TITLE

POLYMER CONCRETE, CORRELATIONS BETWEEN PROPERTIES

AUTHOR(S)
ION, Ioana; STANCIU, Darius; BARROSO AGUIAR, José; ANGELESCU, Nicolae
PUB. DATE
May 2013
SOURCE
Metalurgia International;May2013, Vol. 18 Issue 5, p236
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Has been adopted new method for determining the fluidity concrete with polymers. In the research were used three types of polmeri: epoxy resin - a rale of 10% polyurelhane - at a rate of 10% methylcellulose - a rate of 0.6% The experimental results showed that the same water / cement material behaves differently depending on the polymer used. Moreover, epoxy resin gives significant improvements in workability and strength. It was found that the polymer influence positively the mechanical properties and concrete workability. Were performed mycroscopical investigations on reinforced concrete structures.
ACCESSION #
86444124

 

Related Articles

  • Mechanical Characteristics Investigation of Polymer Concrete Using Mixture Design of Experiments and Response Surface Method. Bârbuțâ, Marinela; Lepâdatu, Daniel // Journal of Applied Sciences;2008, Vol. 8 Issue 12, p2242 

    The aim of this study is using a statistical investigation to analyze data from mixture experiment design and involve regression models to determine the response surface of polymer concrete. The experimental studies were realized on polymer concrete prepared of epoxy resin, Silica Fume (SUF) and...

  • A Novel Polymer Concrete Made From Fine Silica Sand and Polyester. Shokrieh, M.; Rezvani, S.; Mosalmani, R. // Mechanics of Composite Materials;Nov2015, Vol. 51 Issue 5, p571 

    In order to improve the mechanical properties and decrease the manufacturing costs of traditional polymer concrete, a new concrete mix is presented, where fine silica sand is used instead of common large and small aggregates. In addition, to decrease manufacturing costs, a polyester resin is...

  • A Review on Epoxy and Polyester Based Polymer Concrete and Exploration of Polyfurfuryl Alcohol as Polymer Concrete. Kumar, Rakesh // Journal of Polymers;2016, Vol. 2016, p1 

    Petroleum based epoxy and polyester based thermoset resins can be used to produce high-quality polymer concrete. However, petroleum based resources are finite and this has necessitated the development of thermoset bioresins to be used as polymer concrete. Furfuryl alcohol (FA), a thermoset...

  • WASTES USED IN OBTAINING POLYMER COMPOSITE. Bărbuţă, Marinela; Ţăranu, Nicolae; Harja, Maria // Environmental Engineering & Management Journal (EEMJ);Sep/Oct2009, Vol. 8 Issue 5, p1145 

    In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part...

  • Flexural Fatigue-Life Assessment and Strength Prediction of Glass Fibre Reinforced Polymer Concrete Composites. Bedi, Raman; Singh, S. P.; Chandra, Rakesh // ISRN Otolaryngology;2014, p1 

    The paper presents the results of an investigation conducted to assess the fatigue-life and prediction of flexural fatigue strength of polymer concrete composites based on epoxy resin as binder material. Three point flexural fatigue tests were conducted on polymer concrete specimens using MTS...

  • Hômérséklet hatása a polimerbeton mechanikai tulajdonságaira. ILONA, NÉMETH ORSOLYA; ÉVA, MAJOROSNÉ LUBLÓY; GYÖRGY, FARKAS // Epitoanyag - Journal of Silicate Based & Composite Materials;2012, Vol. 2012 Issue 3/4, p60 

    The polymer concrete is defined as a concrete in which the binding material is some kind of polymer. Consequently, the mechanical properties and the possible applications are essentially influenced by the change of temperature and the load caused by fire. In our study we introduce the changes...

  • Experimental Evaluation of Factors Affecting Monotonic and Fatigue Behavior of Fiber-Reinforced Polymer-to-Concrete Bond in Reinforced Concrete Beams. Harries, Kent A.; Reeve, Benjamin; Zorn, Andrew // ACI Structural Journal;Nov/Dec2007, Vol. 104 Issue 6, p667 

    An experimental study of a number of factors believed to affect the performance of carbon fiber-reinforced polymer (CFRP)-to-concrete bond is presented. Bending tests on 18 moderate scale beams, measuring 254 x 152 x 4875 mm (10 x 6 x 192 in.), are presented. Two samples were tested as...

  • Bond performance of reinforcing bars in inorganic polymer concrete (IPC). Sofi, M.; Deventer, J.; Mendis, P.; Lukey, G. // Journal of Materials Science;May2007, Vol. 42 Issue 9, p3107 

    The basic mechanical and chemical properties of fly-ash-based inorganic polymer concretes (IPC) have been studied widely, but, key engineering and structural properties of the material for instance modulus of elasticity, compressive, tensile, flexural strengths and bonding strength of the...

  • Time-Dependent Behavior of Reinforced Polymer Concrete Columns under Eccentric Axial Loading. Berardi, Valentino Paolo; Mancusi, Geminiano // Materials (1996-1944);Nov2012, Vol. 5 Issue 11, p2342 

    Polymer concretes (PCs) represent a promising alternative to traditional cementitious materials in the field of new construction. In fact, PCs exhibit high compressive strength and ultimate compressive strain values, as well as good chemical resistance. Within the context of these benefits, this...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics