TITLE

Kinetic of phase transformation of SrBi[sub 2]Ta[sub 2]O[sub 9] deposited by metalorganic decomposition on platinum electrodes

AUTHOR(S)
Moert, M.; Mikolajick, T.; Schindler, G.; Nagel, N.; Hartner, W.; Dehm, C.; Kohlstedt, H.; Waser, R.
PUB. DATE
December 2002
SOURCE
Applied Physics Letters;12/2/2002, Vol. 81 Issue 23, p4410
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
SrBi[sub 2]Ta[sub 2]O[sub 9] thin films were prepared by metalorganic decomposition on Pt/Ti/SiO[sub 2]/Si substrates and subsequently crystallized at temperatures ranging from 600 to 700°C for 40 to 225 min. Data of the Aurivillius surface coverage taken from atomic force microscopy measurements were used to model the kinetics of isothermal phase transformation from the fluorite to the Aurivillius phase. A two-dimensional growth mechanism at a decreasing nucleation rate can be deduced. By evaluating the temperature dependence of the growth rates, an activation energy for phase transformation of 318 kJ/mol is determined.
ACCESSION #
8563538

 

Related Articles

  • Oxygen vacancy mobility determined from current measurements in thin Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3] films. Zafar, Sufi; Jones, Robert E.; Jiang, Bo; White, Bruce; Chu, Peir; Taylor, D.; Gillespie, Sherry // Applied Physics Letters;7/13/1998, Vol. 73 Issue 2 

    The current density is measured as a function of time for thin (<=1000 Ã…) barium strontium titanate (BST) capacitors with platinum electrodes. The current density curve shows a peak prior to the onset of resistance degradation. The peak position on the time axis varies with applied voltage...

  • Depletion layer thickness and Schottky type carrier injection at the interface between PT... Hwang, Cheol Seong; Lee, Byoung Taek // Journal of Applied Physics;1/1/1999, Vol. 85 Issue 1, p287 

    Presents information on a study which proposed a band model based on the partial depletion model to solve the contradiction on film thickness relationship in platinum electrodes. Experimental procedure; Results and discussion; Conclusion.

  • Improvements in electrical properties of (Ba,Sr)TiO[sub 3] capacitor with chemical vapor... Jong Myeong Lee; Sang Yeol Kang; Ju Cheol Shin; Won Joon Kim; Cheol Seong Hwang; Hyeong Joon Kim // Applied Physics Letters;6/6/1999, Vol. 74 Issue 23, p3489 

    Studies the electrical properties of (Bs,Sr)TiO[sub 3] (BST) thin films with sputtered and metal organic chemical vapor deposited Pt top electrodes. Leakage current showed by BST films; Improvement of electrical properties caused by the reduction of interface trap sites with the incorporation...

  • Highly aligned, spin polarized thin films of Sr[sub 2]FeMoO[sub 6] by a chemical vapor process. Rager, J.; Berenov, A. V.; Cohen, L. F.; Branford, W. R.; Bugoslavsky, Y. V.; Miyoshi, Y.; Ardakani, M.; MacManus-Driscoll, J. L. // Applied Physics Letters;12/23/2002, Vol. 81 Issue 26, p5003 

    Highly oriented films of Sr[sub 2]FeMoO[sub 6] were fabricated by ultrasonic spray pyrolysis. A combined organic/inorganic solution was developed and the films were deposited on single-crystal LaA1O[sub 3] between 600°C and 900°C followed by postannealing at 850°C or 1200°C in Ar/5%...

  • Metal–insulator–metal transition in Sr[sub 2]Rh[sub 1-x]Ru[sub x]O[sub 4](0≤x≤1). Koida, T.; Wakisaka, T.; Itaka, K.; Koinuma, H.; Matsumoto, Y. // Applied Physics Letters;12/23/2002, Vol. 81 Issue 26, p4955 

    Structural and electrical properties of c-axis oriented epitaxial Sr[sub 2]Rh[sub 1-x]Ru[sub x]O[sub 4] (0≤x≤ 1) films were systematically investigated. The composition-spread films were fabricated on a temperature gradient (LaA1O[sub 3])[sub 0.3](Sr[sub 2]A1TaO[sub 6])[sub 0.7]...

  • Improvement of the conducting parameters of YBa[sub 2]Cu[sub 3]O[sub x] films grown on sapphire through the use of a strontium titanate buffer layer. Ovsyannikov, G. A.; Mashtakov, A. D.; Mozhaev, P. B.; Komissinskii, F. V.; Ivanov, Z. G.; Larsen, P. // Technical Physics Letters;Sep98, Vol. 24 Issue 9, p676 

    High-T[sub c] superconducting films of YBa[sub 2]Cu[sub 3]O[sub x] on sapphire with an additional buffer layer of strontium titanate (actually, on heterostructures (100)SrTiO[sub 3]/(001)YBa[sub 2]Cu[sub 3]O[sub x]/ (100)CeO[sub 2]/(1102)Al[sub 2]O[sub 3]) are obtained by laser deposition, and...

  • Influence of light on the coercive field of repoled strontium barium niobate: The role of secondary repoling. Smith, Peter G. R.; Eason, Robert W. // Applied Physics Letters;9/9/1996, Vol. 69 Issue 11, p1509 

    We have found that the application of light to strontium barium niobate (SBN) during electrical repoling stabilizes the newly formed domains. This stabilization becomes apparent when repoling the crystal back into its original domain direction as a change in the distribution of displacement...

  • Temperature dependence of photorefractive properties of strontium-barium niobate (Sr0.6Ba0.4Nb2O6). Rytz, D.; Wechsler, B. A.; Schwartz, R. N.; Nelson, C. C.; Brandle, C. D.; Valentino, A. J.; Berkstresser, G. W. // Journal of Applied Physics;9/1/1989, Vol. 66 Issue 5, p1920 

    Analyzes the temperature dependence of the photorefractive properties of strontium-barium niobate (Sr[sub0.6]Ba[sub0.4]Nb[sub2]O[sub6]). Background on the function of the external ring phase-conjugate mirror for a strontium-barium niobate; Details of the beam coupling experiments; Description...

  • On the effect of hydrogen incorporation in strontium titanate layers grown by high vacuum... Schneider, Jochen M.; Hjorvarsson, Bjorgvin // Applied Physics Letters;11/29/1999, Vol. 75 Issue 22, p3476 

    Studies the effect of hydrogen incorporation in strontium titanate layers grown by high vacuum magnetron sputtering. Amount of hydrogen in the films and growth temperature; Microstructure of films deposited.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics