Cutting of Thin-wall Objects. Azizbekian, G. V.; Grigoryan, G.V.; Kazaryan, M. A.; Lyabin, N. A.; Melkonyan, A. A.; Mokrushin, Yu. M.; Movsisyan, G. D.; Nalbandyan, R.; Paramonov, V. S.; Poghosyan, L. A.; Shakin, O.V. // Lasers in Engineering (Old City Publishing);2006, Vol. 16 Issue 1/2, p27 

    Precision cutting of stainless steel and copper foils with a thickness from 125 μm to 250 μm has been demonstrated. During precision cutting of intricate forms in thin foils the object is not moved, which significantly increases the accuracy of laser treatment and cutting. In self...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics