TITLE

Holographic recording in TiO[sub 2] nanoparticle-dispersed methacrylate photopolymer films

AUTHOR(S)
Suzuki, Naoaki; Tomita, Yasuo; Kojima, Takashi
PUB. DATE
November 2002
SOURCE
Applied Physics Letters;11/25/2002, Vol. 81 Issue 22, p4121
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We demonstrate permanent holographic storage in the green with high diffraction efficiency and recording sensitivity in TiO[SUB2] nanoparticle-dispersed methacrylate photopolymer films. It is shown that the diffraction efficiency as well as the recording sensitivity significantly increase with an increase of nanoparticle concentration. It is also found that volumetric shrinkage during holographic exposure is noticeably suppressed by inclusion of the nanoparticles.
ACCESSION #
8528110

 

Related Articles

  • Fabrication and characterization of superhydrophobic high opacity paper with titanium dioxide nanoparticles. Lianghui Huang; Kefu Chen; Chunxiang Lin; Rendang Yang; Gerhardt, Rosario // Journal of Materials Science;Apr2011, Vol. 46 Issue 8, p2600 

    new type of paper with superhydrophobic surface was prepared by addition of modified nano-TiO to cellulose pulp. Nano-TiO powder was first dispersed with a high-speed homogenizer, followed by surface modification with the coupling agent, 3-(trimethoxysilyl) propyl methacrylate (MPS). The...

  • Improved osteoblast response to UV-irradiated PMMA/TiO nanocomposites with controllable wettability. Shayan, Mahdis; Jung, Youngsoo; Huang, Po-Shun; Moradi, Marzyeh; Plakseychuk, Anton; Lee, Jung-Kun; Shankar, Ravi; Chun, Youngjae // Journal of Materials Science: Materials in Medicine;Dec2014, Vol. 25 Issue 12, p2721 

    Osteoblast response was evaluated with polymethylmethacrylate (PMMA)/titanium dioxide (TiO) nanocomposite thin films that exhibit the controllable wettability with ultraviolet (UV) treatment. In this study, three samples of PMMA/TiO were fabricated with three different compositional volume...

  • Nanofabrication of grating and dot patterns by electron holographic lithography. Ogai, Keiko; Kimura, Yoshihide // Applied Physics Letters;3/20/1995, Vol. 66 Issue 12, p1560 

    Examines poly-methyl methacrylate dot patterns at half the dose for line patterns to maintain whole dots. Use of atomic force microscopy; Importance of electron holographic lithography; Production of nanoscale periodic patterns.

  • Characteristics of Photopolymer Holographic Matched Filters in a van der Lugt Correlator. Ezhov, P. V.; Smirnova, T. N.; Tikhonov, E. O. // Technical Physics;Mar2001, Vol. 46 Issue 3, p322 

    Parameters of van der Lugt holographic matched filters for phase and amplitude transparencies, including random phase masks, are studied. Conditions for recording such filters in a phase self-developing photopolymer are determined. A significant difference in the recording conditions for the...

  • Erratum: “Temperature-induced changes in photopolymer volume holograms” [Appl. Phys. Lett. 73, 1337 (1998)]. Dhar, Lisa; Schnoes, Melinda G.; Wysocki, Theresa L.; Bair, Harvey; Schilling, Marcia; Boyd, Carol // Applied Physics Letters;10/12/1998, Vol. 73 Issue 15 

    Presents corrections to the article 'Temperature-induced changes in photopolymer volume holograms,' with the addition of captions to figures and diagrams.

  • Surface indentation arrays for high-throughput analysis of viscoelastic material properties. Johnson, Peter M.; Stafford, Christopher M. // Review of Scientific Instruments;Oct2009, Vol. 80 Issue 10, p103904 

    Viscoelastic relaxation processes factor into polymer performance and stability throughout an application lifetime, controlled by the polymer network structure and dynamics which occur over a wide spectrum of time scales. In this work, we detail the design and operation of an independent array...

  • Polymerization of photocurable commercial dental methacrylate-based composites. Gatti, A.; Rastelli, A.; Ribeiro, S.; Messaddeq, Y.; Bagnato, V. // Journal of Thermal Analysis & Calorimetry;Mar2007, Vol. 87 Issue 3, p631 

    Due to their excellent aesthetics, photopolymers have been extensively used in several dentistry applications. However, several problems are reported, e.g. low mechanical and abrasion resistance, shrinkage during polymerization, etc. Properties of the final restorations are intrinsically related...

  • Grafting polymers to titania nanoparticles by radical polymerization initiated by diazonium salt. Mesnage, Alice; Magied, Mohamed Abdel; Simon, Pardis; Herlin-Boime, Nathalie; J�gou, Pascale; Deniau, Guy; Palacin, Serge // Journal of Materials Science;Oct2011, Vol. 46 Issue 19, p6332 

    The grafting of biocompatible poly(hydroxyethyl) methacrylate (PHEMA) by a very simple method onto titanium dioxide nanoparticles is reported. The selected grafting process is based on the chemical reduction of diazonium salts by reducing agents in presence of the vinylic monomer. As previously...

  • Adhesive 4-META/MMA-TBB Opaque Resin with Poly(methyl methacrylate)-coated Titanium Dioxide. MATSUMURA, H.; NAKABAYASHI, N. // Journal of Dental Research;Jan1988, Vol. 67 Issue 1, p29 

    An adhesive opaque resin for veneering on cast metal was developed with 4-methacryloxyethyl trimellitate anhydride and poly (methyl methacrylate)-coated titanium dioxide prepared by aqueous phase polymerization. The opaque resin was a modified 4-META/MMA-TBB resin. The powder consisted of 20% of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics