TITLE

Temperature measurements of heated microcantilevers using scanning thermoreflectance microscopy

AUTHOR(S)
Kim, Joohyun; Han, Sunwoo; Walsh, Timothy; Park, Keunhan; Jae Lee, Bong; King, William P.; Lee, Jungchul
PUB. DATE
March 2013
SOURCE
Review of Scientific Instruments;Mar2013, Vol. 84 Issue 3, p034903
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We report the development of scanning thermoreflectance thermometry and its application for steady and dynamic temperature measurement of a heated microcantilever. The local thermoreflectance signal of the heated microcantilever was calibrated to temperature while the cantilever was under steady and periodic heating operation. The temperature resolution of our approach is 0.6 K, and the spatial resolution is 2 μm, which are comparable to micro-Raman thermometry. However, the temporal resolution of our approach is about 10 μsec, which is significantly faster than micro-Raman thermometry. When the heated microcantilever is periodically heated with frequency up to 100 kHz, we can measure both the in-phase and out-of-phase components of the temperature oscillation. For increasing heating frequency, the measured cantilever AC temperature distribution tends to be confined in the vicinity of the heater region and becomes increasingly out of phase with the driving signal. These results compare well with finite element simulations.
ACCESSION #
86446718

 

Related Articles

  • 2-ω and 3-ω temperature measurement of a heated microcantilever. Lee, Byeonghee; King, William P. // Review of Scientific Instruments;Jul2012, Vol. 83 Issue 7, p074902 

    This article describes temperature measurement of a heated atomic force microscope cantilever using the 2ω and 3ω harmonics of the cantilever temperature signal. When the cantilever is periodically heated, large temperature oscillations lead to large changes in the cantilever electrical...

  • Laser Actuation of Cantilevers for Picometre Amplitude Dynamic Force Microscopy. Evans, Drew R.; Tayati, Ponlawat; Hongjie An; Ping Koy Lam; Craig, Vincent S. J.; Senden, Tim J. // Scientific Reports;7/4/2014, p1 

    As nanoscale and molecular devices become reality, the ability to probe materials on these scales is increasing in importance. To address this, we have developed a dynamic force microscopy technique where the flexure of the microcantilever is excited using an intensity modulated laser beam to...

  • Discussion on the Measurements in Cantilever Construction with Guyed Hanging Basket. Fangru Gui // Applied Mechanics & Materials;2014, Issue 580-583, p2797 

    Guyed hanging basket is qualified with reasonable structure, great carrying ability and clear construction process, and also can provide a good operating space for beam segment construction. Applying cantilever pouring construction with guyed hanging basket should be the development direction of...

  • Design of a variable temperature scanning force microscope. Nazaretski, E.; Graham, K. S.; Thompson, J. D.; Wright, J. A.; Pelekhov, D. V.; Hammel, P. C.; Movshovich, R. // Review of Scientific Instruments;Aug2009, Vol. 80 Issue 8, p083704 

    We have developed the variable temperature scanning force microscope capable of performing both magnetic resonance force microscopy (MRFM) and magnetic force microscopy (MFM) measurements in the temperature range between 5 and 300 K. Modular design, large scanning area, and interferometric...

  • Solving Erosion-Related Thermowell FAILURES. Johnson, Mitch // Flow Control;Jul2013, Vol. 19 Issue 7, p32 

    The article presents a case study on addressing erosion-related thermowell failures. The author talks about the effects of solid particle erosion on thermowells and the top causes of thermowells failure. She also tackles the alternative to hard-faced thermowells and the things to consider when...

  • Untitled.  // Farmers Weekly;11/1/2013, Vol. 159 Issue 43, p29 

    The article previews the ThemoBolus instrument for measuring the temperature of herd's reticulo-rumen from Medria Elevage.

  • DENSITOMETRY AND THERMOMETRY OF STARBURST GALAXIES. Mangum, J. G.; Darling, J.; Menten, K. M.; Henkel, C.; MacGregor, M. // EAS Publications Series;2011, Vol. 52, p71 

    With a goal toward deriving the physical conditions in external galaxies, we present a survey of formaldehyde (H2CO) and ammonia (NH3) emission and absorption in a sample of starburst galaxies using the Green Bank Telescope. By extending well-established techniques used to derive the spatial...

  • Size-Dependent Dynamic Behavior of a Microcantilever Plate. Xiaoming Wang; Fei Wang // Journal of Nanomaterials;2012, p1 

    Material length scale considerably affects the mechanical properties of microcantilever components. Recently, cantilever-plate-like structures have been commonly used, whereas the lack of studies on their size effects constrains the design, testing, and application of these structures. We have...

  • Research on the Field Dynamic Balancing Technology and Instrument for A High Speed Cantilever Rotor. Zhi Xin Zhang; Yu Long Fu; Shi Zheng He; Ji Yong Kuang // Applied Mechanics & Materials;2014, Issue 630-642, p1220 

    The principle of balancing a high speed cantilever rotor at full speed has been put forward by low-speed and high-speed balancing. The portable field dynamic balancing instrument based on the microcontroller is discussed from the hardware, the software and the signal process in detail. With the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics