TITLE

Laser-based process for diamond deposition

PUB. DATE
May 2013
SOURCE
Industrial Laser Solutions;May/Jun2013, Vol. 28 Issue 3, p2
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article offers information on a new process which is developed by a private sector research institute of Germany, Bremer Institut für angewandte Strahltechnik for diamond coating. It explains that this chemical vapor deposition (CVD) and Physical vapor deposition (PVD) based process belongs to the principle of optical gas breakthrough for the intermediate layers and the synthesis of diamond.
ACCESSION #
87602492

 

Related Articles

  • Cut and dried. Oakham, Martin // Engineer (00137758);4/23/2007, Vol. 293 Issue 7722, p38 

    The article reports on the aimed development of a cutting tool equipment which can meet higher productivity demands of customers and can demonstrate effective metal cutting capabilities. This goal, however, is complicated by the metallurgists' development of materials which can withstand extreme...

  • Thermal Spray Coatings and High Performance Engine Valves. Keijzers, Guido // Advanced Materials & Processes;Aug2010, Vol. 168 Issue 8, p42 

    The article discusses the importance of thermal spray coatings in the racing industry in the U.S. It emphasizes the capability of a high performance titanium engine valve in enhancing its inherently poor material wear characteristics by utilizing different coating techniques. It cites several...

  • An Investigation of Tribological Properties of CN and TiCN Coatings. Zhu, B.; Mardel, J.; Kelly, G. L. // Journal of Materials Engineering & Performance;Aug2004, Vol. 13 Issue 4, p481 

    Today the tool industry on a worldwide basis uses hard, wear-resistant, and low-friction coatings produced by different processes such as electrochemical or electroless methods, spray technologies, thermochemical, chemical-vapor deposition (CVD), and physical vapor deposition (PVD). In the...

  • PVD VE CVD KAPLAMALI SEMENTÄ°T KARBÃœR KESÄ°CÄ° TAKIMLARIN Ä°ÅžLEME PARAMETERLERÄ°NE BAÄžLI OLARAK YÃœZEY PÃœRÃœZLÃœLÜĞÜNE ETKÄ°SÄ°NÄ°N DENEYSEL OLARAK Ä°NCELENMESÄ° Gökkaya, Hasan; Sur, Gökhan; Dılıpak, Hakan // Teknoloji;Jul-Sep2004, Vol. 7 Issue 3, p473 

    In this study, steel AISI 1030 was machined a with cutting tool coated by different elements on a CNC lathe without using cooling liquid. These experimental studies were executed with three different cemented carbide coated with three layers (top layer is TiN) using CVD method and coated with...

  • The Development Of Coated Grades Of CARBIDE TOOLS. Pålsson, Mia; Richt, Christer // American Machinist;Dec2007, Vol. 151 Issue 12, p11 

    The article focuses on the development of coated carbide tool inserts. It notes that the balance of wear resistance and toughness of the inserts led to high material removal rates and long life. It mentions that the basic insert or the substrate offers most of the needed toughness for the...

  • CHEMICAL VAPOUR DEPOSITION TECHNIQUE USED FOR COATINGS AN ASSESSMENT OF CURRENT STATUS. Apreutesei, Mihai; Arvinte, Ionela Roxana; Blaj, Emilia // Metalurgia;jun2010, Vol. 62 Issue 6, p33 

    Chemical vapor deposition is a versatile deposition technique that provides a means of growing thin films of elemental and compound semiconductors, metal alloys and amorphous or crystalline compounds of different stoichiometry. The chemistry richness of a CVD process makes the technique so...

  • Coatings for problem-material turning. Benes, Jim // American Machinist;Sep2008, Vol. 152 Issue 9, p10 

    The article focuses on the two principal coating processes for indexable inserts. It includes chemical vapor deposition process and the physical vapor deposition process. The chemical vapor deposition process involves high temperatures and produces relatively thick coatings with a high degree of...

  • Cutting Tool Coating Production. Drape, Duane // Production Machining;Sep2011, Vol. 11 Issue 9, p38 

    The article focuses on the coating process of a cutting tool. It discusses the two primary processes in place for coating cutting tools, the chemical vapor deposition (CVD) and the physical vapor deposition (PVD), along with their own advantages and disadvantages. It also highlights the five...

  • A Guide to Insert Coating Processes and Materials. Graham, Don // Production Machining;Dec2012, Vol. 12 Issue 12, p26 

    The article offers a guideline to insert coating processes and materials when machining super alloys. It suggests to use a coated insert most of the time in this process, especially when cutting alloys with machinability ratings from medium to high. It states that the two main coating processes...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics