TITLE

EXPERIMENTAL AND FEM ANALYSIS OF SINTERED STEEL WORM GEAR WEAR

AUTHOR(S)
Miltenović, Aleksandar; Nikolić, Vlastimir; Milovančević, Miloš; Banić, Milan
PUB. DATE
October 2012
SOURCE
Transactions of FAMENA;2012, Vol. 36 Issue 4, p85
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Crossed helical gears with steel worms and sintered steel wheels are widely used in motor vehicles and household appliances. Besides the experimental study of a prototype transmission, the simulation using the finite element method (FEM) is another possibility to test gears under load in the design phase and to optimize them. As part of this paper, a piece of software was developed that enables calculation of wear-related variables, such as the Hertzian stress σH, the minimum lubrication film thickness hmin and the glide path sg for every single point of the contact between worm and worm gear.
ACCESSION #
86442426

 

Related Articles

  • Static Performance Analysis of Foil Thrust Bearing Based on Thin Plate Theory. Jianjun Zhu; Jianjun Du; Bing Li; Changlin Li; Dun Liu // Key Engineering Materials;2014, Vol. 621, p437 

    The thrust foil bearing, as one of the key parts in high-speed rotating machineries, is used to sustain the axial force, and its load performance has a crucial relationship with the structural parameters and working condition. In this paper the top foil is modeled as a thin plate supported by...

  • Effect of Asperity Plastic Deformation on the Interface Friction in Metal Forming. Chuhan Wu; Liangchi Zhang; Shanqing Li; Zhenglian Jiang; Peilei Qu // Key Engineering Materials;2014, Vol. 626, p222 

    This paper investigates the effect of the plastic deformation of surface asperities on the interface friction in metal forming involving multi-scale deformation with random surface topography. The equivalent interfacial layer (EIL) introduced by the authors previously was used to integrate the...

  • Experimental and Finite Element Studies on Formability of Low Carbon Steel Sheets using Deep Drawing. Mayavan, T.; Karthikeyan, L. // International Journal of Engineering Science & Technology;Feb/Mar2013, Vol. 5 Issue 1, p165 

    One of the commonly used metal forming processes is deep drawing, in which circular blanks are converted into a cup or shell with good surface finish. In this paper, the forming characteristics of Deep Draw Steel (DDS), a low-carbon steel with many engineering and automotive applications, is...

  • Effect of Water Gap in Delivery System on Twin Roll Strip Caster by Simulation. Luocheng Yang; Hongxi zhu; Chengji Deng; Wenjie Yuan; Jun Ding // Key Engineering Materials;2014, Vol. 602-603, p652 

    In continuous casting process, the mould is the core of the continuous caster, and the vast majority of the surface defects of steel are originated in the crystallizer. Choosing a reasonable water gap in the delivery system is particularly important, especially in twin roll strip continuous...

  • Dissipative Capacity Analysis of Steel Building Using Viscous bracing Device. Ras, Abdelouahab; Boukhari, Baghdad; Boumechra, Nadir; Hamdaoui, Karim // International Proceedings of Chemical, Biological & Environmenta;2013, Vol. 62, p17 

    This study is focussed on Energy dissipation system provided by Fluid Viscous Dampers (FVD). A 3D numerical investigation is done considering the seismic response of a twelve-story steel building moment frame with diagonal FVD that have linear force versus velocity behavior. The time history of...

  • A Model for Predicting the Yield Strength Difference between Pipe and Plate of Low-Carbon Microalloyed Steel. Zhang, Wenlong; Ding, Dongyan; Gu, Mingyuan // Metallurgical & Materials Transactions. Part A;Dec2012, Vol. 43 Issue 13, p5308 

    A combination of finite-element calculation and tension-compression tests was employed to predict the yield strength difference between the pipe and plate of low-carbon microalloyed steel (LCMS) in the production of high-frequency straight bead welding pipes (HFSBWPs). The deformation process...

  • Study of area replacement reinforcement effect for the opening of a cylinder vessel by using FEM. PENG Peiying; LIU Qinggang // Journal of Hebei University of Science & Technology;Aug2014, Vol. 35 Issue 4, p366 

    According to stress assessment methods in the standard of steel pressure vessel- design by stress analysis (JB 4732 - 1995), two paths were constructed, including a traditional pathl and a path2 recommended by pressure vessel GB 150 - 2011, and the minimum thickness of the nozzles for openings...

  • Formability Discussion in Dieless Drawing of Stainless Steel Tubes. Yeong-Maw Hwang; Zong-Sian Li; Tsu-Yu Lin // Key Engineering Materials;2014, Vol. 626, p10 

    Stainless steel tubes are widely used in various fields, such as electrode tubes, probe tubes, electronic parts, painless injection needles, and micro-nozzles etc. In this study, a self-developed prototype dieless drawing machine is used to explore the formability of the dieless drawing process...

  • Bulk-Forming Simulation of Bimetallic Watchcase Components. Kong, T.; Chan, L. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Oct2014, Vol. 66 Issue 10, p2145 

    This article presents a study of the effects of process parameters in bulk-forming bimetallic watchcase components using finite-element (FE) simulation. This study aimed to determine the suitable forming temperature T and ram speed S for attaining the complete die filling of bimetals. A...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics