TITLE

MODIFIED COMPOSITE RESINS IN MEDICAL PRACTICE - THEORETICAL, PHYSIOLOGICAL AND PRACTICAL ASPECTS

AUTHOR(S)
BURLIBAŞA, Mihai; FERECHIDE, Dumitru; PAHONI, Dan; TĂNASE, Gabricla; BURCEA, Claudia
PUB. DATE
May 2013
SOURCE
Metalurgia International;May2013, Vol. 18 Issue 5, p22
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Composite resins have been successfully used in medical practice in Romania since 1970. They have been used in many medical branches such as orthopaedics, urology, cardiovascular surgery, and they have been found very useful in dental medicine. Thus composite resins have been continuously developed, modified and improved.
ACCESSION #
86444080

 

Related Articles

  • Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing. Suwanprateeb, J.; Sanngam, R.; Suwanpreuk, W. // Journal of Materials Science: Materials in Medicine;Jul2008, Vol. 19 Issue 7, p2637 

    Hydroxyapatite/bis-GMA composites were processed by new technique which comprised three dimensional printing (3DP) of hydroxyapatite and then impregnation by bis-GMA based resin. Two types of composites which used either as-fabricated green 3DP samples or 1,300°C sintered 3DP samples were...

  • FIBERGLASS GLUE.  // Technotrends Newsletter;Aug2010, Vol. 26 Issue 8, p2 

    The article reports on the development of polymer resin which could revolutionize the use of lightweight plastic composites for the construction of aircraft, boats, automobiles, and wind generators.

  • WIND BRIEF.  // Composites Technology;Jun2010, Vol. 16 Issue 3, p11 

    The article announces the April 9, 2010 opening of the new resin production facility of Hexion Specialty Chemicals in Esslingen, Germany.

  • Effect of alumina reinforcing fillers in BisGMA-based resin composites for dental applications. Sanjay Thorat; Diaspro, Alberto; Salerno, Marco // Advanced Materials Letters;Jan2013, Vol. 4 Issue 1, p15 

    A photo-polymerizable resin based on bisphenol-A-glycidyldimethacrylate monomer was loaded at both 10 and 50% by weight with particles of alumina of size scales in the 10 micrometers and submicrometer order, termed micro-alumina and nano-alumina, respectively. After curing, the viscoelastic...

  • Correlating thermodynamic and mechanical adhesion phenomena for thermoplastic polyolefins. Burnett, Daniel J.; Thielmann, Frank; Ryntz, Rose A. // Journal of Coatings Technology & Research;Jun2007, Vol. 4 Issue 2, p211 

    Polyolefins are used over a wide range of industries due to their low cost and adaptable mechanical properties. However, their low surface energy makes fabricating composites and applying coatings challenging. Therefore, various surface treatments have been utilized to enhance their adhesion...

  • Going pear shaped. Howell, David // Professional Engineering;07/21/99, Vol. 12 Issue 14, p32 

    Focuses on the composite polyether amide resin (PEAR) composite material. Features of the resin system; Potential applications in industrial settings. INSET: The pear essentials..

  • Optically-induced growth of fiber patterns into a photopolymerizable resin. Shoji, Satoru; Kawata, Satoshi // Applied Physics Letters;8/2/1999, Vol. 75 Issue 5, p737 

    Presents evidence of optically-induced growth of fiber patterns into a photopolymerizable resin. Achievement of optical growth of a single or multiple fibers by focusing an ultraviolet laser light into the photopolymerization of the resin upon light irradiation; Production of an increase of the...

  • 2-naphthalenesulfonic acid adsorption on composite weakly basic resin. Shan Yu; Changhai Li; Dongmei Jia // Advanced Materials Research;2014, Issue 1044-1046, p34 

    The hydroxyl alumina impregnated weakly basic resin composite (D301Al) successfully prepared through incorporation of hydroxyl alumina into the D301 resin for 2-naphthalenesulfonic acid (2-NSA) removal from aqueous solution. The structure of D301Al was examined using scanning electron microscopy...

  • Effect of two lasers on the polymerization of composite resins: single vs combination. Ro, Jung-Hoon; Son, Sung-Ae; Park, Jeong-kil; Jeon, Gye-Rok; Ko, Ching-Chang; Kwon, Yong // Lasers in Medical Science;Jul2015, Vol. 30 Issue 5, p1497 

    The selection of a light-curing unit for the curing composite resins is important to achieve best outcomes. The purpose of the present study was to test lasers of 457 and 473 nm alone or in combination under different light conditions with respect to the cure of composite resins. Four different...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics