TITLE

Elegant and simple--Stretching during spinodal decomposition aligns porosity in glass

PUB. DATE
December 2012
SOURCE
American Ceramic Society Bulletin;Dec2012, Vol. 91 Issue 9, p16
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article discusses research on the use of stretch forming method during spinodal decomposition of porous glass monoliths. It references a study by A. Barascu and colleagues, published in the 2012 issue of the "Journal of the American Ceramic Society." It mentions that the method enables researchers to align the porosity of the glass materials.
ACCESSION #
87607118

 

Related Articles

  • Synthesis and investigation of the structure of ceramic nanopowders in the ZrO-CeO-AlO system. Panova, T. I.; Arsent'ev, M. Yu.; Morozova, L. V.; Drozdova, I. A. // Glass Physics & Chemistry;Aug2010, Vol. 36 Issue 4, p470 

    new technological scheme has been developed for synthesizing nanocrystalline powders in the ZrO-CeO-AlO system. The powders have been used for preparing nanoceramic materials with an open porosity of ∼1%. The physicochemical properties of these ceramic materials have been investigated.

  • Porous Permeable Ceramics Based on Aluminum Oxide. Lukin, E. S.; Kuteinikova, A. L.; Popova, N. A. // Glass & Ceramics;Mar/Apr2003, Vol. 60 Issue 3/4, p81 

    The effect of additives (within limits of 15 – 30%) of disperse alumina with different content (up to 2.3%) of TiO2 and MgO on properties of porous permeable materials based on electromelted corundum of different degrees of dispersion is investigated. Porous ceramics with open porosity up...

  • Processing of porous structures of YBa2Cu3O7-δ High-temperature superconductor. Fiertek, P.; Sadowski, W. // Materials Science (0137-1339);2006, Vol. 24 Issue 4, p1103 

    Technological aspects of fabrication of the YBa2Cu3O7-δ ceramics with preparation of open pores are presented. The highest porosity of the sample with open pores and suitable mechanical properties was performed using C12H22O11 (sugar sucrose) as the supplementary phase.

  • Wetting of bulk metallic glass forming liquids on metals and ceramics. Ding, Shiyan; Kong, Jian; Schroers, Jan // Journal of Applied Physics;Aug2011, Vol. 110 Issue 4, p043508 

    Contact wetting angle of Pd43Ni10Cu27P20, Pt57.5Cu14.7Ni5.3P22.5, Au49Ag5.5Pd2.3Cu26.9Si16.3, and Zr57Nb5Cu15.4Ni12.6Al10 bulk metallic glass forming alloys have been determined on materials that are used in micro and nano fabrication. Employing the sessile drop technique at a temperature above...

  • Ceramic Source Special Focus: & Ceramics. Thomas, Martin A. // American Ceramic Society Bulletin;Dec2004, Vol. 83 Issue 12, p100 

    This article discusses the process of manufacturing ceramics. The forming of ceramics from powders necessarily generates porosity by fixing, in 3-dimensions, positions and relationships of interparticle voids. Low pressure forming methods generate higher porosity and higher pressures produce...

  • Pore Structure Characterization Techniques. Jena, Akshaya; Gupta, Krishna // American Ceramic Society Bulletin;Mar2005, Vol. 84 Issue 3, p28 

    Focuses on porous ceramics structure characterization techniques. Flow porometry; Extrusion porosimetry; Intrusion porosimetry; Gas Adsorption.

  • A general process for in situ formation of functional surface layers on ceramics. Ishikawa, Toshihiro; Yamaoka, Hiroyuki; Harada, Yoshikatsu; Fujii, Teruaki; Nagasawa, Toshio // Nature;3/7/2002, Vol. 416 Issue 6876, p64 

    Investigates the formation of functional surface layers on ceramics. Incorporation of selected low-molecular-mass additives into the precursor polymer; Stabilization of compositionally changed surface region by calcination; Impact of thermal treatment on the additives.

  • Effects of designed tubular porosity on compressive strengths of honeycomb ceramics. Hattiangadi, Ashwin; Bandyopadhyay, Amit // Journal of Materials Science;Jul2004, Vol. 39 Issue 14, p4575 

    Three-dimensional honeycomb porous ceramics were fabricated using the fused deposition process. The structures were designed to have a controlled interconnected porosity. Elastic interactions between pores of honeycomb ceramic materials were then evaluated for different pore parameters using the...

  • HIGH EFFICIENCY POROUS CERAMICS WITH CONTROLLABLE POROSITY. Korjakins, Aleksandrs; Upeniece, Liga; Bajare, Diana // Proceedings of the International Conference on Civil Engineering;2013, Vol. 4 Issue 2, p5 

    The increasingly growing anxiety in society about global warming and interest about construction materials which are less harmful to the environment, encourages manufactures and scientists to think about the use of more effective resources which are available and necessary for production, as...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics