COTFAS, Petru A.; COTFAS, Daniel T.; SAMOILA, Cornel; VIZUREANU, Petrică; VARGA, Bela; URSUTIU, Doru; ZAMFIRA, Sorin
May 2013
Metalurgia International;May2013, Vol. 18 Issue 5, p285
Academic Journal
When a new category of shape memory alloys is manufactured, transformation temperatures measurement becomes compulsory for a complete characterization. In the paper the authors propose two measurement methods for the intrinsic characteristic, one using dilatation measurement and the other using the resistance measurement. Measurement devices and results are also presented, with comments on the compensation needed in each case.


Related Articles

  • Role of magnetostatic interactions in micromagnetic structure of multiferroics. Armstrong, Jason N.; Sullivan, M. R.; Le Romancer, Maëlane; Chernenko, Volodymyr A.; Chopra, Harsh Deep // Journal of Applied Physics;Jan2008, Vol. 103 Issue 2, p023905 

    While it is well known that magnetoelastic coupling governs the magnitude of field-induced strain in magnetic shape memory alloys, the present study shows that the zero-field micromagnetic structure and the pathway leading to the field-induced strain is governed by magnetostatic coupling across...

  • Heat Estimation from Infrared Measurement Compared to DSC for Austenite to R Phase Transformation in a NiTi Alloy. Delobelle, V.; Favier, D.; Louche, H. // Journal of Materials Engineering & Performance;Jun2013, Vol. 22 Issue 6, p1688 

    Heat source estimations from temperature field measurements deduced from infrared imaging are increasingly used to study thermo-mechanical coupling during materials' deformation. These estimations are based on approximations of the derivative terms with respect to time and space which are...

  • A micromechanical model for pretextured polycrystalline shape-memory alloys including elastic anisotropy. Hackl, Klaus; Heinen, Rainer // Continuum Mechanics & Thermodynamics;Mar2008, Vol. 19 Issue 8, p499 

    We present a micromechanical model for polycrystalline shape-memory alloys which is capable of reproducing important aspects of the material behavior such as pseudoelasticity, pseudoplasticity, tension�compression asymmetry and the influence of texture inhomogeneities which may occur from...

  • Magnetic and martensitic transformations of NiMnX(X=In,Sn,Sb) ferromagnetic shape memory alloys. Sutou, Y.; Imano, Y.; Koeda, N.; Omori, T.; Kainuma, R.; Ishida, K.; Oikawa, K. // Applied Physics Letters;11/8/2004, Vol. 85 Issue 19, p4358 

    Martensitic and magnetic transformations of the Heusler Ni50Mn50-yXy (X=In, Sn and Sb) alloys were investigated by differential scanning calorimetry measurement and the vibrating sample magnetometry technique. In all these alloy systems, the austenite phase with the ferromagnetic state was...

  • Austenite–martensite interface in shape memory alloys. Lei, C. H.; Li, L. J.; Shu, Y. C.; Li, J. Y. // Applied Physics Letters;4/5/2010, Vol. 96 Issue 14, p141910 

    A two-scale phase field simulation is developed for austenite–martensite interface to understand the effects of crystalline symmetry and geometric compatibilities on the reversibility of structural phase transformations in shape memory alloys. It is observed that when the middle...

  • Effect of annealing on the martensitic transformation and magnetocaloric effect in Ni44.1Mn44.2Sn11.7 ribbons. Xuan, H. C.; Xie, K. X.; Wang, D. H.; Han, Z. D.; Zhang, C. L.; Gu, B. X.; Du, Y. W. // Applied Physics Letters;6/16/2008, Vol. 92 Issue 24, p242506 

    The Ni44.1Mn44.2Sn11.7 ribbons were prepared by melt spinning. A single-phase austenite with L21 structure was confirmed in the melt-spun ribbons at room temperature. After the heat treatment, the martensitic transformation temperature increases obviously in the annealed ribbons. This method may...

  • Controlling of Transformation Temperatures of Cu–Al–Mn Shape Memory Alloys by Chemical Composition. AKSU CANBAY, C.; KARAGOZ, Z.; YAKUPHANOGLU, F. // Acta Physica Polonica, A.;May2014, Vol. 125 Issue 5, p1163 

    The Cu–Al–Mn shape memory alloys having various chemical compositions were prepared by arc melting method to control the phase transformation parameters. The phase transformation parameters and structural properties of the alloys were investigated by differential scanning...

  • Texture memory and strain-texture mapping in a NiTi shape memory alloy. Ye, B.; Majumdar, B. S.; Dutta, I. // Applied Physics Letters;8/6/2007, Vol. 91 Issue 6, p061918 

    The authors report on the near-reversible strain hysteresis during thermal cycling of a polycrystalline NiTi shape memory alloy at a constant stress that is below the yield strength of the martensite. In situ neutron diffraction experiments are used to demonstrate that the strain hysteresis...

  • Investigation of Austenite-Martensite Transformation of Shape Memory Alloys. SZABÓ, Sándor; DEZSŐ, Gergely // Scientific Bulletin Series C: Fascicle Mechanics, Tribology, Mac;2015, Vol. 2015 Issue 29, p76 

    Shape memory alloys were investigated during martensite - austenite transformation. The transformation was forced and controlled by change of sample temperature and uniaxial stress. Acoustic and thermal signals were collected and evaluated. Theoretical background and computer modeling were also...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics