TITLE

MICROSTRUCTURAL CHANGES OCCURRED DURING THERMOMECHANICAL PROCESSING OF Ti- 6A1-7Nb ALLOY

AUTHOR(S)
CINCA, Ion; PETRESCU, Mircea Ionuţ
PUB. DATE
May 2013
SOURCE
Metalurgia International;May2013, Vol. 18 Issue 5, p84
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents some scientific results referring to structural characteristics of a Ti-Al-Nb alloy, processed by plastic deformation and heat treatment. In order to investigate structural characteristics two different phase states were used, the "lower" temperature phase (α+β) (~ 930°C) processed by plastic deformation, using a deformation degree ε = 35% and same (α+β) phase processed by plastic deformation and heat treated.
ACCESSION #
86444095

 

Related Articles

  • Reverse Transformation of Deformation-Induced Phases and Associated Changes in the Microstructure of Explosively Clad Ti-5Ta-2Nb and 304L SS. Prasanthi, T.; Sudha, C.; Murugesan, S.; Thomas Paul, V.; Saroja, S. // Metallurgical & Materials Transactions. Part A;Oct2015, Vol. 46 Issue 10, p4429 

    Ti-5Ta-2Nb alloy was joined to 304L austenitic stainless steel by explosive cladding technique. Explosive cladding resulted in the formation of deformation-induced martensite in 304L SS and fcc phase of Ti in the Ti-5Ta-2Nb side of the joint. The stability of these metastable phases was...

  • Effect of severe plastic deformation and thermomechanical treatment on the structure and properties of titanium. Sadikova, G. Kh.; Latysh, V. V.; Semenova, I. P.; Valiev, R. Z. // Metal Science & Heat Treatment;Nov2005, Vol. 47 Issue 11/12, p512 

    The effect of different modes of combined treatment on the microstructure and mechanical properties of long-length semiproducts from commercial purity titanium is studied. The combined production process includes equal-channel angular pressing followed by thermomechanical treatment. Special...

  • The Influence of Thermomechanical Treatment on the Complex Modulus of Mg Alloy AZ31. Munitz, A.; Ricker, R. E.; Pitchure, D. J.; Kimmel, G. // Metallurgical & Materials Transactions. Part A;Sep2005, Vol. 36 Issue 9, p2403 

    Dynamic modulus analyses were performed on Mg alloy AZ31 following thermomechanical treatments to enable investigation of the influence of microstructural features created by plastic deformation on the elastic and the anelastic behavior of this alloy as quantified by variations in the complex...

  • Effect of the microstructure of titanium alloys on the fatigue strength characteristics. Herasymchuk, O.; Nalimov, Yu.; Markovs'kyi, P.; Terukov, A.; Bondarchuk, V. // Strength of Materials;May2011, Vol. 43 Issue 3, p282 

    The fatigue test results and the mechanical characteristics in static tension are obtained for specimens of titanium alloys belonging to the known classes of materials with a reference globular or bimodal microstructure and the so-called fine-grained β-transformed microstructure provided by...

  • Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment. Semiatin, S.; Kinsel, K.; Pilchak, A.; Sargent, G. // Metallurgical & Materials Transactions. Part A;Aug2013, Vol. 44 Issue 8, p3852 

    The effect of preheat time, prestrain, cooling rate, and concurrent deformation during cooling on the preferential selection of hcp alpha variants during the decomposition of the high-temperature, bcc beta phase in two-phase titanium alloys was established using Ti-6Al-4V sheet material. For...

  • NONDESTRUCTIVE EVALUATION OF NI-TI SHAPE MEMORY ALLOY. Meir, S.; Gordon, S.; Karsh, M.; Wiezman, A.; Ayers, R.; Olson, D. L. // AIP Conference Proceedings;6/23/2011, Vol. 1335 Issue 1, p1208 

    The nondestructive evaluation of nickel titanium (Ni-Ti) alloys for applications such as heat treatment for biomaterials applications (dental) and welding was investigated. Ni-Ti alloys and its ternary alloys are valued for mechanical properties in addition to the shape memory effect. Two...

  • Effect of thermomechanical processing on evolution of various phases in Ti-Nb alloys. Banumathy, S.; Prasad, K.; Mandal, R.; Singh, A. // Bulletin of Materials Science;2011, Vol. 34 Issue 7, p1421 

    This paper deals with the effect of thermomechanical processing on microstructural evolution of three alloys, viz. Ti-8Nb, Ti-12Nb and Ti-16Nb. The alloys were hot rolled at 800°C and then subjected to various heat treatments. Samples from hot-rolled alloys were given solution-treatment in...

  • Ultrafine Grain Formation in a Ti-6Al-4V Alloy by Thermomechanical Processing of a Martensitic Microstructure. Chao, Qi; Hodgson, Peter; Beladi, Hossein // Metallurgical & Materials Transactions. Part A;May2014, Vol. 45 Issue 5, p2659 

    In the current study, ultrafine equiaxed grains with a size of 150 to 800 nm were successfully produced in a Ti-6Al-4V alloy through thermomechanical processing of a martensitic starting microstructure. This was achieved through a novel mechanism of grain refinement consisting of several...

  • Effect of Low-Temperature Oxidation and Oxynitriding on the Fretting Corrosion of VT22 Titanium Alloy. Dukhota, O.; Pohrelyuk, I.; Molyar, O.; Pichuhin, A.; Luk'yanenko, O. // Materials Science;Sep2012, Vol. 48 Issue 2, p213 

    We have investigated the influence of oxide and oxynitride layers, formed at the stage of aging ( T = 620°C, t = 7 h), on the fretting resistance of VT22 titanium alloy (Ti-5Al-4.75Mo-4.75V-1Cr-1Fe) for the optimization of phase-structural state of the modified layer. It has been found that...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics